SYNOPSIS
use Authen::Passphrase::DESCrypt;
$ppr = Authen::Passphrase::DESCrypt>new(
salt_base64 => "my",
hash_base64 => "TYK.j.88/9s");
$ppr = Authen::Passphrase::DESCrypt>new(
salt_random => 12,
passphrase => "passphrase");
$ppr = Authen::Passphrase::DESCrypt
>from_crypt('myTYK.j.88/9s');
$ppr = Authen::Passphrase::DESCrypt>new(
fold => 1,
initial => "xyzzy!!!",
nrounds => 500,
salt_base64 => "quux",
hash_base64 => "QCKcHlgVsRY");
$fold = $ppr>fold;
$initial = $ppr>initial;
$initial_base64 = $ppr>initial_base64;
$nrounds = $ppr>nrounds;
$nrounds_base64 = $ppr>nrounds_base64_4;
$salt = $ppr>salt;
$salt_base64 = $ppr>salt_base64_2;
$salt_base64 = $ppr>salt_base64_4;
$hash = $ppr>hash;
$hash_base64 = $ppr>hash_base64;
if($ppr>match($passphrase)) { ...
$passwd = $ppr>as_crypt;
$userPassword = $ppr>as_rfc2307;
DESCRIPTION
An object of this class encapsulates a passphrase hashed using some form of the DESbased Unix crypt() hash function. This is a subclass of Authen::Passphrase, and this document assumes that the reader is familiar with the documentation for that class.The crypt() function in a modern Unix actually supports several different passphrase schemes. That is not what this class is about. This class is concerned only with one family of schemes, variants of the DESbased scheme that crypt() originally implemented, which confusingly is usually referred to merely as ``crypt()''. To handle the whole range of passphrase schemes supported by the modern crypt(), see the from_crypt constructor and the as_crypt method in Authen::Passphrase.
Warning: this password scheme is weak by modern standards, and in any case does not support a large password space. Cracking crypt()ed passwords has been a routine activity since the early 1990s. This scheme is supported for compatibility reasons only, and should not be used except when compatibility is required. Do not use this in the design of any new system or for new passwords in any system that supports better passphrase schemes.
The traditional DESbased Unix crypt() password scheme
The traditional Unix crypt() password scheme is based on the DES block encryption algorithm. Using the password as a 56bit key, it passes a 64bit data block, initialised to zero, through the encryption function 25 times, and the hash is the 64bit output of this process. A 12bit salt is used to tweak the encryption algorithm.The 56bit key is extracted from the password in a very poor way. Only the first eight bytes of the password are used, and any remainder is ignored. This makes it impossible to use a passphrase, rather than a password, hence the terminology in this section. Of the eight bytes used, the top bit is also ignored; this function hails from the days of pure ASCII.
A password hash of this scheme is conventionally represented in ASCII as a 13character string using a base 64 encoding. The base 64 digits are ".``, ''/``, ''0`` to ''9``, ''A`` to ''Z``, ''a`` to ''z" (in ASCII order). The first two characters give the 12bit salt. The remaining eleven characters give the 64bit hash. Because the base 64 encoding can represent 66 bits in eleven digits, more than the 64 required, the last character of the string can only take sixteen of the base 64 digit values.
Variant DESbased Unix crypt() passphrase schemes
To make password cracking more difficult, historically some Unix sites modified the crypt() function to be incompatible with the standard one. This was easily achieved by initialising the data block to something other than the standard allbitszero. Another variation used was to increase the number of encryption rounds, which makes cracking take longer in addition to being nonstandard. Password hashes on such a system looked normal but were not interoperable with standard crypt() implementations. To interpret them properly it is necessary to know the modified parameters.BSDi standardised an extended DESbased scheme. The salt is extended to 24 bits, and the number of encryption rounds is variable. Passphrases longer than 8 characters are handled by an additional step that folds (hashes) them down to 8 characters, rather than just throwing away the characters after the eighth. Passphrase hashes in this scheme are conventionally represented in ASCII as a "_" followed by 19 characters of base 64. The first four base 64 digits give the number of encryption rounds, the next four give the salt, and the remaining eleven give the hash.
CONSTRUCTORS
 Authen::Passphrase::DESCrypt>new(ATTR => VALUE, ...)

Generates a new passphrase recogniser object using the generalised
DESbased crypt() algorithm. The following attributes may be given:

 fold
 Truth value indicating whether the BSDi passphrase folding scheme should be used for long passphrases. Default false, for compatibility with the original DESbased scheme.
 initial
 The initial data block to encrypt, as a string of exactly eight bytes. Default all bits zero, for compatibility with the original DESbased scheme.
 initial_base64
 The initial data block to encrypt, as a string of eleven base 64 digits.
 nrounds
 The number of encryption rounds to use, as a Perl integer. Default 25, for compatibility with the original DESbased scheme.
 nrounds_base64
 The number of encryption rounds to use, as a string of four base 64 digits.
 salt
 The salt, as an integer in the range [0, 16777216).
 salt_base64
 The salt, as a string of two or four base 64 digits.
 salt_random
 Causes salt to be generated randomly. The value given for this attribute must be either 12 or 24, giving the number of bits of salt to generate. The source of randomness may be controlled by the facility described in Data::Entropy.
 hash
 The hash (output of encryption), as a string of exactly eight bytes.
 hash_base64
 The hash, as a string of eleven base 64 digits.
 passphrase
 A passphrase that will be accepted.

The salt must be given, and either the hash or the passphrase. The other parameters default to those used in the original DESbased crypt().

 Authen::Passphrase::DESCrypt>from_crypt(PASSWD)

Generates a new passphrase recogniser object using the DESbased crypt()
algorithm, from a crypt string. Two forms of crypt string are supported.
The first form of crypt string must consist of 13 base 64 digits. The first two give the salt, and the next eleven give the hash. Long passphrases are not folded, the initial block is all bits zero, and 25 encryption rounds are performed.
The second form of crypt string must consist of an "_" followed by 19 base 64 digits. The first four give the number of encryption rounds, the next four give the salt, and the next eleven give the hash. Long passphrases are folded, and the initial block is all bits zero.
 Authen::Passphrase::DESCrypt>from_rfc2307(USERPASSWORD)
 Generates a new passphrase recogniser object using the DESbased crypt() algorithm, from an RFC 2307 string. The string must consist of "{CRYPT}" (case insensitive) followed by an acceptable crypt string.
METHODS
 $ppr>fold
 Returns a truth value indicating whether passphrase folding is used.
 $ppr>initial
 Returns the initial block, as a string of eight bytes.
 $ppr>initial_base64
 Returns the initial block, as a string of eleven base 64 digits.
 $ppr>nrounds
 Returns the number of encryption rounds, as a Perl integer.
 $ppr>nrounds_base64_4
 Returns the number of encryption rounds, as a string of four base 64 digits.
 $ppr>salt
 Returns the salt, as a Perl integer.
 $ppr>salt_base64_2
 Returns the salt, as a string of two base 64 digits. "die"s if it doesn't fit into two digits.
 $ppr>salt_base64_4
 Returns the salt, as a string of four base 64 digits.
 $ppr>hash
 Returns the hash value, as a string of eight bytes.
 $ppr>hash_base64
 Returns the hash value, as a string of eleven base 64 digits.
 $ppr>match(PASSPHRASE)
 $ppr>as_crypt
 $ppr>as_rfc2307
 These methods are part of the standard Authen::Passphrase interface.
AUTHOR
Andrew Main (Zefram) <[email protected]>COPYRIGHT
Copyright (C) 2006, 2007, 2009, 2010, 2012 Andrew Main (Zefram) <[email protected]>LICENSE
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.