Yaws is fast lightweight webserver. It can run as daemon or in interactive mode where it is possible to directly interact with the webserver. Yaws is particularly good at generating dynamic content. See the user docs for more information on that topic.
- -i | --interactive
- Interactive mode. This will start yaws in interactive mode with an erlang prompt. All error_logger messages will be written to the tty as well in this mode. Use this when developing yaws code.
- -w | --winteractive
- Cygwin inteactive mode (werl)
- -D | --daemon
- Daemon mode. This will start yaws as a daemon.
- This will cause the yaws system to be automatically restarted in case it should crash. This switch also requires the --daemon switch to be present.
- This controls the number of restarts in a given time period that heart tolerates before refusing to restart Yaws. By default, heart allows up to 5 restarts within a 60 second period before refusing to restart Yaws again. This option allows up to C restarts in T seconds instead. To allow infinite restarts, set both C and T to 0. This switch automatically enables the --heart switch.
- Debug mode. This will produce some auxiliary error output for some error conditions. It will also start the otp sasl lib for additional error printouts.
Non-debug mode. This is useful for running interactively via the
FI-i option but without incurring the performance penalties of
- --conf file
- Use a different configuration file than the default. If the configuration parameter config is set, yaws use it as default configuration file. Else, The default configuration file when running as root is /etc/yaws/yaws.conf. When running as a non priviliged user, yaws will search for its configuration file in the following order. First in $HOME/yaws.conf, then in ./yaws.conf and finally in /etc/yaws/yaws.conf.
- --runmod module
Tells yaws to call module:start/0 at startup. This makes it possible
to startup user specific applications together with yaws.
- --pa path
Add path to the yaws system search path
Traffic trace mode. All traffic will be written to a trace file called trace.traffic
in the log directory.
HTTP trace mode. All HTTP messages will be written to a trace file called trace.http
in the log directory.
When yaws is put into trace mode using either --tracetraf or --tracehttp, traces are written to files. If we provide the --traceout flag, the trace will also be written to stdout.
Sames as --tracetraf --traceout. I.e. trace everything and write to stdout.
- --mnesiadir dir
Start Mnesia in directory <dir>
- --sname xxx
Start yaws as a distributed erlang node with name <xxx>
using the unqualified hostname as nodename postfix
By default, yaws starts erlang with +K true. This flag
- --name xxx
Start yaws as a distributed erlang node with name <xxx> using the
fully qualified hostname as nodename postfix
- --proto_dist Mod
Use module Mod for erlang distribution. This is typically only used
when we want to run erlang distribution over SSL.
- --erlarg STRING
- Pass STRING as an additional argument to the "erl" program. If STRING comprises multiple words, you must quote it so that your shell passes it to yaws as a single argument. If STRING contains any single quote characters, you must quote each of them as well. For example, to pass the option -env NAME O'Keeffe to "erl" from a Bourne-compatible shell:
--erlarg "-env NAME O\'Keeffe"
- --id ID
This flag sets the id. If we're starting a daemon (or an interactive
system) it gives the Yaws server the identity ID. This means that the
server will write all internal files into the directory
Yaws also creates a file called $HOME/.yaws/yaws/ID/CTL which contains the portnumber the daemon is listening on for control request by the control command such as "yaws --hup" etc.
If we're invoking a control command which should perform some control function on the daemon, we may have to give the --id flag also to the control command. If we don't do this the control command may interact with the wrong daemon due to finding the wrong "ctl" file.
The daemon may also optionally specify the "id" in the yaws.conf configuration file.
- --umask MASK
Set the umask for the daemon to MASK.
The following list of options are are used to control the daemon from the "outside" while it is running.
- --hup [--id ID]
- HUP the daemon. This forces the daemon to reread the configuration file. It also makes the daemon empty all its internal content caches. Hence when updating the doc root, HUPing the daemon is the fastest way to see the content updates.
- --stop [--id id]
- Stop the daemon (called id)
- Lists current ids and status of all yaws servers on localhost. In practice this amounts to a listdir in $HOME/.yaws/yaws - and check whether the different systems who has created files there are alive.
- --status [--id id]
- Query a running yaws daemon for its status, and print it.
- --stats [--id id]
- Query a running yaws daemon for its statistics, and print it.
- --running-config [--id id]
- Query a running yaws daemon for its current configuration, and print it. This can be useful when attempting to figure out how to set config in embedded mode. Configure yaws to you liking in non-embedded mode, run this command and use the output to populate the embedded mode records.
- --load Modules [--id id]
Try to (re)load erlang modules into a running daemon. This is useful
after modifying appmods or modules used by scripts.
- --debug-dump [--id id]
Produce a debug dump on stdout. In particular this code lists what
we refer to as suspicious processes. I.e. processes that might be
hanging or processes that are "large" - hardcoded to 40k words.
- --ctltrace [--id ID] http | traffic | off
Control the trace capabilities of a running yaws daemon. If the
http or traffic option is given, the daemon will write a log
for debug purposes into the logdir.
- --wait-started[=T] [--id ID]
Waits at most 30 seconds for the server to start. Exits with 0 if
server is running, 1 otherwise. Typically useful in test scripts. The
default 30 seconds can be modified by appending =T to the option,
where T is the desired number of seconds to wait for the server
- --check YawsFile [IncDirs ....]
- Test compile a `.yaws' file. Useful in Makefiles when we want to ensure that all .yaws files are syntactically correct
output version information and exit
Is used to determine where we write the temporary files. By default
all tmp files end up in $HOME/.yaws. This includes the JIT files
that are the result of processed .yaws files and also the so called
control file that is used by the daemon to write the port number
to which it is listening for control commands such as "yaws --status"
Thus HOME is the handle we use in the control commands to find the control file so that we know where to connect to.
Can be used to override the HOME variable. This is useful when we
for example are running yaws under port binding programs such as
It's useful by distros that don't want Yaws to write any files ever in the HOME directory of root.