connect to a serial port and log output
ttysrv [-o option] [-s sock] [-l log] -t tty [-b baud] [-p parity] [-w wordsize] [-i pidfile]
is the backend for
It connects to the serial port, handles the log file and waits for connections
from rconsole to view what's happening on the serial console.
- -t tty
Specify which device to connect to.
- -s sock
The name of the socket to listen for connections from rconsole on.
- -o option
Specify any ttyios options to open the port with. Currently only
- -l log
The logfile to write to. If not set then no log is kept.
- -b baud
Set the baud rate to talk to the port at. Defaults to 9600.
- -p parity
Set the parity for the serial port. Defaults to none.
- -w wordsize
Set the word size for the serial port. Defaults to 8 bits.
- -i pidfile
The file to write the pid of ttysrv to. If not specified no such file is
rtty was written by Paul Vixie <[email protected]
>. This manual page was written
by Jonathan McDowell <[email protected]
> for the Debian project (but may be
used by others).