liebert-esp2(8) Driver for Liebert UPS, using the ESP-II serial protocol

NOTE

This man page only documents the hardware-specific features of the liebert-esp2 driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

This is an experimental driver. You have been warned.

EXTRA ARGUMENTS

This driver supports the following optional settings in ups.conf(5):

baudrate=num

Set the speed of the serial connection - 1200, 2400 (default), 4800, 9600 or 19200.

AUTHOR

Richard Gregory <R.Gregory at liverpool.ac.uk>, Arjen de Korte <adkorte-guest at alioth.debian.org>

The core driver:

nutupsdrv(8)

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/