Create(1) Create ICC profile.

DESCRIPTION

Create ICC profile

SYNOPSIS

colprof [-options] inoutfile
-v
Verbose mode
-A manufacturer Manufacturer description string
-M model
Model description string
-D description
Profile Description string (Default "inoutfile")
-C copyright
Copyright string
-Z tmnb
Attributes: Transparency, Matte, Negative, BlackAndWhite
-Z prsa
Default intent: Perceptual, Rel. Colorimetric, Saturation, Abs. Colorimetric
-q lmhu
Quality - Low, Medium (def), High, Ultra
-b [lmhun]
Low quality B2A table - or specific B2A quality or none for input device
-ni
Don't create input (Device) shaper curves
-np
Don't create input (Device) grid position curves
-no
Don't create output (PCS) shaper curves
-nc
Don't put the input .ti3 data in the profile
-k zhxr
Black value target: z = zero K, h = 0.5 K, x = max K, r = ramp K (def.)
-k p stle stpo enpo enle shape
stle: K level at White 0.0 - 1.0 stpo: start point of transition Wh 0.0 - Bk 1.0 enpo: End point of transition Wh 0.0 - Bk 1.0 enle: K level at Black 0.0 - 1.0 shape: 1.0 = straight, 0.0-1.0 concave, 1.0-2.0 convex
-K parameters
Same as -k, but target is K locus rather than K value itself
-l tlimit
override total ink limit, 0 - 400% (default from .ti3)
-L klimit
override black ink limit, 0 - 100% (default from .ti3)
-a lxXgsmGS
Algorithm type override l = Lab cLUT (def.), x = XYZ cLUT, X = display XYZ cLUT + matrix g = gamma+matrix, s = shaper+matrix, m = matrix only, G = single gamma+matrix, S = single shaper+matrix
-u
If input profile, auto scale WP to allow extrapolation
-uc
If input profile, clip cLUT values above WP
-U scale
If input profile, scale media white point by scale
-R
Restrict white <= 1.0, black and primaries to be +ve
-V demphasis
Degree of dark region cLUT grid emphasis 1.0-4.0 (default 1.00 = none)
-f [illum]
Use Fluorescent Whitening Agent compensation [opt. simulated inst. illum.:
M0, M1, M2, A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp]
-i illum
Choose illuminant for computation of CIE XYZ from spectral data & FWA:
A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
-o observ
Choose CIE Observer for spectral data:
1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
-r avgdev
Average deviation of device+instrument readings as a percentage (default 0.50%)
-s src.icc
Apply gamut mapping to output profile perceptual B2A table for given source space
-S src.icc
Apply gamut mapping to output profile perceptual and saturation B2A table
-nP
Use colormetric source gamut to make output profile perceptual table
-nS
Use colormetric source gamut to make output profile saturation table
-g src.gam
Use source image gamut as well for output profile gamut mapping
-p absprof,...
Incorporate abstract profile(s) into output tables
-t intent
Override gamut mapping intent for output profile perceptual table:
-T intent
Override gamut mapping intent for output profile saturation table:
a - Absolute Colorimetric (in Jab) [ICC Absolute Colorimetric]
aw - Absolute Colorimetric (in Jab) with scaling to fit white point aa - Absolute Appearance
r - White Point Matched Appearance [ICC Relative Colorimetric]
la - Luminance axis matched Appearance
p - Perceptual (Preferred) (Default) [ICC Perceptual]
pa - Perceptual Apperance ms - Saturation
s - Enhanced Saturation [ICC Saturation]
al - Absolute Colorimetric (Lab) rl - White Point Matched Colorimetric (Lab)
-c viewcond
set input viewing conditions for output profile CIECAM02 gamut mapping,
either an enumerated choice, or a parameter
-d viewcond
set output viewing conditions for output profile CIECAM02 gamut mapping
either an enumerated choice, or a parameter Also sets out of gamut clipping CAM space. either an enumerated choice, or a series of parameters:value changes
pp - Practical Reflection Print (ISO-3664 P2) pe - Print evaluation environment (CIE 116-1995) pc - Critical print evaluation environment (ISO-3664 P1) mt - Monitor in typical work environment mb - Bright monitor in bright work environment md - Monitor in darkened work environment jm - Projector in dim environment jd - Projector in dark environment tv - Television/Film Studio
pcd - Photo CD - original scene outdoors
ob - Original scene - Bright Outdoors cx - Cut Sheet Transparencies on a viewing box
-P
Create gamut gammap_p.wrl and gammap_s.wrl diagostics
-O outputfile
Override the default output filename.
inoutfile
Base name for input.ti3/output.icc file