duplicity(1) Encrypted incremental backup to local or remote storage.

SYNOPSIS

For detailed descriptions for each command see chapter ACTIONS.

duplicity [full|incremental] [options] source_directory target_url

duplicity verify [options] [--compare-data] [--file-to-restore <relpath>] [--time time] source_url target_directory

duplicity collection-status [options] [--file-changed <relpath>] target_url

duplicity list-current-files [options] [--time time] target_url

duplicity [restore] [options] [--file-to-restore <relpath>] [--time time] source_url target_directory

duplicity remove-older-than <time> [options] [--force] target_url

duplicity remove-all-but-n-full <count> [options] [--force] target_url

duplicity remove-all-inc-of-but-n-full <count> [options] [--force] target_url

duplicity cleanup [options] [--force] [--extra-clean] target_url

DESCRIPTION

Duplicity incrementally backs up files and folders into tar-format volumes encrypted with GnuPG and places them to a remote (or local) storage backend. See chapter URL FORMAT for a list of all supported backends and how to address them. Because duplicity uses librsync, incremental backups are space efficient and only record the parts of files that have changed since the last backup. Currently duplicity supports deleted files, full Unix permissions, uid/gid, directories, symbolic links, fifos, etc., but not hard links.

If you are backing up the root directory /, remember to --exclude /proc, or else duplicity will probably crash on the weird stuff in there.

EXAMPLES

Here is an example of a backup, using sftp to back up /home/me to some_dir on the other.host machine:

duplicity /home/me sftp://[email protected]/some_dir

If the above is run repeatedly, the first will be a full backup, and subsequent ones will be incremental. To force a full backup, use the full action:

duplicity full /home/me sftp://[email protected]/some_dir

or enforcing a full every other time via --full-if-older-than <time> , e.g. a full every month:

duplicity --full-if-older-than 1M /home/me sftp://[email protected]/some_dir

Now suppose we accidentally delete /home/me and want to restore it the way it was at the time of last backup:

duplicity sftp://[email protected]/some_dir /home/me

Duplicity enters restore mode because the URL comes before the local directory. If we wanted to restore just the file "Mail/article" in /home/me as it was three days ago into /home/me/restored_file:

duplicity -t 3D --file-to-restore Mail/article sftp://[email protected]/some_dir /home/me/restored_file

The following command compares the latest backup with the current files:

duplicity verify sftp://[email protected]/some_dir /home/me

Finally, duplicity recognizes several include/exclude options. For instance, the following will backup the root directory, but exclude /mnt, /tmp, and /proc:

duplicity --exclude /mnt --exclude /tmp --exclude /proc / file:///usr/local/backup

Note that in this case the destination is the local directory /usr/local/backup. The following will backup only the /home and /etc directories under root:

duplicity --include /home --include /etc --exclude '**' / file:///usr/local/backup

Duplicity can also access a repository via ftp. If a user name is given, the environment variable FTP_PASSWORD is read to determine the password:

FTP_PASSWORD=mypassword duplicity /local/dir ftp://[email protected]/some_dir

ACTIONS

Duplicity knows action commands, which can be finetuned with options.
The actions for backup (full,incr) and restoration (restore) can as well be left out as duplicity detects in what mode it should switch to by the order of target URL and local folder. If the target URL comes before the local folder a restore is in order, is the local folder before target URL then this folder is about to be backed up to the target URL.
If a backup is in order and old signatures can be found duplicity automatically performs an incremental backup.

Note: The following explanations explain some but not all options that can be used in connection with that action command. Consult the OPTIONS section for more detailed informations.

full <folder> <url>
Perform a full backup. A new backup chain is started even if signatures are available for an incremental backup.

incr <folder> <url>
If this is requested an incremental backup will be performed. Duplicity will abort if no old signatures can be found.

verify [--compare-data] [--time <time>] [--file-to-restore <rel_path>] <url> <local_path>
Restore backup contents temporarily file by file and compare against the local path's contents. duplicity will exit with a non-zero error level if any files are different. On verbosity level info (4) or higher, a message for each file that has changed will be logged.
The --file-to-restore option restricts verify to that file or folder. The --time option allows to select a backup to verify against. The --compare-data option enables data comparison (see below).

collection-status [--file-changed <relpath>]<url>
Summarize the status of the backup repository by printing the chains and sets found, and the number of volumes in each.

list-current-files [--time <time>] <url>
Lists the files contained in the most current backup or backup at time. The information will be extracted from the signature files, not the archive data itself. Thus the whole archive does not have to be downloaded, but on the other hand if the archive has been deleted or corrupted, this command will not detect it.

restore [--file-to-restore <relpath>] [--time <time>] <url> <target_folder>
You can restore the full monty or selected folders/files from a specific time. Use the relative path as it is printed by list-current-files. Usually not needed as duplicity enters restore mode when it detects that the URL comes before the local folder.

remove-older-than <time> [--force] <url>
Delete all backup sets older than the given time. Old backup sets will not be deleted if backup sets newer than time depend on them. See the TIME FORMATS section for more information. Note, this action cannot be combined with backup or other actions, such as cleanup. Note also that --force will be needed to delete the files instead of just listing them.

remove-all-but-n-full <count> [--force] <url>
Delete all backups sets that are older than the count:th last full backup (in other words, keep the last count full backups and associated incremental sets). count must be larger than zero. A value of 1 means that only the single most recent backup chain will be kept. Note that --force will be needed to delete the files instead of just listing them.

remove-all-inc-of-but-n-full <count> [--force] <url>
Delete incremental sets of all backups sets that are older than the count:th last full backup (in other words, keep only old full backups and not their increments). count must be larger than zero. A value of 1 means that only the single most recent backup chain will be kept intact. Note that --force will be needed to delete the files instead of just listing them.

cleanup [--force] [--extra-clean] <url>
Delete the extraneous duplicity files on the given backend. Non-duplicity files, or files in complete data sets will not be deleted. This should only be necessary after a duplicity session fails or is aborted prematurely. Note that --force will be needed to delete the files instead of just listing them.

OPTIONS

--allow-source-mismatch
Do not abort on attempts to use the same archive dir or remote backend to back up different directories. duplicity will tell you if you need this switch.

--archive-dir path
The archive directory. NOTE: This option changed in 0.6.0. The archive directory is now necessary in order to manage persistence for current and future enhancements. As such, this option is now used only to change the location of the archive directory. The archive directory should not be deleted, or duplicity will have to recreate it from the remote repository (which may require decrypting the backup contents).

When backing up or restoring, this option specifies that the local archive directory is to be created in path. If the archive directory is not specified, the default will be to create the archive directory in ~/.cache/duplicity/.

The archive directory can be shared between backups to multiple targets, because a subdirectory of the archive dir is used for individual backups (see --name ).

The combination of archive directory and backup name must be unique in order to separate the data of different backups.

The interaction between the --archive-dir and the --name options allows for four possible combinations for the location of the archive dir:

1.
neither specified (default)
 ~/.cache/duplicity/hash-of-url
2.
--archive-dir=/arch, no --name
 /arch/hash-of-url
3.
no --archive-dir, --name=foo
 ~/.cache/duplicity/foo
4.
--archive-dir=/arch, --name=foo
 /arch/foo

--asynchronous-upload
(EXPERIMENTAL) Perform file uploads asynchronously in the background, with respect to volume creation. This means that duplicity can upload a volume while, at the same time, preparing the next volume for upload. The intended end-result is a faster backup, because the local CPU and your bandwidth can be more consistently utilized. Use of this option implies additional need for disk space in the temporary storage location; rather than needing to store only one volume at a time, enough storage space is required to store two volumes.

--cf-backend backend
Allows the explicit selection of a cloudfiles backend. Defaults to pyrax. Alternatively you might choose cloudfiles.

--compare-data
Enable data comparison of regular files on action verify. This is disabled by default for performance reasons.

--dry-run
Calculate what would be done, but do not perform any backend actions

--encrypt-key key-id
When backing up, encrypt to the given public key, instead of using symmetric (traditional) encryption. Can be specified multiple times. The key-id can be given in any of the formats supported by GnuPG; see gpg(1), section "HOW TO SPECIFY A USER ID" for details.

--encrypt-secret-keyring filename
This option can only be used with --encrypt-key, and changes the path to the secret keyring for the encrypt key to filename This keyring is not used when creating a backup. If not specified, the default secret keyring is used which is usually located at .gnupg/secring.gpg

--encrypt-sign-key key-id
Convenience parameter. Same as --encrypt-key key-id --sign-key key-id.

--exclude shell_pattern
Exclude the file or files matched by shell_pattern. If a directory is matched, then files under that directory will also be matched. See the FILE SELECTION section for more information.

--exclude-device-files
Exclude all device files. This can be useful for security/permissions reasons or if rdiff-backup is not handling device files correctly.

--exclude-filelist filename
Excludes the files listed in filename, with each line of the filelist interpreted according to the same rules as --include and --exclude. See the FILE SELECTION section for more information.

--exclude-if-present filename
Exclude directories if filename is present. Allows the user to specify folders that they do not wish to backup by adding a specified file (e.g. ".nobackup") instead of maintaining a comprehensive exclude/include list. This option needs to come before any other include or exclude options.

--exclude-older-than time
Exclude any files whose modification date is earlier than the specified time. This can be used to produce a partial backup that contains only recently changed files. See the TIME FORMATS section for more information.

--exclude-other-filesystems
Exclude files on file systems (identified by device number) other than the file system the root of the source directory is on.

--exclude-regexp regexp
Exclude files matching the given regexp. Unlike the --exclude option, this option does not match files in a directory it matches. See the FILE SELECTION section for more information.

--extra-clean
When cleaning up, be more aggressive about saving space. For example, this may delete signature files for old backup chains.

Caution: Without signature files those old backup chains are unrestorable. Do not use --extra-clean unless you know what you're doing.

See the cleanup argument for more information.

--file-changed path
This option may be given in collection-status mode, causing only path status to be collect instead of the entire contents of the backup archive. path should be given relative to the root of the directory backed up.

--file-prefix, --file-prefix-manifest, --file-prefix-archive, --file-prefix-signature
Adds a prefix to all files, manifest files, archive files, and/or signature files.

The same set of prefixes must be passed in on backup and restore.

If both global and type-specific prefixes are set, global prefix will go before type-specific prefixes.

See also A NOTE ON FILENAME PREFIXES

--file-to-restore path
This option may be given in restore mode, causing only path to be restored instead of the entire contents of the backup archive. path should be given relative to the root of the directory backed up.

--full-if-older-than time
Perform a full backup if an incremental backup is requested, but the latest full backup in the collection is older than the given time. See the TIME FORMATS section for more information.

--force
Proceed even if data loss might result. Duplicity will let the user know when this option is required.

--ftp-passive
Use passive (PASV) data connections. The default is to use passive, but to fallback to regular if the passive connection fails or times out.

--ftp-regular
Use regular (PORT) data connections.

--gio
Use the GIO backend and interpret any URLs as GIO would.

--hidden-encrypt-key key-id
Same as --encrypt-key, but it hides user's key id from encrypted file. It uses the gpg's --hidden-recipient command to obfuscate the owner of the backup. On restore, gpg will automatically try all available secret keys in order to decrypt the backup. See gpg(1) for more details.

--ignore-errors
Try to ignore certain errors if they happen. This option is only intended to allow the restoration of a backup in the face of certain problems that would otherwise cause the backup to fail. It is not ever recommended to use this option unless you have a situation where you are trying to restore from backup and it is failing because of an issue which you want duplicity to ignore. Even then, depending on the issue, this option may not have an effect.

Please note that while ignored errors will be logged, there will be no summary at the end of the operation to tell you what was ignored, if anything. If this is used for emergency restoration of data, it is recommended that you run the backup in such a way that you can revisit the backup log (look for lines containing the string IGNORED_ERROR).

If you ever have to use this option for reasons that are not understood or understood but not your own responsibility, please contact duplicity maintainers. The need to use this option under production circumstances would normally be considered a bug.

--imap-full-address email_address
The full email address of the user name when logging into an imap server. If not supplied just the user name part of the email address is used.

--imap-mailbox option
Allows you to specify a different mailbox. The default is "INBOX". Other languages may require a different mailbox than the default.

--gpg-binary file_path
Allows you to force duplicity to use file_path as gpg command line binary. Can be an absolute or relative file path or a file name. Default value is 'gpg'. The binary will be localized via the PATH environment variable.

--gpg-options options
Allows you to pass options to gpg encryption. The options list should be of the form "--opt1 --opt2=parm" where the string is quoted and the only spaces allowed are between options.

--include shell_pattern
Similar to --exclude but include matched files instead. Unlike --exclude, this option will also match parent directories of matched files (although not necessarily their contents). See the FILE SELECTION section for more information.

--include-filelist filename
Like --exclude-filelist, but include the listed files instead. See the FILE SELECTION section for more information.

--include-regexp regexp
Include files matching the regular expression regexp. Only files explicitly matched by regexp will be included by this option. See the FILE SELECTION section for more information.

--log-fd number
Write specially-formatted versions of output messages to the specified file descriptor. The format used is designed to be easily consumable by other programs.

--log-file filename
Write specially-formatted versions of output messages to the specified file. The format used is designed to be easily consumable by other programs.

--max-blocksize number
determines the number of the blocks examined for changes during the diff process. For files < 1MB the blocksize is a constant of 512. For files over 1MB the size is given by:

file_blocksize = int((file_len / (2000 * 512)) * 512)
return min(file_blocksize, globals.max_blocksize)

where globals.max_blocksize defaults to 2048. If you specify a larger max_blocksize, your difftar files will be larger, but your sigtar files will be smaller. If you specify a smaller max_blocksize, the reverse occurs. The --max-blocksize option should be in multiples of 512.

--name symbolicname
Set the symbolic name of the backup being operated on. The intent is to use a separate name for each logically distinct backup. For example, someone may use "home_daily_s3" for the daily backup of a home directory to Amazon S3. The structure of the name is up to the user, it is only important that the names be distinct. The symbolic name is currently only used to affect the expansion of --archive-dir , but may be used for additional features in the future. Users running more than one distinct backup are encouraged to use this option.

If not specified, the default value is a hash of the backend URL.

--no-compression
Do not use GZip to compress files on remote system.

--no-encryption
Do not use GnuPG to encrypt files on remote system.

--no-print-statistics
By default duplicity will print statistics about the current session after a successful backup. This switch disables that behavior.

--null-separator
Use nulls (\0) instead of newlines (\n) as line separators, which may help when dealing with filenames containing newlines. This affects the expected format of the files specified by the --{include|exclude}-filelist switches as well as the format of the directory statistics file.

--numeric-owner
On restore always use the numeric uid/gid from the archive and not the archived user/group names, which is the default behaviour. Recommended for restoring from live cds which might have the users with identical names but different uids/gids.

--num-retries number
Number of retries to make on errors before giving up.

--old-filenames
Use the old filename format (incompatible with Windows/Samba) rather than the new filename format.

--par2-options options
Verbatim options to pass to par2.

--par2-redundancy percent
Adjust the level of redundancy in percent for Par2 recovery files (default 10%).

--progress
When selected, duplicity will output the current upload progress and estimated upload time. To annotate changes, it will perform a first dry-run before a full or incremental, and then runs the real operation estimating the real upload progress.

--progress-rate number
Sets the update rate at which duplicity will output the upload progress messages (requires --progress option). Default is to prompt the status each 3 seconds.

--rename <original path> <new path>
Treats the path orig in the backup as if it were the path new. Can be passed multiple times. An example:

duplicity restore --rename Documents/metal Music/metal sftp://[email protected]/some_dir /home/me

--rsync-options options
Allows you to pass options to the rsync backend. The options list should be of the form "opt1=parm1 opt2=parm2" where the option string is quoted and the only spaces allowed are between options. The option string will be passed verbatim to rsync, after any internally generated option designating the remote port to use. Here is a possibly useful example:

duplicity --rsync-options="--partial-dir=.rsync-partial" /home/me rsync://[email protected]/some_dir

--s3-european-buckets
When using the Amazon S3 backend, create buckets in Europe instead of the default (requires --s3-use-new-style ). Also see the EUROPEAN S3 BUCKETS section.

--s3-unencrypted-connection
Don't use SSL for connections to S3.

This may be much faster, at some cost to confidentiality.

With this option, anyone who can observe traffic between your computer and S3 will be able to tell: that you are using Duplicity, the name of the bucket, your AWS Access Key ID, the increment dates and the amount of data in each increment.

This option affects only the connection, not the GPG encryption of the backup increment files. Unless that is disabled, an observer will not be able to see the file names or contents.

--s3-use-new-style
When operating on Amazon S3 buckets, use new-style subdomain bucket addressing. This is now the preferred method to access Amazon S3, but is not backwards compatible if your bucket name contains upper-case characters or other characters that are not valid in a hostname.

--s3-use-rrs
Store volumes using Reduced Redundancy Storage when uploading to Amazon S3. This will lower the cost of storage but also lower the durability of stored volumes to 99.99% instead the 99.999999999% durability offered by Standard Storage on S3.

--s3-use-ia
Store volumes using Standard - Infrequent Access when uploading to Amazon S3. This storage class has a lower storage cost but a higher per-request cost, and the storage cost is calculated against a 30-day storage minimum. According to Amazon, this storage is ideal for long-term file storage, backups, and disaster recovery.

--s3-use-multiprocessing
Allow multipart volumne uploads to S3 through multiprocessing. This option requires Python 2.6 and can be used to make uploads to S3 more efficient. If enabled, files duplicity uploads to S3 will be split into chunks and uploaded in parallel. Useful if you want to saturate your bandwidth or if large files are failing during upload.

--s3-use-server-side-encryption
Allow use of server side encryption in S3

--s3-multipart-chunk-size
Chunk size (in MB) used for S3 multipart uploads. Make this smaller than --volsize to maximize the use of your bandwidth. For example, a chunk size of 10MB with a volsize of 30MB will result in 3 chunks per volume upload.

--s3-multipart-max-procs
Specify the maximum number of processes to spawn when performing a multipart upload to S3. By default, this will choose the number of processors detected on your system (e.g. 4 for a 4-core system). You can adjust this number as required to ensure you don't overload your system while maximizing the use of your bandwidth.

--s3-multipart-max-timeout
You can control the maximum time (in seconds) a multipart upload can spend on uploading a single chunk to S3. This may be useful if you find your system hanging on multipart uploads or if you'd like to control the time variance when uploading to S3 to ensure you kill connections to slow S3 endpoints.

--scp-command command
(only ssh pexpect backend with --use-scp enabled) The command will be used instead of "scp" to send or receive files. To list and delete existing files, the sftp command is used.
See also A NOTE ON SSH BACKENDS section SSH pexpect backend.

--sftp-command command
(only ssh pexpect backend) The command will be used instead of "sftp".
See also A NOTE ON SSH BACKENDS section SSH pexpect backend.

--short-filenames
If this option is specified, the names of the files duplicity writes will be shorter (about 30 chars) but less understandable. This may be useful when backing up to MacOS or another OS or FS that doesn't support long filenames.

--sign-key key-id
This option can be used when backing up, restoring or verifying. When backing up, all backup files will be signed with keyid key. When restoring, duplicity will signal an error if any remote file is not signed with the given key-id. The key-id can be given in any of the formats supported by GnuPG; see gpg(1), section "HOW TO SPECIFY A USER ID" for details. Should be specified only once because currently only one signing key is supported. Last entry overrides all other entries.
See also A NOTE ON SYMMETRIC ENCRYPTION AND SIGNING

--ssh-askpass
Tells the ssh backend to prompt the user for the remote system password, if it was not defined in target url and no FTP_PASSWORD env var is set. This password is also used for passphrase-protected ssh keys.

--ssh-options options
Allows you to pass options to the ssh backend. Can be specified multiple times or as a space separated options list. The options list should be of the form "-oOpt1='parm1' -oOpt2='parm2'" where the option string is quoted and the only spaces allowed are between options. The option string will be passed verbatim to both scp and sftp, whose command line syntax differs slightly hence the options should therefore be given in the long option format described in ssh_config(5).

example of a list:

duplicity --ssh-options="-oProtocol=2 -oIdentityFile='/my/backup/id'" /home/me scp://user@host/some_dir

example with multiple parameters:

duplicity --ssh-options="-oProtocol=2" --ssh-options="-oIdentityFile='/my/backup/id'" /home/me scp://user@host/some_dir

NOTE: The ssh paramiko backend currently supports only the -i or -oIdentityFile setting. If needed provide more host specific options via ssh_config file.

--ssl-cacert-file file
(only webdav & lftp backend) Provide a cacert file for ssl certificate verification.
See also A NOTE ON SSL CERTIFICATE VERIFICATION.

--ssl-cacert-path path/to/certs/
(only webdav backend and python 2.7.9+ OR lftp+webdavs and a recent lftp) Provide a path to a folder containing cacert files for ssl certificate verification.
See also A NOTE ON SSL CERTIFICATE VERIFICATION.

--ssl-no-check-certificate
(only webdav & lftp backend) Disable ssl certificate verification.
See also A NOTE ON SSL CERTIFICATE VERIFICATION.

--tempdir directory
Use this existing directory for duplicity temporary files instead of the system default, which is usually the /tmp directory. This option supersedes any environment variable.
See also ENVIRONMENT VARIABLES.

-ttime, --time time, --restore-time time
Specify the time from which to restore or list files.

--time-separator char
Use char as the time separator in filenames instead of colon (":").

--timeout seconds
Use seconds as the socket timeout value if duplicity begins to timeout during network operations. The default is 30 seconds.

--use-agent
If this option is specified, then --use-agent is passed to the GnuPG encryption process and it will try to connect to gpg-agent before it asks for a passphrase for --encrypt-key or --sign-key if needed.
Note: GnuPG 2 and newer ignore this option and will always use a running gpg-agent if no passphrase was delivered.

--verbosity level, -vlevel
Specify output verbosity level (log level). Named levels and corresponding values are 0 Error, 2 Warning, 4 Notice (default), 8 Info, 9 Debug (noisiest).
level may also be
a character: e, w, n, i, d
a word: error, warning, notice, info, debug

The options -v4, -vn and -vnotice are functionally equivalent, as are the mixed/upper-case versions -vN, -vNotice and -vNOTICE.

--version
Print duplicity's version and quit.

--volsize number
Change the volume size to number Mb. Default is 25Mb.

ENVIRONMENT VARIABLES

TMPDIR, TEMP, TMP
In decreasing order of importance, specifies the directory to use for temporary files (inherited from Python's tempfile module). Eventually the option --tempdir supercedes any of these.
FTP_PASSWORD
Supported by most backends which are password capable. More secure than setting it in the backend url (which might be readable in the operating systems process listing to other users on the same machine).
PASSPHRASE
This passphrase is passed to GnuPG. If this is not set, the user will be prompted for the passphrase.
SIGN_PASSPHRASE
The passphrase to be used for --sign-key. If ommitted and sign key is also one of the keys to encrypt against PASSPHRASE will be reused instead. Otherwise, if passphrase is needed but not set the user will be prompted for it.

URL FORMAT

Duplicity uses the URL format (as standard as possible) to define data locations. The generic format for a URL is:

scheme://[user[:password]@]host[:port]/[/]path

It is not recommended to expose the password on the command line since it could be revealed to anyone with permissions to do process listings, it is permitted however. Consider setting the environment variable FTP_PASSWORD instead, which is used by most, if not all backends, regardless of it's name.

In protocols that support it, the path may be preceded by a single slash, '/path', to represent a relative path to the target home directory, or preceded by a double slash, '//path', to represent an absolute filesystem path.

Note:

Scheme (protocol) access may be provided by more than one backend. In case the default backend is buggy or simply not working in a specific case it might be worth trying an alternative implementation. Alternative backends can be selected by prefixing the scheme with the name of the alternative backend e.g. ncftp+ftp:// and are mentioned below the scheme's syntax summary.

Formats of each of the URL schemes follow:

Azure

azure://container-name

See also A NOTE ON AZURE ACCESS

B2

b2://account_id[:application_key]@bucket_name/[folder/]

Cloud Files (Rackspace)

cf+http://container_name

See also A NOTE ON CLOUD FILES ACCESS

Copy cloud storage

copy://user[:password]@copy.com/some_dir

Dropbox

dpbx:///some_dir

Make sure to read A NOTE ON DROPBOX ACCESS first!

Local file path

file://[relative|/absolute]/local/path

FISH (Files transferred over Shell protocol) over ssh

fish://user[:pwd]@other.host[:port]/[relative|/absolute]_path

FTP

ftp[s]://user[:password]@other.host[:port]/some_dir

NOTE: use lftp+, ncftp+ prefixes to enforce a specific backend, default is lftp+ftp://...

Google Docs

gdocs://user[:password]@other.host/some_dir

NOTE: use pydrive+, gdata+ prefixes to enforce a specific backend, default is pydrive+gdocs://...

Google Cloud Storage

gs://bucket[/prefix]

HSI

hsi://user[:password]@other.host/some_dir

hubiC

cf+hubic://container_name

See also A NOTE ON HUBIC

IMAP email storage

imap[s]://user[:password]@host.com[/from_address_prefix]

See also A NOTE ON IMAP

Mega cloud storage

mega://user[:password]@mega.co.nz/some_dir

OneDrive Backend

onedrive://some_dir

Par2 Wrapper Backend

par2+scheme://[user[:password]@]host[:port]/[/]path

See also A NOTE ON PAR2 WRAPPER BACKEND

Rsync via daemon

rsync://user[:password]@host.com[:port]::[/]module/some_dir

Rsync over ssh (only key auth)

rsync://[email protected][:port]/[relative|/absolute]_path

S3 storage (Amazon)

s3://host[:port]/bucket_name[/prefix]
s3+http://bucket_name[/prefix]

See also A NOTE ON EUROPEAN S3 BUCKETS

SCP/SFTP access

scp://.. or
sftp://user[:pwd]@other.host[:port]/[relative|/absolute]_path

defaults are paramiko+scp:// and paramiko+sftp://
alternatively try pexpect+scp://, pexpect+sftp://, lftp+sftp://
See also --ssh-askpass, --ssh-options and A NOTE ON SSH BACKENDS.

Swift (Openstack)

swift://container_name

See also A NOTE ON SWIFT (OPENSTACK OBJECT STORAGE) ACCESS

Tahoe-LAFS

tahoe://alias/directory

WebDAV

webdav[s]://user[:password]@other.host[:port]/some_dir

alternatively try lftp+webdav[s]://

pydrive

pydrive://<service account' email address>@developer.gserviceaccount.com/some_dir

See also A NOTE ON PYDRIVE BACKEND below.

multi

multi:///path/to/config.json

See also A NOTE ON MULTI BACKEND below.

MediaFire

mf://user[:password]@mediafire.com/some_dir

See also A NOTE ON MEDIAFIRE BACKEND below.

TIME FORMATS

duplicity uses time strings in two places. Firstly, many of the files duplicity creates will have the time in their filenames in the w3 datetime format as described in a w3 note at http://www.w3.org/TR/NOTE-datetime. Basically they look like "2001-07-15T04:09:38-07:00", which means what it looks like. The "-07:00" section means the time zone is 7 hours behind UTC.

Secondly, the -t, --time, and --restore-time options take a time string, which can be given in any of several formats:

1.
the string "now" (refers to the current time)
2.
a sequences of digits, like "123456890" (indicating the time in seconds after the epoch)
3.
A string like "2002-01-25T07:00:00+02:00" in datetime format
4.
An interval, which is a number followed by one of the characters s, m, h, D, W, M, or Y (indicating seconds, minutes, hours, days, weeks, months, or years respectively), or a series of such pairs. In this case the string refers to the time that preceded the current time by the length of the interval. For instance, "1h78m" indicates the time that was one hour and 78 minutes ago. The calendar here is unsophisticated: a month is always 30 days, a year is always 365 days, and a day is always 86400 seconds.
5.
A date format of the form YYYY/MM/DD, YYYY-MM-DD, MM/DD/YYYY, or MM-DD-YYYY, which indicates midnight on the day in question, relative to the current time zone settings. For instance, "2002/3/5", "03-05-2002", and "2002-3-05" all mean March 5th, 2002.

FILE SELECTION

When duplicity is run, it searches through the given source directory and backs up all the files specified by the file selection system. The file selection system comprises a number of file selection conditions, which are set using one of the following command line options:
--exclude
--exclude-device-files
--exclude-filelist
--exclude-regexp
--include
--include-filelist
--include-regexp
Each file selection condition either matches or doesn't match a given file. A given file is excluded by the file selection system exactly when the first matching file selection condition specifies that the file be excluded; otherwise the file is included.

For instance,

duplicity --include /usr --exclude /usr /usr scp://user@host/backup

is exactly the same as

duplicity /usr scp://user@host/backup

because the include and exclude directives match exactly the same files, and the --include comes first, giving it precedence. Similarly,

duplicity --include /usr/local/bin --exclude /usr/local /usr scp://user@host/backup

would backup the /usr/local/bin directory (and its contents), but not /usr/local/doc.

The include, exclude, include-filelist, and exclude-filelist options accept some extended shell globbing patterns. These patterns can contain *, **, ?, and [...] (character ranges). As in a normal shell, * can be expanded to any string of characters not containing "/", ? expands to any character except "/", and [...] expands to a single character of those characters specified (ranges are acceptable). The new special pattern, **, expands to any string of characters whether or not it contains "/". Furthermore, if the pattern starts with "ignorecase:" (case insensitive), then this prefix will be removed and any character in the string can be replaced with an upper- or lowercase version of itself.

Remember that you may need to quote these characters when typing them into a shell, so the shell does not interpret the globbing patterns before duplicity sees them.

The --exclude pattern option matches a file if:

1. pattern can be expanded into the file's filename, or
2. the file is inside a directory matched by the option.

Conversely, the --include pattern matches a file if:

1. pattern can be expanded into the file's filename, or
2. the file is inside a directory matched by the option, or
3. the file is a directory which contains a file matched by the option.

For example,

--exclude /usr/local

matches e.g. /usr/local, /usr/local/lib, and /usr/local/lib/netscape. It is the same as --exclude /usr/local --exclude '/usr/local/**'.

On the other hand

--include /usr/local

specifies that /usr, /usr/local, /usr/local/lib, and /usr/local/lib/netscape (but not /usr/doc) all be backed up. Thus you don't have to worry about including parent directories to make sure that included subdirectories have somewhere to go.

Finally,

--include ignorecase:'/usr/[a-z0-9]foo/*/**.py'

would match a file like /usR/5fOO/hello/there/world.py. If it did match anything, it would also match /usr. If there is no existing file that the given pattern can be expanded into, the option will not match /usr alone.

The --include-filelist, and --exclude-filelist, options also introduce file selection conditions. They direct duplicity to read in a file, each line of which is a file specification, and to include or exclude the matching files. Lines are separated by newlines or nulls, depending on whether the --null-separator switch was given. Each line in the filelist will be interpreted as a globbing pattern the way --include and --exclude options are interpreted, except that lines starting with "+ " are interpreted as include directives, even if found in a filelist referenced by --exclude-filelist. Similarly, lines starting with "- " exclude files even if they are found within an include filelist.

For example, if file "list.txt" contains the lines:

/usr/local
- /usr/local/doc
/usr/local/bin
+ /var
- /var

then --include-filelist list.txt would include /usr, /usr/local, and /usr/local/bin. It would exclude /usr/local/doc, /usr/local/doc/python, etc. It would also include /usr/local/man, as this is included within /user/local. Finally, it is undefined what happens with /var. A single file list should not contain conflicting file specifications.

Each line in the filelist will also be interpreted as a globbing pattern the way --include and --exclude options are interpreted. For instance, if the file "list.txt" contains the lines:

dir/foo
+ dir/bar
- **

Then --include-filelist list.txt would be exactly the same as specifying --include dir/foo --include dir/bar --exclude ** on the command line.

Finally, the --include-regexp and --exclude-regexp options allow files to be included and excluded if their filenames match a python regular expression. Regular expression syntax is too complicated to explain here, but is covered in Python's library reference. Unlike the --include and --exclude options, the regular expression options don't match files containing or contained in matched files. So for instance

--include '[0-9]{7}(?!foo)'

matches any files whose full pathnames contain 7 consecutive digits which aren't followed by 'foo'. However, it wouldn't match /home even if /home/ben/1234567 existed.

A NOTE ON AZURE ACCESS

The Azure backend requires the Microsoft Azure Storage SDK for Python to be installed on the system. See REQUIREMENTS above.

It uses two environment variables for authentification: AZURE_ACCOUNT_NAME (required), AZURE_ACCOUNT_KEY (required)

A container name must be a valid DNS name, conforming to the following naming rules:

1.
Container names must start with a letter or number, and can contain only letters, numbers, and the dash (-) character.
2.
Every dash (-) character must be immediately preceded and followed by a letter or number; consecutive dashes are not permitted in container names.
3.
All letters in a container name must be lowercase.
4.
Container names must be from 3 through 63 characters long.

A NOTE ON CLOUD FILES ACCESS

Pyrax is Rackspace's next-generation Cloud management API, including Cloud Files access. The cfpyrax backend requires the pyrax library to be installed on the system. See REQUIREMENTS above.

Cloudfiles is Rackspace's now deprecated implementation of OpenStack Object Storage protocol. Users wishing to use Duplicity with Rackspace Cloud Files should migrate to the new Pyrax plugin to ensure support.

The backend requires python-cloudfiles to be installed on the system. See REQUIREMENTS above.

It uses three environment variables for authentification: CLOUDFILES_USERNAME (required), CLOUDFILES_APIKEY (required), CLOUDFILES_AUTHURL (optional)

If CLOUDFILES_AUTHURL is unspecified it will default to the value provided by python-cloudfiles, which points to rackspace, hence this value must be set in order to use other cloud files providers.

A NOTE ON DROPBOX ACCESS

1.
First of all Dropbox backend requires valid authentication token. It should be passed via DPBX_ACCESS_TOKEN environment variable.
To obtain it please create 'Dropbox API' application at: https://www.dropbox.com/developers/apps/create
Then visit app settings and just use 'Generated access token' under OAuth2 section.
Alternatively you can let duplicity generate access token itself. In such case temporary export DPBX_APP_KEY , DPBX_APP_SECRET using values from app settings page and run duplicity interactively.
It will print the URL that you need to open in the browser to obtain OAuth2 token for the application. Just follow on-screen instructions and then put generated token to DPBX_ACCESS_TOKEN variable. Once done, feel free to unset DPBX_APP_KEY and DPBX_APP_SECRET

2.
"some_dir" must already exist in the Dropbox folder. Depending on access token kind it may be:
Full Dropbox: path is absolute and starts from 'Dropbox' root folder.
App Folder: path is related to application folder. Dropbox client will show it in ~/Dropbox/Apps/<app-name>

3.
When using Dropbox for storage, be aware that all files, including the ones in the Apps folder, will be synced to all connected computers. You may prefer to use a separate Dropbox account specially for the backups, and not connect any computers to that account. Alternatively you can configure selective sync on all computers to avoid syncing of backup files

A NOTE ON EUROPEAN S3 BUCKETS

Amazon S3 provides the ability to choose the location of a bucket upon its creation. The purpose is to enable the user to choose a location which is better located network topologically relative to the user, because it may allow for faster data transfers.

duplicity will create a new bucket the first time a bucket access is attempted. At this point, the bucket will be created in Europe if --s3-european-buckets was given. For reasons having to do with how the Amazon S3 service works, this also requires the use of the --s3-use-new-style option. This option turns on subdomain based bucket addressing in S3. The details are beyond the scope of this man page, but it is important to know that your bucket must not contain upper case letters or any other characters that are not valid parts of a hostname. Consequently, for reasons of backwards compatibility, use of subdomain based bucket addressing is not enabled by default.

Note that you will need to use --s3-use-new-style for all operations on European buckets; not just upon initial creation.

You only need to use --s3-european-buckets upon initial creation, but you may may use it at all times for consistency.

Further note that when creating a new European bucket, it can take a while before the bucket is fully accessible. At the time of this writing it is unclear to what extent this is an expected feature of Amazon S3, but in practice you may experience timeouts, socket errors or HTTP errors when trying to upload files to your newly created bucket. Give it a few minutes and the bucket should function normally.

A NOTE ON FILENAME PREFIXES

Filename prefixes can be used in conjunction with S3 lifecycle rules to transition archive files to Glacier, while keeping metadata (signature and manifest files) on S3.

Duplicity does not require access to archive files except when restoring from backup.

A NOTE ON GOOGLE CLOUD STORAGE

Support for Google Cloud Storage relies on its Interoperable Access, which must be enabled for your account. Once enabled, you can generate Interoperable Storage Access Keys and pass them to duplicity via the GS_ACCESS_KEY_ID and GS_SECRET_ACCESS_KEY environment variables. Alternatively, you can run gsutil config -a to have the Google Cloud Storage utility populate the ~/.boto configuration file.

Enable Interoperable Access: https://code.google.com/apis/console#:storage
Create Access Keys: https://code.google.com/apis/console#:storage:legacy

A NOTE ON HUBIC

The hubic backend requires the pyrax library to be installed on the system. See REQUIREMENTS above. You will need to set your credentials for hubiC in a file called ~/.hubic_credentials, following this pattern:

[hubic]
email = your_email
password = your_password
client_id = api_client_id
client_secret = api_secret_key
redirect_uri = http://localhost/

A NOTE ON IMAP

An IMAP account can be used as a target for the upload. The userid may be specified and the password will be requested.

The from_address_prefix may be specified (and probably should be). The text will be used as the "From" address in the IMAP server. Then on a restore (or list) command the from_address_prefix will distinguish between different backups.

A NOTE ON MULTI BACKEND

The multi backend allows duplicity to combine the storage available in more than one backend store (e.g., you can store across a google drive account and a onedrive account to get effectively the combined storage available in both). The URL path specifies a JSON formated config file containing a list of the backends it will use. The URL may also specify "query" parameters to configure overall behavior. Each element of the list must have a "url" element, and may also contain an optional "description" and an optional "env" list of environment variables used to configure that backend.

Query Parameters

Query parameters come after the file URL in standard HTTP format for example:

multi:///path/to/config.json?mode=mirror&onfail=abort multi:///path/to/config.json?mode=stripe&onfail=continue multi:///path/to/config.json?onfail=abort&mode=stripe multi:///path/to/config.json?onfail=abort
Order does not matter, however unrecognized parameters are considered an error.
mode=stripe
This mode (the default) performs round-robin access to the list of backends. In this mode, all backends must be reliable as a loss of one means a loss of one of the archive files.
mode=mirror
This mode accesses backends as a RAID1-store, storing every file in every backend and reading files from the first-successful backend. A loss of any backend should result in no failure. Note that backends added later will only get new files and may require a manual sync with one of the other operating ones.
onfail=continue
This setting (the default) continues all write operations in as best-effort. Any failure results in the next backend tried. Failure is reported only when all backends fail a given operation with the error result from the last failure.
onfail=abort
This setting considers any backend write failure as a terminating condition and reports the error. Data reading and listing operations are independent of this and will try with the next backend on failure.

JSON File Example

[ { "description": "a comment about the backend" "url": "abackend://[email protected]/backup", "env": [ { "name" : "MYENV", "value" : "xyz" }, { "name" : "FOO", "value" : "bar" } ] }, { "url": "file:///path/to/dir" } ]

A NOTE ON PAR2 WRAPPER BACKEND

Par2 Wrapper Backend can be used in combination with all other backends to create recovery files. Just add par2+ before a regular scheme (e.g. par2+ftp://user@host/dir or par2+s3+http://bucket_name ). This will create par2 recovery files for each archive and upload them all to the wrapped backend.

Before restoring, archives will be verified. Corrupt archives will be repaired on the fly if there are enough recovery blocks available.

Use --par2-redundancy percent to adjust the size (and redundancy) of recovery files in percent.

A NOTE ON PYDRIVE BACKEND

The pydrive backend requires Python PyDrive package to be installed on the system. See REQUIREMENTS above.

There are two ways to use PyDrive: with a regular account or with a "service account". With a service account, a separate account is created, that is only accessible with Google APIs and not a web login. With a regular account, you can store backups in your normal Google Drive.

To use a service account, go to the Google developers console at https://console.developers.google.com. Create a project, and make sure Drive API is enabled for the project. Under "APIs and auth", click Create New Client ID, then select Service Account with P12 key.

Download the .p12 key file of the account and convert it to the .pem format:
openssl pkcs12 -in XXX.p12 -nodes -nocerts > pydriveprivatekey.pem

The content of .pem file should be passed to GOOGLE_DRIVE_ACCOUNT_KEY environment variable for authentification.

The email address of the account will be used as part of URL. See URL FORMAT above.

The alternative is to use a regular account. To do this, start as above, but when creating a new Client ID, select "Installed application" of type "Other". Create a file with the following content, and pass its filename in the GOOGLE_DRIVE_SETTINGS environment variable:

client_config_backend: settings client_config: client_id: <Client ID from developers' console> client_secret: <Client secret from developers' console> save_credentials: True save_credentials_backend: file save_credentials_file: <filename to cache credentials> get_refresh_token: True

In this scenario, the username and host parts of the URL play no role; only the path matters. During the first run, you will be prompted to visit an URL in your browser to grant access to your drive. Once granted, you will receive a verification code to paste back into Duplicity. The credentials are then cached in the file references above for future use.

A NOTE ON SSH BACKENDS

The ssh backends support sftp and scp/ssh transport protocols. This is a known user-confusing issue as these are fundamentally different. If you plan to access your backend via one of those please inform yourself about the requirements for a server to support sftp or scp/ssh access. To make it even more confusing the user can choose between several ssh backends via a scheme prefix: paramiko+ (default), pexpect+, lftp+... .
paramiko & pexpect support --use-scp, --ssh-askpass and --ssh-options. Only the pexpect backend allows to define --scp-command and --sftp-command.

SSH paramiko backend (default) is a complete reimplementation of ssh protocols natively in python. Advantages are speed and maintainability. Minor disadvantage is that extra packages are needed as listed in REQUIREMENTS above. In sftp (default) mode all operations are done via the according sftp commands. In scp mode ( --use-scp ) though scp access is used for put/get operations but listing is done via ssh remote shell.

SSH pexpect backend is the legacy ssh backend using the command line ssh binaries via pexpect. Older versions used scp for get and put operations and sftp for list and delete operations. The current version uses sftp for all four supported operations, unless the --use-scp option is used to revert to old behavior.

SSH lftp backend is simply there because lftp can interact with the ssh cmd line binaries. It is meant as a last resort in case the above options fail for some reason.

Why use sftp instead of scp? The change to sftp was made in order to allow the remote system to chroot the backup, thus providing better security and because it does not suffer from shell quoting issues like scp. Scp also does not support any kind of file listing, so sftp or ssh access will always be needed in addition for this backend mode to work properly. Sftp does not have these limitations but needs an sftp service running on the backend server, which is sometimes not an option.

A NOTE ON SSL CERTIFICATE VERIFICATION

Certificate verification as implemented right now [02.2016] only in the webdav and lftp backends. older pythons 2.7.8- and older lftp binaries need a file based database of certification authority certificates (cacert file).
Newer python 2.7.9+ and recent lftp versions however support the system default certificates (usually in /etc/ssl/certs) and also giving an alternative ca cert folder via --ssl-cacert-path.

The cacert file has to be a PEM formatted text file as currently provided by the CURL project. See

http://curl.haxx.se/docs/caextract.html

After creating/retrieving a valid cacert file you should copy it to either

~/.duplicity/cacert.pem
~/duplicity_cacert.pem
/etc/duplicity/cacert.pem

Duplicity searches it there in the same order and will fail if it can't find it. You can however specify the option --ssl-cacert-file <file> to point duplicity to a copy in a different location.

Finally there is the --ssl-no-check-certificate option to disable certificate verification alltogether, in case some ssl library is missing or verification is not wanted. Use it with care, as even with self signed servers manually providing the private ca certificate is definitely the safer option.

A NOTE ON SWIFT (OPENSTACK OBJECT STORAGE) ACCESS

Swift is the OpenStack Object Storage service.
The backend requires python-switclient to be installed on the system. python-keystoneclient is also needed to use OpenStack's Keystone Identity service. See REQUIREMENTS above.

It uses four environment variables for authentification: SWIFT_USERNAME (required), SWIFT_PASSWORD (required), SWIFT_AUTHURL (required), SWIFT_TENANTNAME (optional, the tenant can be included in the username)

If the user was previously authenticated, the following environment variables can be used instead: SWIFT_PREAUTHURL (required), SWIFT_PREAUTHTOKEN (required)

If SWIFT_AUTHVERSION is unspecified, it will default to version 1.

A NOTE ON MEDIAFIRE BACKEND

This backend requires mediafire python library to be installed on the system. See REQUIREMENTS.

Use URL escaping for username (and password, if provided via command line):

mf://duplicity%[email protected]/some_folder

The destination folder will be created for you if it does not exist.

A NOTE ON SYMMETRIC ENCRYPTION AND SIGNING

Signing and symmetrically encrypt at the same time with the gpg binary on the command line, as used within duplicity, is a specifically challenging issue. Tests showed that the following combinations proved working.

1. Setup gpg-agent properly. Use the option --use-agent and enter both passphrases (symmetric and sign key) in the gpg-agent's dialog.

2. Use a PASSPHRASE for symmetric encryption of your choice but the signing key has an empty passphrase.

3. The used PASSPHRASE for symmetric encryption and the passphrase of the signing key are identical.

KNOWN ISSUES / BUGS

Hard links currently unsupported (they will be treated as non-linked regular files).

Bad signatures will be treated as empty instead of logging appropriate error message.

OPERATION AND DATA FORMATS

This section describes duplicity's basic operation and the format of its data files. It should not necessary to read this section to use duplicity.

The files used by duplicity to store backup data are tarfiles in GNU tar format. They can be produced independently by rdiffdir(1). For incremental backups, new files are saved normally in the tarfile. But when a file changes, instead of storing a complete copy of the file, only a diff is stored, as generated by rdiff(1). If a file is deleted, a 0 length file is stored in the tar. It is possible to restore a duplicity archive "manually" by using tar and then cp, rdiff, and rm as necessary. These duplicity archives have the extension difftar.

Both full and incremental backup sets have the same format. In effect, a full backup set is an incremental one generated from an empty signature (see below). The files in full backup sets will start with duplicity-full while the incremental sets start with duplicity-inc. When restoring, duplicity applies patches in order, so deleting, for instance, a full backup set may make related incremental backup sets unusable.

In order to determine which files have been deleted, and to calculate diffs for changed files, duplicity needs to process information about previous sessions. It stores this information in the form of tarfiles where each entry's data contains the signature (as produced by rdiff) of the file instead of the file's contents. These signature sets have the extension sigtar.

Signature files are not required to restore a backup set, but without an up-to-date signature, duplicity cannot append an incremental backup to an existing archive.

To save bandwidth, duplicity generates full signature sets and incremental signature sets. A full signature set is generated for each full backup, and an incremental one for each incremental backup. These start with duplicity-full-signatures and duplicity-new-signatures respectively. These signatures will be stored both locally and remotely. The remote signatures will be encrypted if encryption is enabled. The local signatures will not be encrypted and stored in the archive dir (see --archive-dir ).

REQUIREMENTS

Duplicity requires a POSIX-like operating system with a python interpreter version 2.6+ installed. It is best used under GNU/Linux.

Some backends also require additional components (probably available as packages for your specific platform):

azure backend (Azure Blob Storage Service)
Microsoft Azure Storage SDK for Python - https://pypi.python.org/pypi/azure-storage/
boto backend (S3 Amazon Web Services, Google Cloud Storage)
boto version 2.0+ - http://github.com/boto/boto
cfpyrax backend (Rackspace Cloud) and hubic backend (hubic.com)
Rackspace CloudFiles Pyrax API - http://docs.rackspace.com/sdks/guide/content/python.html
dpbx backend (Dropbox)
Dropbox Python SDK - https://www.dropbox.com/developers/reference/sdk
copy backend (Copy.com)
python-urllib3 - https://github.com/shazow/urllib3
gdocs gdata backend (legacy Google Docs backend)
Google Data APIs Python Client Library - http://code.google.com/p/gdata-python-client/
gdocs pydrive backend(default)
see pydrive backend
gio backend (Gnome VFS API)
PyGObject - http://live.gnome.org/PyGObject
D-Bus (dbus)- http://www.freedesktop.org/wiki/Software/dbus
lftp backend (needed for ftp, ftps, fish [over ssh] - also supports sftp, webdav[s])
LFTP Client - http://lftp.yar.ru/
mega backend (mega.co.nz)
Python library for mega API - https://github.com/ckornacker/mega.py, ubuntu ppa - ppa:ckornacker/backup
multi backend
Multi -- store to more than one backend
(also see A NOTE ON MULTI BACKEND ) below.
ncftp backend (ftp, select via ncftp+ftp://)
NcFTP - http://www.ncftp.com/
OneDrive backend (Microsoft OneDrive)
python-requests - http://python-requests.org
python-requests-oauthlib - https://github.com/requests/requests-oauthlib
Par2 Wrapper Backend
par2cmdline - http://parchive.sourceforge.net/
pydrive backend
PyDrive -- a wrapper library of google-api-python-client - https://pypi.python.org/pypi/PyDrive
(also see A NOTE ON PYDRIVE BACKEND ) below.
rsync backend
rsync client binary - http://rsync.samba.org/
ssh paramiko backend (default)
paramiko (SSH2 for python) - http://pypi.python.org/pypi/paramiko (downloads); http://github.com/paramiko/paramiko (project page)
pycrypto (Python Cryptography Toolkit) - http://www.dlitz.net/software/pycrypto/
ssh pexpect backend
sftp/scp client binaries OpenSSH - http://www.openssh.com/
Python pexpect module - http://pexpect.sourceforge.net/pexpect.html
swift backend (OpenStack Object Storage)
Python swiftclient module - https://github.com/openstack/python-swiftclient/
Python keystoneclient module - https://github.com/openstack/python-keystoneclient/
webdav backend
certificate authority database file for ssl certificate verification of HTTPS connections - http://curl.haxx.se/docs/caextract.html
(also see A NOTE ON SSL CERTIFICATE VERIFICATION).
Python kerberos module for kerberos authentication - https://github.com/02strich/pykerberos
MediaFire backend
MediaFire Python Open SDK - https://pypi.python.org/pypi/mediafire/

AUTHOR

Original Author - Ben Escoto <[email protected]>
Current Maintainer - Kenneth Loafman <[email protected]>
Continuous Contributors
Edgar Soldin, Mike Terry

Most backends were contributed individually. Information about their authorship may be found in the according file's header.

Also we'd like to thank everybody posting issues to the mailing list or on launchpad, sending in patches or contributing otherwise. Duplicity wouldn't be as stable and useful if it weren't for you.

A special thanks goes to rsync.net, a Cloud Storage provider with explicit support for duplicity, for several monetary donations and for providing a special "duplicity friends" rate for their offsite backup service. Email [email protected] for details.