uhd_siggen(1) Signal Generator using UHD hardware

SYNOPSIS

uhd_siggen: [options]

DESCRIPTION

Command-line signal generator application.

OPTIONS

-h, --help
show this help message and exit
-a ARGS, --args=ARGS
UHD device address args , [default=]
--spec=SPEC
Subdevice of UHD device where appropriate
-A ANTENNA, --antenna=ANTENNA
select Rx Antenna where appropriate
-s SAMP_RATE, --samp-rate=SAMP_RATE
set sample rate (bandwidth) [default=1000000.0]
-g GAIN, --gain=GAIN
set gain in dB (default is midpoint)
-f FREQ, --tx-freq=FREQ
Set carrier frequency to FREQ [default=mid-point]
-x WAVEFORM_FREQ, --waveform-freq=WAVEFORM_FREQ
Set baseband waveform frequency to FREQ [default=0]
-y WAVEFORM2_FREQ, --waveform2-freq=WAVEFORM2_FREQ
Set 2nd waveform frequency to FREQ [default=none]
--sine
Generate a carrier modulated by a complex sine wave
--const
Generate a constant carrier
--offset=OFFSET
Set waveform phase offset to OFFSET [default=0]
--gaussian
Generate Gaussian random output
--uniform
Generate Uniform random output
--2tone
Generate Two Tone signal for IMD testing
--sweep
Generate a swept sine wave
--amplitude=AMPL
Set output amplitude to AMPL (0.0-1.0) [default=0.15]
-v, --verbose
Use verbose console output [default=False]