fence_drac(8) I/O Fencing agent for Dell DRAC IV

DESCRIPTION

fence_drac is an I/O Fencing agent which can be used with the Dell Remote Access Card (DRAC). This card provides remote access to controlling power to a server. It logs into the DRAC through the telnet interface of the card. By default, the telnet interface is not enabled. To enable the interface, you will need to use the racadm command in the racser-devel rpm available from Dell. To enable telnet on the DRAC: [root]# racadm config -g cfgSerial -o cfgSerialTelnetEnable 1 [root]# racadm racreset

fence_drac accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_drac can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.dell.com

PARAMETERS

        

-o, --action=[action]
Fencing action (Default Value: reboot)         
-c, --command-prompt=[prompt]
Force Python regex for command prompt (Default Value: ['\[username\]# '])         
-4, --inet4-only
Forces agent to use IPv4 addresses only         
-6, --inet6-only
Forces agent to use IPv6 addresses only         
-a, --ip=[ip]
IP address or hostname of fencing device         
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 23)         
-l, --username=[name]
Login name This parameter is always required.         
-p, --password=[password]
Login password or passphrase         
-S, --password-script=[script]
Script to run to retrieve password         
-n, --plug=[ip]
IP address or hostname of fencing device (together with --port-as-ip)         
-v, --verbose
Verbose mode         
-D, --debug-file=[debugfile]
Write debug information to given file         
-V, --version
Display version information and exit         
-h, --help
Display help and exit         
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)         
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)         
--port-as-ip
Make "port/plug" to be an alias to IP address         
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)         
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)         
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)         
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)         
--telnet-path=[path]
Path to telnet binary (Default Value: /usr/bin/telnet)

ACTIONS

        

on
Power on machine.         
off
Power off machine.         
reboot
Reboot machine.         
status
This returns the status of the plug/virtual machine.         
monitor
Check the health of fence device         
metadata
Display the XML metadata describing this resource.         
validate-all
Validate if all required parameters are entered.

STDIN PARAMETERS

        

action
Fencing action (Default Value: reboot)         
cmd_prompt
Force Python regex for command prompt (Default Value: ['\[username\]# '])         
inet4_only
Forces agent to use IPv4 addresses only         
inet6_only
Forces agent to use IPv6 addresses only         
ipaddr
IP address or hostname of fencing device         
ipport
TCP/UDP port to use for connection with device (Default Value: 23)         
login
Login name This parameter is always required.         
passwd
Login password or passphrase         
passwd_script
Script to run to retrieve password         
port
IP address or hostname of fencing device (together with --port-as-ip)         
verbose
Verbose mode         
debug
Write debug information to given file         
version
Display version information and exit         
help
Display help and exit         
delay
Wait X seconds before fencing is started (Default Value: 0)         
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)         
port_as_ip
Make "port/plug" to be an alias to IP address         
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)         
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)         
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)         
retry_on
Count of attempts to retry power on (Default Value: 1)         
telnet_path
Path to telnet binary (Default Value: /usr/bin/telnet)