man Config::Model::models::LCDd::MtxOrb (3): Configuration class LCDd::MtxOrb

DESCRIPTION

Configuration classes used by Config::Model

generated from LCDd.conf

Elements

Brightness

Set the initial brightness Optional. Type integer. upstream_default: '1000'.

Contrast

Set the initial contrast NOTE: The driver will ignore this if the display
is a vfd or vkd as they don't have this feature. Optional. Type uniline. upstream_default: '480'.

Device

Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.

KeyMap_A

The following table translates from MtxOrb key letters to logical key names. By default no keys are mapped, meaning the keypad is not used at all. Optional. Type uniline. upstream_default: 'Left'.

KeyMap_B

Optional. Type uniline. upstream_default: 'Right'.

KeyMap_C

Optional. Type uniline. upstream_default: 'Up'.

KeyMap_D

Optional. Type uniline. upstream_default: 'Down'.

KeyMap_E

Optional. Type uniline. upstream_default: 'Enter'.

KeyMap_F

Optional. Type uniline. upstream_default: 'Escape'.

OffBrightness

Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type integer. upstream_default: '0'.

Size

Set the display size Optional. Type uniline. upstream_default: '20x4'.

Speed

Set the communication speed Optional. Type enum. choice: '1200', '2400', '9600', '19200'. upstream_default: '19200'.

Type

Set the display type Optional. Type enum. choice: 'lcd', 'lkd', 'vfd', 'vkd'. upstream_default: 'lcd'.

hasAdjustableBacklight

Some old displays do not have an adjustable backlight but only can switch the backlight on/off. If you experience randomly appearing block characters, try setting this to false. Optional. Type boolean. upstream_default: 'yes'.

keypad_test_mode

See the [menu] section for an explanation of the key mappings You can find out which key of your display sends which character by setting keypad_test_mode to yes and running LCDd. LCDd will output all characters it receives. Afterwards you can modify the settings above and set keypad_set_mode to no again. Optional. Type uniline. default: 'no'.