SYNOPSIS

bs11_config [options] [command]

DESCRIPTION

bs11_config is a small commandline program that can be used to configure the BS-11? BTS using its RS232 link.

It can perform a subset of the functions that are typically performed using the Siemens LMT (Local Maintenance Terminal) software, such as

-

querying some essential configuration values

-

creating and deleting TRX1 objects

-

download of SAFETY LOAD software

-

download of BTS software

-

creating an initial configuration (such as creating BBSIG,CCLK,PA,... objects)

-

setting the Tx output power of the RF amplifier

It is part of the OpenBSC base station controller software from Osmocom.

OPTIONS

-h,--help

Print this help text

-p,--port </dev/ttyXXX>

Specify serial port

-s,--software <file>

Specify Software file

-S,--safety <file>

Specify Safety Load file

-d,--delay <ms>

Specify delay in milliseconds

-D,--disconnect

Disconnect BTS from BSC

-w,--win-size <num>

Specify Window Size

-f,--forced

Force Software Load

SUPPORTED COMMANDS

query

Query the BS-11 about serial number and configuration

disconnect

Disconnect A-bis link (go into administrative state)

resconnect

Reconnect A-bis link (go into normal state)

restart

Restart the BTS

software

Download Software (only in administrative state)

create-trx1

Create objects for TRX1 (Danger: Your BS-11 might overheat)

delete-trx1

Delete objects for TRX1

pll-e1-locked

Set the PLL to be locked to E1 clock

pll-standalone

Set the PLL to be in standalone mode

pll-setvalue <value>

Set the PLL set value

pll-workvalue <value>

Set the PLL work value

oml-tei

Set OML E1 TS and TEI

bport0-star

Set BPORT0 line config to star

bport0-multidrop

Set BPORT0 line config to multidrop

bport1-multidrop

Set BPORT1 line config to multidrop

create-bport1

Create BPORT1 object

delete-bport1

Delete BPORT1 object

AUTHOR

This manual page was written by Ruben Undheim <[email protected]> for the Debian project (and may be used by others).