man ipmiutil_ekanalyzer (8): run FRU-Ekeying analyzer with FRU files

SYNOPSIS

ipmiutil ekanalyzer [-mx -NPRUEFJTVY] commands (deprecated, see ifru instead)

DESCRIPTION

ipmiutil ekanalyzer is a program that analyzes FRU Ekeying information from files saved from PICMG IPMI systems.

ekanalyzer command xx=filename1 xx=filename2 [rc=filename3]
NOTE: This command can support a maximum of 8 files per command line

filename1

binary file that stores FRU data of a Carrier or an AMC module

filename2

binary file that stores FRU data of an AMC module. These binary files can be generated from this command:
ipmiutil fru -i id -d filename

filename3

configuration file used for configuring On-Carrier Device ID or OEM GUID. This file is optional.

xx

indicates the type of the file. It can take the following value:

     oc : On-Carrier device

     a1 : AMC slot A1

     a2 : AMC slot A2

     a3 : AMC slot A3

     a4 : AMC slot A4

     b1 : AMC slot B1

     b2 : AMC slot B2

     b3 : AMC slot B3

     b4 : AMC slot B4

     sm : Shelf Manager

OPTIONS

-m 002000: Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00). This could be used for PICMG or ATCA blade systems. The trailing character, if present, indicates SMI addressing if 's', or IPMB addressing if 'i' or not present.
-x: Causes extra debug messages to be displayed.
-N nodename: Nodename or IP address of the remote target system. If a nodename is specified, IPMI LAN interface is used. Otherwise the local system management interface is used.
-P/-R rmt_pswd: Remote password for the nodename given. The default is a null password.
-U rmt_user: Remote username for the nodename given. The default is a null username.
-E: Use the remote password from Environment variable IPMI_PASSWORD.
-F drv_t: Force the driver type to one of the followng: imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. Note that lan2i means lan2 with intelplus. The default is to detect any available driver type and use it.
-J: Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, 1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, 5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. Default is 3.
-T: Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.
-V: Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level.
-Y: Yes, do prompt the user for the IPMI LAN remote password. Alternatives for the password are -E or -P.

COMMANDS

The available commands for ekanalyzer are:

print [carrier | power | all]

carrier (default) oc=filename1 oc=filename2 ...

Display point to point physical connectivity between carriers and AMC modules.
Example:
   # ipmiutil ekanalyzer print carrier oc=fru oc=carrierfru
   From Carrier file: fru
      Number of AMC bays supported by Carrier: 2
      AMC slot B1 topology:
         Port 0 =====> On Carrier Device ID 0, Port 16
         Port 1 =====> On Carrier Device ID 0, Port 12
         Port 2 =====> AMC slot B2, Port 2
      AMC slot B2 topology:
         Port 0 =====> On Carrier Device ID 0, Port 3
         Port 2 =====> AMC slot B1, Port 2
   *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
   From Carrier file: carrierfru
      On Carrier Device ID 0 topology:
         Port 0 =====> AMC slot B1, Port 4
         Port 1 =====> AMC slot B1, Port 5
         Port 2 =====> AMC slot B2, Port 6
         Port 3 =====> AMC slot B2, Port 7
      AMC slot B1 topology:
         Port 0 =====> AMC slot B2, Port 0
      AMC slot B1 topology:
         Port 1 =====> AMC slot B2, Port 1
      Number of AMC bays supported by Carrier: 2

power xx=filename1 xx=filename2 ...

Display power supply information between carrier and AMC modules.

all xx=filename xx=filename ...

Display both physical connectivity and power supply of each carrier and AMC modules.

frushow xx=filename

Convert a binary FRU file into human readable text format. Use -v option to get more display information.

summary [match | unmatch | all]

match (default) xx=filename xx=filename ...: Display only matched results of Ekeying match between an On-Carrier device and an AMC module or between 2 AMC modules. Example:
# ipmiutil ekanalyzer summary match oc=fru b1=amcB1 a2=amcA2
On-Carrier Device vs AMC slot B1
  AMC slot B1 port 0 ==> On-Carrier Device 0 port 16
   Matching Result
   From On-Carrier Device ID 0
     Channel ID 11 || Lane 0: enable
     Link Type: AMC.2 Ethernet
     Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
     Link Group ID: 0 || Link Asym. Match: exact match
   To AMC slot B1
     Channel ID 0 || Lane 0: enable
     Link Type: AMC.2 Ethernet
     Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
     Link Group ID: 0 || Link Asym. Match: exact match
   *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
  AMC slot B1 port 1 ==> On-Carrier Device 0 port 12
   Matching Result
   From On-Carrier Device ID 0
     Channel ID 6 || Lane 0: enable
     Link Type: AMC.2 Ethernet
     Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
     Link Group ID: 0 || Link Asym. Match: exact match
   To AMC slot B1
     Channel ID 1 || Lane 0: enable
     Link Type: AMC.2 Ethernet
     Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
     Link Group ID: 0 || Link Asym. Match: exact match
   *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
On-Carrier Device vs AMC slot A2
  AMC slot A2 port 0 ==> On-Carrier Device 0 port 3
   Matching Result
   From On-Carrier Device ID 0
     Channel ID 9 || Lane 0: enable
     Link Type: AMC.2 Ethernet
     Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
     Link Group ID: 0 || Link Asym. Match: exact match
   To AMC slot A2
     Channel ID 0 || Lane 0: enable
     Link Type: AMC.2 Ethernet
     Link Type extension: 1000BASE-BX (SerDES Gigabit) Ethernet link
     Link Group ID: 0 || Link Asym. Match: exact match
   *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
AMC slot B1 vs AMC slot A2
  AMC slot A2 port 2 ==> AMC slot B1 port 2
   Matching Result
   From AMC slot B1
     Channel ID 2 || Lane 0: enable
     Link Type: AMC.3 Storage
     Link Type extension: Serial Attached SCSI (SAS/SATA)
     Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
   To AMC slot A2
     Channel ID 2 || Lane 0: enable
     Link Type: AMC.3 Storage
     Link Type extension: Serial Attached SCSI (SAS/SATA)
     Link Group ID: 0 || Link Asym. Match: FC or SAS interface {exact match}
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
unmatch xx=filename xx=filename ...: Display the unmatched results of Ekeying match between an On-Carrier device and an AMC module or between 2 AMC modules
all xx=filename xx=filename ...: Display both matched result and unmatched results of Ekeying match between two cards or two modules.

WARNINGS

See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.

COPYRIGHT

See the file COPYING in the distribution for more details regarding redistribution.

This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.

AUTHOR

Andy Cress <arcress at users.sourceforge.net>