LLDP-MED(8) Show / manipulate MED TLV configurations

SYNOPSIS

lldptool -t -i ethx -V [ TLV_TYPE ] enableTx

lldptool -T -i ethx -V [ TLV_TYPE ] enableTx = { yes | no }

lldptool -T -i ethx -V LLDP-MED devtype = { class1 | class2 | class3 }

lldptool -t -i ethx -V LLDP-MED devtype


TLV_TYPE : = {LLDP-MED | medCap | medPolicy | medLoc | medPower | medHwRev | medFwRev | medSwRev | medSerNum | medManuf | medModel | medAssetID }

DESCRIPTION

The LLDP-MED extensions support the Link Layer Discovery Protocol for Media Endpoint Devices defined in the ANSI/TIA-1057-2006 document. Each TLV can be configured as a class1 , class2 or class3 device. Class I devices are the most basic class of Endpoint Device, Class II devices support media stream capabilities and Class III devices directly support end users of the IP communication system. See ANS-TIA-1057 for clarification of class types.

ARGUMENTS

enableTx
Enables the TLV to be transmitted
devtype
Set or query the class type of the device.

TLV_TYPE

List of supported TLV specifiers applicable to Media Endpoint Devices.

LLDP-MED
apply arguments to all supported MED TLVs.

medCAP
LLDP-MED Capabilities TLV

medPolicy
LLDP-MED Network Policy TLV

medLoc
LLDP-MED Location TLV

medPower
LLDP-MED Extended Power-via-MDI TLV

medHwRev
LLDP-MED Hardware Revision TLV

medFwRev
LLDP-MED Firmware Revision TLV

medSwRev
LLDP-MED Software Revision TLV

medSerNum
LLDP-MED Serial Number TLV

medManuf
LLDP-MED Manufacturer Name TL

medModel
LLDP-MED Model Name TLV

medAssetID
LLDP-MED Asset ID TLV

EXAMPLE & USAGE

Enable class1 MED device on eth2
lldptool -T -i eth2 -V LLDP-MED enableTx=yes devtype=class1
Query class type of MED on eth2
lldptool -t -i eth2 -V LLDP-MED -c devtype
Query transmit state of medPolicy on device eth2
lldptool -t -i eth2 -V medPolicy -c enableTx

NOTES

AUTHOR

John Fastabend