VistaIOIdentifyFiles(3) identify files specified by command line arguments

SYNOPSIS

#include <vistaio.h>
VistaIOBoolean VistaIOIdentifyFiles (noptions, options, keyword, argc, argv, fd)

int noptions; VistaIOOptionDescRec options[noptions]; VistaIOStringConst keyword; int *argc; char *argv; int fd;

ARGUMENTS

noptions
Specifies the number of entries in the table of option descriptors.
options
Specifies the location of the table of option descriptors.
keyword
Specifies the option keyword that is used on the command line to specify filenames.
argc
Specifies the number of command line arguments to be parsed, and returns the number of arguments that were not recognized as valid filenames.
argv
Specifies a vector of command line arguments to be parsed, and returns a vector of the arguments that were not recognized as valid filenames.
fd
May specify an open file descriptor that should be checked to ensure it corresponds to a file or pipe if no filenames are explicitly given by command line arguments. Or it may be -1 to indicate that no such checking should be done.

DESCRIPTION

By convention, a Vista program that reads one or more files can be told of those files in any of three ways:
(a)
the filenames can be supplied as arguments to a command line option (e.g., vxview -in file1 file2 ...);
(b)
the filenames can be supplied as command line arguments not associated with any particular option (e.g., vxview file1 file2 ...); or
(c)
a file can be directed to the program's standard input stream (e.g., vxview < file1).

In parsing a command's arguments, these alternatives are considered in order. That is, first the program looks for an appropriate command line option (e.g., -in). If no such option has been specified, it checks for command line arguments not associated with any option. If those are also absent, it tries to read its file from the standard input stream.

Similarly, an output file may be specified using a command line option (e.g., vconvolve -out file1), or, by omitting the option and directing the program's standard output stream (e.g., vconvolve > file1).

VistaIOIdentifyFiles identifies a program's input files or output files according to this convention. It is called after VistaIOParseCommand(3) has parsed any command line arguments that can be identified as options, leaving the remaining arguments in *argc and argv. VistaIOIdentifyFiles is then called once to identify any input files, and perhaps again to identify an output file.

The noptions and options parameters specify the table used earlier by VistaIOParseCommand to parse command line options. (See VistaIOoption(3) for details.) The argc and argv parameters specify a list of command line arguments that VistaIOParseCommand has returned as unparsed (including the program's name, which should be first in this list). The keyword parameter specifies the command line option that may be used to specify filenames (e.g., ``in'' or ``out''), absent any ``-'' prefix. The entry in the option table for the option specified by keyword must (a) refer to a ``found'' flag that VistaIOParseCommand can use to record whether or not the option is present on the command line, and (b) refer to a location where the option's arguments can be stored.

VistaIOIdentifyFiles consults the ``found'' flag to determine whether the option was present on the command line. If it was, VistaIOIdentifyFiles returns immediately. Otherwise, it then examines *argc to determine whether an appropriate number of unparsed command line arguments exist. If there are a sufficient number of arguments present, they are interpreted as filenames and stored at the location indicated by the option table entry

Finally, if no filenames are found either as arguments to a -keyword option or as additional command line arguments, VistaIOIdentifyFiles considers the possibility that a file has been attached to a file descriptor such as the standard input or output stream. You may wish to ensure that a file is allowed to default to one of these streams only if the stream has been associated with a file or pipe, and not a terminal. In that case, pass as fd the file descriptor that will serve as the default source or destination of the file, and VistaIOIdentifyFiles will check that it is indeed associated with a file or pipe. Otherwise, pass -1 for fd and it will not perform this check.

RETURN VALUES

VistaIOIdentifyFiles returns TRUE if it finds one or more files specified on the command line, and if the number of files specified is compatible with the number field of the option table entry. It returns FALSE if no files were specified, if the wrong number of files were specified, or if the file would default to a file descriptor but the file descriptor fd is not associated with a file or pipe.

On successful return VistaIOIdentifyFiles will have eliminated, from the list represented by *argc and argv, any command line arguments that it identified as filenames. Also, the filenames found will be stored at the location indicated by the option table entry for keyword. A default to the standard input or output stream will be identified by a filename of ``-''.

EXAMPLE

The following fragment is drawn from a program that reads one or more files and writes a single file. The input files may be specified with a -in option, as extra command line arguments, or by being directed to the standard input stream. The output file may be specified with a -out option, and, if that option is not present, the file will be written to the standard output stream regardless of whether it is associated with a file or a terminal.

VistaIOArgVector in_filenames;
VistaIOStringConst out_filename;
VistaIOBoolean in_found, out_found;
VistaIOOptionDescRec options[] = {
        { "in", VistaIOStringRepn, 0, & in_filenames, & in_found, 
                NULL, "Input file(s)" },
        { "out", VistaIOStringRepn, 1, & out_filename, & out_found, 
                NULL, "Output file" }
};
main (int argc, char *argv)
{
        /* Parse command line options: */
        if (! VistaIOParseCommand (VistaIONumber (options), options,
                                        & argc, argv)) {
Usage:          VistaIOReportUsage (argv[0], VistaIONumber (options), options,
                                        "file1 file2...");
                exit (1);
        }
        /* Identify input file(s): */
        if (! VistaIOIdentifyFiles (VistaIONumber (options), options, "in",
                                        & argc, argv, 0))
                goto Usage;
        /* Any remaining unparsed arguments are erroneous: */
        if (argc > 1) {
                VistaIOReportBadArgs (argc, argv);
                goto Usage;
        }
        /* Identify output file: */
        if (! VistaIOIdentifyFiles (VistaIONumber (options), options, "out",
                                        & argc, argv, -1))
                goto Usage;
        /* Open and process each input file: */
        for (i = 0; i < in_filenames.number; i++) {
                filename = ((VistaIOStringConst *) in_filename.vector)[i];
                if (strcmp (filename, "-") != 0) {
                        f = fopen (filename, "r");
                        if (f == NULL)
                                VistaIOError ("Unable to open file \"%s\"", filename);
                } else f = stdin;
                ...
        }
}

DIAGNOSTICS

VistaIOIdentifyFiles reports errors in command line options by printing directly to the standard error stream. Error reports include the program name obtained from argv[0]. The following messages may be produced:
``n files must be specified by -keyword or extra command arguments''
The program requires that n files be specified (n > 1). Neither a -keyword option was present on the command line, nor were there at least n unparsed arguments that could be interpreted as filenames.
``No file specified by -keyword, extra command argument, or <''
The program requires that at least one file be specified, and it can be specified in any of three ways. However, it wasn't specified in any form.

In addition, VistaIOIdentifyFiles may invoke VistaIOError with the following messages:

``Option -keyword not defined in option table''
The keyword parameter specified a keyword not defined in the option table.
``No value storage for option -keyword''
The keyword parameter specifies an option table entry whose value field is NULL
``No "found" flag for option -keyword''
The keyword parameter specifies an option table entry whose found field doesn't point to a dedicated VistaIOBoolean variable.
``Failed to fstat() fd fd''
An fstat() call failed on the supplied file descriptor, fd.

AUTHOR

Art Pope <[email protected]>

Adaption to vistaio: Gert Wollny <[email protected]>