SYNOPSIS
use Chart::Gnuplot;
# Data
my @x = (-10 .. 10);
my @y = (0 .. 20);
# Create chart object and specify the properties of the chart
my $chart = Chart::Gnuplot->new(
output => "fig/simple.png",
title => "Simple testing",
xlabel => "My x-axis label",
ylabel => "My y-axis label",
....
);
# Create dataset object and specify the properties of the dataset
my $dataSet = Chart::Gnuplot::DataSet->new(
xdata => \@x,
ydata => \@y,
title => "Plotting a line from Perl arrays",
style => "linespoints",
....
);
# Plot the data set on the chart
$chart->plot2d($dataSet);
##################################################
# Plot many data sets on a single chart
$chart->plot2d($dataSet1, $dataSet2, ...);
DESCRIPTION
This Perl module is to plot graphs uning GNUPLOT on the fly. In order to use this module, gnuplot need to be installed. If image format other than PS and EPS is required to generate, it is recommended to install the convert program of ImageMagick as well. Please refer to ``MECHANISM OF THIS MODULE'' for details.To plot chart using Chart::Gnuplot, a chart object and at least one dataset object are required. Information about the chart such as output file, chart title, axes labels and so on is specified in the chart object. Dataset object contains information about the dataset to be plotted, including source of the data points, dataset label, color used to plot and more.
After chart object and dataset object(s) are created, the chart can be plotted using the plot2d, plot3d or multiplot method of the chart object, e.g.
# $chart is the chart object
$chart->plot2d($dataSet1, $dataSet2, ...);
To illustate the features of Chart::Gnuplot, the best way is to show by examples. A lot of examples can be found in SourceForge <http://chartgnuplot.sourceforge.net>.
MECHANISM OF THIS MODULE
Casual users may skip this session.When the plotting method (e.g. plot2d) is called, Chart::Gnuplot would generate a Gnuplot script based on the information in the chart object and dataset object. Then it would call the Gnuplot program. Unless specified explicitly in terminal of the Chart object, Chart::Gnuplot would by default generate the image in PS format first and then convert the image (by ImageMagick) based on the extension of the filename. The rationale of this approach is that the postscript terminal is so far the best developed teriminal and so this would let users to enjoy the power of Gnuplot as much as possible.
Because the default terminal is postscript, if ImageMagick is not installed, you would always need to specify the terminal if the output format is not PS (or EPS).
On the other hand, for some image formats, e.g. mousing supported SVG, which ImageMagick cannot be converted to, the terminal must be set explicitly (e.g., "svg mousing" in this case).
CHART OBJECT
The chart object can be initiated by the c<new> method. Properties of the chart may be specified optionally when the object is initiated:
my $chart = Chart::Gnuplot->new(%options);
Chart Options
outputOutput file of the graph. E.g.
output => "fig/chart.png",
By default, the image format is detected automatically by the extension of the filename. (Please refer to ``MECHANISM OF THIS MODULE'' for details). However, it can also be changed manually by the terminal option or the format conversion methods such as convert and png.
Some of image formats that can be detected automatically are:
bmp : Microsoft Windows bitmap
epdf : Encapsulated Portable Document Format
epi : Encapsulated PostScript Interchange format
eps : Encapsulated PostScript
gif : Graphics Interchange Format
jpg : Joint Photographic Experts Group JFIF format
pdf : Portable Document Format
png : Portable Network Graphics
ppm : Portable Pixmap Format
ps : PostScript file
psd : Adobe Photoshop bitmap file
xpm : X Windows system pixmap
If the filename has no extension, postscipt format will be output.
title
Title of the chart. E.g.,
title => "Chart title"
Properties of the chart title can be specified in hash. E.g.,
title => {
text => "Chart title",
font => "arial, 20",
....
}
Supported properties are:
text : title in plain text
font : font face (and optionally font size)
color : font color
offset : offset relative to the default position
enhanced : title contains subscript/superscipt/greek? (on/off)
Default values would be used for properties not specified. These properties has no effect on the main title of the multi-chart (see multiplot).
xlabel, ylabel, zlabel
Label of the x-axis, y-axis and z-axis. E.g.
xlabel => "Bottom axis label"
Properties of the axis label can be specified in hash, similar to the chart title. Supported properties are:
text : title in plain text
font : font face (and optionally font size)
color : font color
offset : offset relative to the default position
rotate : rotation in degrees
enhanced : title contains subscript/superscipt/greek? (on/off)
x2label, y2label
Label of the secondary x-axis (displayed on the top of the graph) and the secondary y-axis (displayed on the right of the graph). See xlabel.
xrange, yrange, zrange
Range of the x-axis, y-axis and z-axis in the plot, e.g.
xrange => [0, "pi"]
would make the plot from x = 0 to x = 3.14159...
x2range, y2range
Range of the secondary (top horizontal and right vertical) axes of the plot. See ``xrange, yrange, zrange''.
trange, urange, vrange
Range of the parametric parameter (t for 2D plots, while u and v for 3D plots). See ``xrange, yrange, zrange''.
xtics, ytics, ztics
The tics and tic label on the x-axis, y-axis and z-axis. E.g.
xtics => {
labels => [-10, 15, 20, 25],
labelfmt => "%3f",
....
}
If you set this to "undef". E.g.,
xtics => undef
Then this option will be explicitly unset and the chart will have not have tic marks on the specified axis.
Supported properties are:
labels : the locations of the tic labels
start : the starting value for manually-specified range
incr : the increment for manually-specified range
end : the ending value for manually-specified range
labelfmt : format of the labels
font : font of the labels
fontsize : font size of the lebals
fontcolor : font color of the label
offset : position of the tic labels shifted from its default
rotate : rotation of the tic labels
length : length of the tics
along : where the tics are put (axis/border)
minor : number of minor tics between adjacant major tics
mirror : turn on and off the tic label of the secondary axis. No effect
: for C<ztics> (on/off)
x2tics, y2tics
The tics and tic label of the secondary axes. See ``xtics, ytics, ztics''.
legend
Legend describing the plots. Supported properties are:
position : position of the legend
width : number of character widths to be added or subtracted to the
: region of the legend
height : number of character heights to be added or subtracted to the
: region of the legend
align : alignment of the text label. Left or right (default)
order : order of the keys
title : title of the legend
sample : format of the sample lines
border : border of the legend
See border for the available options of border
E.g.
legend => {
position => "outside bottom",
width => 3,
height => 4,
align => "right",
order => "horizontal reverse",
title => "Title of the legend",
sample => {
length => 3,
position => "left",
spacing => 2,
},
border => {
linetype => 2,
width => 1,
color => "blue",
},
}
timeaxis
Specify the axes of which the tic labels are date/time string. Possible values are combinations of ``x'', ``y'', ``x2'', and ``y2'' joined by ``,''. E.g.
timeaxis => "x, y2"
means that the x-axis and y2-axis are data/time axes.
border
Border of the graph. Properties supported are:
sides : sides on which border is displayed
linetype : line type
width : line width
color : line coler
E.g.
border => {
sides => "bottom, left",
linetype => 3,
width => 2,
color => '#ff00ff',
}
"sides" tells which side(s) will be displayed. Default is all four borders for 2D plots, and four bottom and left vertial borders for 3D plots. Acceptable valurs are the 12-bit code (see the Gnuplot manual) or the following names:
bottom
left
top
right
bottom left front
bottom left back
bottom right front
bottom right back
left vertical
right vertical
front vertical
back vertical
top left front
top left back
top right front
top right back
If you set this to "undef". E.g.,
border => undef
Then this option will be explicitly unset and the chart will have not have any border.
grid
Major grid lines. E.g.
grid => {
linetype => 'dash',
width => 2,
....
}
Supported properties are:
linetype : line type of the grid lines (default: dot)
width : line width (defaulr: 0)
color : line color (default: black)
xlines : whether the vertical grid lines are drawn (on/off)
ylines : whether the horizontal grid lines are drawn (on/off)
tmargin, bmargin
Top and bottom margin (in character height). This option has no effect in 3D plots. E.g.
tmargin => 10
lmargin, rmargin
Left amd right margin (in character width). This option has no effect in 3D plots. See ``tmargin, bmargin''.
orient
Orientation of the image. Possible values are ``lanscape'' (default) and ``portrait''. E.g.
orient => "portrait"
imagesize
Size (length and height) of the image relative to the default. E.g.
imagesize => "0.8, 0.5"
size
Size of the plot relative to the chart size. This is useful in some multi-plot such as inset chart. E.g.
size => "0.5, 0.4"
origin
Origin of the chart. This is useful in some multi-plot such as inset chart. E.g.
origin => "0.1, 0.5"
timestamp
Time stamp of the plot. To place the time stamp with default setting,
timestamp => 'on'
Properties of the time stamp (such as date-time format) can also be set, e.g.
timestamp => {
fmt => '%d/%m/%y %H:%M',
offset => "10,-3",
font => "Helvetica",
}
Supported properties are:
fmt : date-time format
offset : offset relative to the default position
font : font face (and optionally font size)
bg
Background color of the chart. This option has no effect in the sub-chart of multiplot. E.g. to give the chart a yellow background,
bg => "yellow"
Properties can be specified in hash. E.g.,
bg => {
color => "yellow",
density => 0.2,
}
Supported properties are:
color : color (name ot RRGGBB value)
density : density of the coloring
plotbg
Background color of the plot area. This option has no effect in 3D plots. See bg for supported properties.
gnuplot
The path of Gnuplot executable. This option is useful if you are using Windows or have multiple versions of Gnuplot installed. E.g.,
gnuplot => "C:\Program Files\...\gnuplot\bin\wgnuplot.exe" # for Windows
convert
The path of convert executable of ImageMagick. This option is useful if you have multiple convert executables.
terminal
The terminal driver that Gnuplot uses. E.g.,
terminal => 'svg mousing'
The default value is "postscript enhanced color". Terminal is not necessarily related to the output image format. E.g., you may use gif terminal and then convert the image format to jpg by the convert() method.
Chart Options Not Mentioned Above
If Chart::Gnuplot encounters options not mentions above, it would convert them to Gnuplot set statements. E.g. if the chart object is
$chart = Chart::Gnuplot->new(
...
foo => "FOO",
);
the generated Gnuplot statements would be:
...
set foo FOO
This mechanism lets Chart::Gnuplot support many features not mentioned above (such as ``cbrange'', ``samples'', ``view'' and so on).
Chart Methods
new
my $chart = Chart::Gnuplot->new(%options);
Constructor of the chart object. If no option is specified, default values would be used. See ``Chart Options'' for available options.
set
General set methods for arbitrary number of options.
$chart->set(%options);
E.g.
$chart->set(view => '30,60');
will be translated to the Gnuplot statement
set view 30,60
plot2d
$chart->plot2d(@dataSets);
Plot the data sets in a 2D chart. Each dataset is represented by a dataset object.
plot3d
$chert->plot3d(@dataSets);
Plot the data sets in a 3D chart. Each dataset is represented by a dataset object.
multiplot
$chart->multiplot(@charts);
Plot multiple charts in the same image.
animate
Create animated gif. E.g.
# Create (main) chart object
my $chart = Chart::Gnuplot->new(
output => "animate.gif",
);
# Add frames to the (main) chart object
my $T = 30; # number of frames
my @c;
for (my $i = 0; $i < $T; $i++)
{
$c[$i] = Chart::Gnuplot->new(xlabel => 'x');
my $ds = Chart::Gnuplot::DataSet->new(
func => "sin($i*2*pi/$T + x)",
);
$c[$i]->add2d($ds);
}
# Create animation
$chart->animate(
charts => \@c,
delay => 10, # delay 0.1 sec between successive images
);
Supported properties are:
charts : chart sequence used to create the animation
delay : delay (in units of 0.01 second) between successive images, default
: value is 5
See add2d and add3d.
add2d
Add a 2D dataset to a chart without plotting it out immediately. Used with "multiplot" or "animate".
add3d
Add a 3D dataset to a chart without plotting it out immediately. Used with "multiplot" or "animate".
label
Add an arbitrary text label. e.g.,
$chart->label(
text => "This is a label",
position => "0.2, 3 left",
offset => "2,2",
rotate => 45,
font => "arial, 15",
fontcolor => "dark-blue",
pointtype => 3,
pointsize => 5,
pointcolor => "blue",
);
Supported properties are:
text : label text
position : position of the label
offset : offset relative to the default position
rotate : rotation in degrees
font : font face (and optionally font size)
fontcolor : color of the text
pointtype : point type
pointsize : point size
pointcolor : point color
arrow
Draw arbitrary arrow. e.g.,
$chart->arrow(
from => "0,2",
to => "0.3,0.1",
linetype => 'dash',
width => 2,
color => "dark-blue",
head => {
size => 2,
angle => 30,
},
);
Supported properties are:
from : starting position
to : ending position (position of the arrow head)
rto : ending position relative to the starting position
linetype : line type
width : line width
color : color
head : arrow head
Supported properties of the arrow head are:
size : size of the head
angle : angle (in degree) between the arrow and the head branch
direction : head direction ('back', 'both' or 'off')
line
Draw arbitrary straight line. e.g.,
$chart->line(
from => "0,2",
to => "0.3,0.1",
linetype => 'dash',
width => 2,
color => "dark-blue",
);
Supported properties are:
from : starting position
to : ending position (position of the arrow head)
rto : ending position relative to the starting position
linetype : line type
width : line width
color : color
rectangle
Draw arbitrary rectangle. e.g.,
$chart->rectangle(
from => "screen 0.2, screen 0.2",
to => "screen 0.4, screen 0.4",
fill => {
density => 0.2,
color => "#11ff11",
},
border => {color => "blue"},
linewidth => 3,
layer => 'front',
index => 1,
);
Most properties of a rectangle can be classified into location, dimension, filling and border. Location and dimension of the rectangle can be specified by "from" and "to", or "from" and "rto", or "at", "width" and "height". Filling can be specified by "color" and "density", or "pattern". Border has only one property "color" so far. Besides, "linewidth" controls the line width of the border as well as the filling pattern. The layer that the rectangle is drawn is set by "layer". The "index" is a tag of the rectangle, which usually can be omitted.
ellipse
Draw arbitrary ellipse. e.g.,
$chart->ellipse(
at => "screen 0.2, screen 0.2",
width => 0.2,
height => 0.5
fill => {pattern => 2},
border => {color => "blue"},
);
The properties of "ellipse" is the same as those of rectangle, except that its location and dimension must be set by "at", "width" and "height".
circle
Draw arbitrary circle. e.g.,
$chart->circle(
at => "screen 0.2, screen 0.2",
size => 0.5
fill => {pattern => 2},
layer => 'behind',
);
The properties of "circle" is the same as those of rectangle, except that its location and dimension must be set by "at", "width" and "height".
polygon
Draw arbitrary polygon. e.g.,
$chart->polygon(
vertices => [
" 0, 0.2",
"-2, -0.2",
{to => "2, -0.3"},
{rto => "0, 0.3"},
],
fill => {pattern => 2},
border => {color => "blue"},
);
The location and dimension of the polygon are specified by an array of "vertices". Except "border", "pattern" of "fill", "index" and "layer", other properties of rectangle is not supported.
copy
Copy the chart object. This method is especially useful when you want to copy a chart with highly customized format. E.g.
my $chart = Chart::Gnuplot->new(
...
);
# $copy is a copy of $chart
my $copy = $chart->copy;
You may also make multiple copies . E.g.
my @copies = $chart->copy(10); # make 10 copies
convert
Convert the image format by ImageMagick, e.g.
$chart->convert('png');
png
$chart->png;
Change the image format to PNG.
gif
$chart->gif;
Change the image format to GIF.
jpg
$chart->jpg;
Change the image format to JPEG.
ps
$chart->ps;
Change the image format to postscript.
$chart->pdf
Change the image format to PDF.
command
$chart->command($gnuplotCommand);
Add a gnuplot command. This method is useful for the Gnuplot features that have not yet implemented.
$chart->command(\@gnuplotCommands);
Add a list of gnuplot commands.
execute
Execute Gnuplot. Normally users do not need to call this method directly because this method would be called automatically by other methods such as plot2d, multiplot and animate.
DATASET OBJECT
The dataset object can be initiated by the "new" method. Properties of the dataset may be specified optionally when the object is initiated:
my $dataset = Chart::Gnuplot::DataSet->new(%options);
The data source of the dataset can be specified by either one of the following ways:
- 1. Arrays of x values, y values and z values (in 3D plots) of the data points.
- 2. Array of data points. Each point is specified as an array of x, y, z coordinates
- 3. Data file.
- 4. Mathematical expression (for a function).
Dataset Options
xdata, ydata, zdataThe x, y, z values of the data points. E.g.
xdata => \@x
If "xdata" is omitted but "ydata" is defined, the integer index starting from 0 would be used for "xdata".
points
Data point matrix of the format [[x1,y1], [x2,y2], [x3,y3], ...]
points => \@points
datafile
Input data file
datafile => $file
The data files are assumed to be space-separated, with each row corresponding to one data point. Lines beginning with ``#'' are considered as comments and would be ignored. Other formats are not supported at this moment.
func
Mathematical function to be plotted. E.g.
func => "sin(x)*x**3"
Supported functions:
abs(x) : absolute value
acos(x) : inverse cosine
acosh(x) : inverse hyperbolic cosine
arg(x) : complex argument
asin(x) : inverse sine
asinh(x) : inverse hyperbolic sine
atan(x) : inverse tangent
atanh(x) : inverse hyperbolic tangent
besj0(x) : zeroth order Bessel function of the first kind
besj1(x) : first order Bessel function of the first kind
besy0(x) : zeroth order Bessel function of the second kind
besy1(x) : first order Bessel function of the second kind
ceil(x) : ceiling function
cos(x) : cosine
cosh(x) : hyperbolic cosine
erf(x) : error function
erfc(x) : complementary error function
exp(x) : expontial function
floor(x) : floor function
gamma(x) : gamma function
ibeta(a,b,x) : incomplete beta function
inverf(x) : inverse error function
igamma(a,x) : incomplete gamma function
imag(x) : imaginary part
invnorm(x) : inverse normal distribution function
int(x) : integer part
lambertw(x) : Lambert W function
lgamma(x) : log gamma function
log(x) : natural logarithm
log10(x) : common logarithm
norm(x) : normal distribution function
rand(x) : pseudo random number
real(x) : real part
sgn(x) : sign function
sin(x) : sine
sinh(x) : hyperbolic sine
sqrt(x) : square root
tan(x) : tangent
tanh(x) : hyperbolic tangent
Please see the Gnuplot manual for updated information.
Supported mathematical constants:
pi : the circular constant 3.14159...
Supported arithmetic operators:
addition : +
division : /
exponentiation : **
factorial : !
modulo : %
multiplication : *
subtraction : -, e.g., 1-2
unary minus : -, e.g., -1
Supported logical operations:
and : &&
complement : ~
equality : ==
greater than : >
greater than or equal to : >=
inequality : !=
less than : <
less than or equal to : <=
negation : !
or : ||
if ... than else ... : ?:, e.g., a ? b : c
Parametric functions may be represented as hash. E.g.
func => {x => 'sin(t)', y => 'cos(t)'}
will draw a circle.
title
Title of the dataset (shown in the legend).
style
The plotting style for the dataset, including
lines : join adjacent points by straight lines
points : mark each points by a symbol
linespoints : both "lines" and "points"
dots : dot each points. Useful for large datasets
impluses : draw a vertical line from the x-axis to each point
steps : join adjacent points by steps
boxes : draw a centered box from the x-axis to each point
xerrorbars : "dots" with horizontal error bars
yerrorbars : "dots" with vertical error bars
xyerrorbars : both "xerrorbars" and "yerrorbars"
xerrorlines : "linespoints" with horizontal error bars
yerrorlines : "linespoints" with vertical error bars
xyerrorlines : both "xerrorlines" and "yerrorlines"
boxerrorbars : "boxes" with "yerrorbars"
boxxyerrorbars : use rectangles to represent the data with errors
financebars : finance bars for open, high, low and close price
candlesticks : candle sticks for open, high, low and close price
hbars : horizontal bars (experimental)
hlines : horizontal lines (experimental)
vectors : arrows
circles : circles, for say, bubble charts
histograms : for plotting histograms
"hbars" and "hlines" are available only if the data is input from "points" or "(x,y)data".
color
Color of the dataset in the plot. Can be a named color or RBG (#RRGGBB) value. The supported color names can be found in the file doc/colors.txt in the distribution. E.g.
color => "#99ccff"
is equivalent to
color => "dark-red"
width
Line width used in the plot. The default width is 1.
linetype
Line type. Can be an integer or line type name. The supported line type names can be found in the file doc/linetypes.txt in the distribution. E.g.
linetype => 3
is equivalent to
linetype => 'dash'
Note: the line type may not be displayed as the name if "terminal" is set and is not postscript.
pointtype
Point type. Can be an integer or point type name. The supported point type names can be found in the file doc/pointtypes.txt in the distribution. E.g.
pointtype => 64
is equivalent to
pointtype => 'square'
Note: the point type may not be displayed as the name if "terminal" is set and is not postscript.
pointsize
Point size of the plot. E.g.
pointsize => 3
The default point size is 1.
fill
Filling the boxes. Has effect only on plotting styles with boxes, such as ``boxes'', ``boxxyerrorbars'' and ``financebars''. To fill with pattern,
fill => {
pattern => 1,
}
"pattern" may be an interger from 0 (no filling) to 7.
To fill with solid,
fill => {
color => '#33bb33',
density => 0.2,
}
"color" may be named color or RGB (#RRGGBB). "density" may be a real number from 0 (empty) to 1.
border
Border of the boxes. Has effect only on plotting styles with boxes and if "fill" is set. "color" (either named color or RGB) is the only supported property. E.g.
border => {
color => 'blue',
}
axes
Axes used in the plot. Possible values are ``x1y1'', ``x1y2'', ``x2y1'' and ``x2y2''.
timefmt
Time format of the input data. The valid format are:
%d : day of the month, 1-31
%m : month of the year, 1-12
%y : year, 2-digit, 0-99
%Y : year, 4-digit
%j : day of the year, 1-365
%H : hour, 0-24
%M : minute, 0-60
%s : seconds since the Unix epoch (1970-01-01 00:00 UTC)
%S : second, 0-60
%b : name of the month, 3-character abbreviation
%B : name of the month
smooth
The smooth method used in plotting data points. Supported methods include cubic splines (csplines), Bezier curve (bezier) and other. Please see Gnuplot manual for details.
using
The "using" keyword of Gnuplot.
every
The "every" keyword of Gnuplot. Has effect only if the data is input from "datafile".
index
The "index" keyword of Gnuplot. Has effect only if the data is input from "datafile".
Dataset Methods
new
my $dataset = Chart::Gnuplot::DataSet->new(%options);
Constructor of the dataset object. If no option is specified, default values would be used. See ``Dataset Options'' for available options.
copy
Copy the dataset object. This method is especially useful when you want to copy a dataset with highly customized format. E.g.
my $dataset = Chart::Gnuplot::DataSet->new(
...
);
# $copy and $dataset will have the same format and contain the same data
my $copy = $dataset->copy;
You may also make multiple copies . E.g.
my @copies = $dataset->copy(10); # make 10 copies
EXAMPLES
Some simple examples are shown below. Many more come with the distribution.- 1. Plot a mathematical expression
-
my $chart = Chart::Gnuplot->new( output => "expression.png" ); my $dataSet = Chart::Gnuplot::DataSet->new( func => "sin(x)" ); $chart->plot2d($dataSet); - 2. Plot from two Perl arrays, one for the x-axis data and the other the y-axis.
-
my $chart = Chart::Gnuplot->new( output => "arrays.png" ); my $dataSet = Chart::Gnuplot::DataSet->new( xdata => \@x, ydata => \@y, ); $chart->plot2d($dataSet); - 3. Plot x-y pairs
-
# Data my @xy = ( [1.1, -3], [1.2, -2], [3.5, 0], ... ); my $chart = Chart::Gnuplot->new( output => "points.png" ); my $dataSet = Chart::Gnuplot::DataSet->new( points => \@xy ); $chart->plot2d($dataSet); - 4. Plot data from a data file
-
my $chart = Chart::Gnuplot->new( output => "file.png" ); my $dataSet = Chart::Gnuplot::DataSet->new( datafile => "in.dat" ); $chart->plot2d($dataSet); - 5. Chart title, axis label and legend
-
# Chart object my $chart = Chart::Gnuplot->new( output => "trigonometric.gif", title => "Three basic trigonometric functions", xlabel => "angle in radian", ylabel => "function value" ); # Data set objects my $sine = Chart::Gnuplot::DataSet->new( func => "sin(x)", title => "sine function" ); my $cosine = Chart::Gnuplot::DataSet->new( func => "cos(x)", title => "cosine function" ); my $tangent = Chart::Gnuplot::DataSet->new( func => "tan(x)", title => "tangent function" ); $chart->plot2d($sine, $cosine, $tangent); - 6. Title in non-English characters (Thanks to WOLfgang Schricker)
-
use Encode; my $title = ... # Title with German umlauts $title = decode("utf8", $title); Chart::Gnuplot->new( encoding => 'iso-8859-1', title => $title, ); - 7. Plot a financial time series
-
my $chart = Chart::Gnuplot->new( output => "dj.ps", title => "Dow-Jones Index time series", timeaxis => 'x', xtics => { labelfmt => '%b%y', }, ); my $dow = Chart::Gnuplot::DataSet->new( file => "dj.dat", timefmt => '%Y-%m-%d', # time format of the input data style => "candlesticks", grid => 'on', ); $chart->plot2d($dow); - 8. Plot several graphs on the same image
-
my $chart = Chart::Gnuplot->new( output => "multiplot.gif", ); my $left = Chart::Gnuplot->new(); my $sine = Chart::Gnuplot::DataSet->new( func => "sin(x)", ); $left->add2d($sine); my $center = Chart::Gnuplot->new(); my $cosine = Chart::Gnuplot::DataSet->new( func => "cos(x)", ); $center->add2d($cosine); my $right = Chart::Gnuplot->new(); my $tangent = Chart::Gnuplot::DataSet->new( func => "tan(x)", ); $right->add2d($tangent); # Place the Chart::Gnuplot objects in matrix to indicate their locations $chart->multiplot([ [$left, $center, $right] ]);
WISH LIST
- 1. Improve the manual.
- 2. Add curve fitting method.
- 3. Improve the testsuite.
- 4. Reduce number of temporary files generated.
REQUIREMENTS
Carp, File::Copy, File::Temp, StorableGnuplot <http://www.gnuplot.info>
ImageMagick <http://www.imagemagick.org> (for full feature)
AUTHOR
Ka-Wai Mak <[email protected]>COPYRIGHT
Copyright (c) 2008-2011, 2013-2015 Ka-Wai Mak. All rights reserved.LICENSE
This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself.