Date::Manip::Base(3) Base methods for date manipulation


use Date::Manip::Base;
$dmb = new Date::Manip::Base;


The Date::Manip package of modules consists of several modules for doing high level date operations with full error checking and a lot of flexibility.

The high level operations, though intended to be used in most situations, have a lot of overhead associated with them. As such, a number of the most useful low level routines (which the high level routines use to do much of the real work) are included in this module and are available directly to users.

These low level routines are powerful enough that they can be used independent of the high level routines and perform useful (though much simpler) operations. They are also significantly faster than the high level routines.

These routines do NO error checking on input. Invalid data will result in meaningless results. If you need error checking, you must call the higher level Date::Manip routines instead of these.

These routines also ignore all effects of time zones and daylight saving time. One way to think of these routines is working with times and dates in the GMT time zone.


This class inherits several base methods from the Date::Manip::Obj class. Please refer to the documentation for that class for a description of those methods.
Please refer to the Date::Manip::Obj documentation for these methods.

This will set the value of any configuration variable. Please refer to the Date::Manip::Config manual for a list of all configuration variables and their description.


In all of the following methods, the following variables are used:
This is a list reference containing a full date and time:

   [$y, $m, $d, $h, $mn, $s]
A list reference containing only the date portion:

   [$y, $m, $d]
A list reference containing only the time portion:

   [$h, $mn, $s]
A list reference containing an amount of time:

   [$dh, $dmn, $ds]
A list containing a full delta:

   [$dy, $dm, $dw, $dd, $dh, $dmn, $ds]
A list containing a time zone expressed as an offset:

   [ $offh, $offm, $offs ]

In all of the above, the elements "($y, $m, $d, $h, $mn, $s)" are all numeric. In most of the routines described below, no error checking is done on the input. $y should be between 1 and 9999, $m between 1 and 12, $d between 1 and 31, $h should be between 0 and 23, $mn and $s between 0 and 59.

$hms can be between 00:00:00 and 24:00:00, but an $offset must be between -23:59:59 and +23:59:59.

Years are not translated to 4 digit years, so passing in a year of ``04'' will be equivalent to ``0004'', NOT ``2004''.

The elements "($dy, $dm, $dw, $dd, $dh, $dmn, $ds)" are all numeric, but can be positive or negative. They represent an elapsed amount of time measured in years, months, weeks, etc.

Since no error checking is done, passing in "($y,$m,$d) = (2004,2,31)" will NOT trigger an error, even though February does not have 31 days. Instead, some meaningless result will be returned.

These are all routines for doing simple date and time calculations. As mentioned above, they ignore all affects of time zones and daylight saving time.

The following methods are available:

   $time = $dmb->calc_date_date($date1,$date2);

This take two dates and determine the amount of time between them.

   $date = $dmb->calc_date_days($date,$n [,$subtract]);
   $ymd  = $dmb->calc_date_days($ymd,$n [,$subtract]);

This returns a date $n days later (if "$n>0") or earlier (if "$n<0") than the date passed in. If $subtract is passed in, the sign of $n is reversed.

   $date = $dmb->calc_date_delta($date,$delta [,$subtract]);

This take a date and add the given delta to it (or subtract the delta if $subtract is non-zero).

   $date = $dmb->calc_date_time($date,$time [,$subtract]);

This take a date and add the given time to it (or subtract the time if $subtract is non-zero).

   $time = $dmb->calc_time_time(@time1,@time2 [,$subtract]);

This take two times and add them together (or subtract the second from the first if $subtract is non-zero).

   $valid = $dmb->check($date);
   $valid = $dmb->check_time($hms);

This tests a list of values to see if they form a valid date or time ignoring all time zone affects. The date/time would be valid in GMT, but perhaps not in all time zones.

1 is returned if the the fields are valid, 0 otherwise.

$hms is in the range 00:00:00 to 24:00:00.

   $flag = $dmb->cmp($date1,$date2);

Returns -1, 0, or 1 if date1 is before, the same as, or after date2.

   $day = $dmb->day_of_week($date);
   $day = $dmb->day_of_week($ymd);

Returns the day of the week (1 for Monday, 7 for Sunday).

   $day = $dmb->day_of_year($ymd);
   $day = $dmb->day_of_year($date);

In the first case, returns the day of the year (1 to 366) for "($y, $m, $d)". In the second case, it returns a fractional day (1.0 <= $day < 366.0 or 1.0 <= $day < 367.0 for a leap-year). For example, day 1.5 falls on Jan 1, at noon. The somewhat non-intuitive answer (1.5 instead of 0.5) is to make the two forms return numerically equivalent answers for times of 00:00:00 . You can look at the integer part of the number as being the day of the year, and the fractional part of the number as the fraction of the day that has passed at the given time.

The inverse operations can also be done:

   $ymd   = $dmb->day_of_year($y,$day);
   $date  = $dmb->day_of_year($y,$day);

If $day is an integer, the year, month, and day is returned. If $day is a floating point number, it returns the year, month, day, hour, minutes, and decimal seconds.

$day must be greater than or equal to 1 and less than 366 on non-leap years or 367 on leap years.

   $days = $dmb->days_in_month($y,$m);

Returns the number of days in the month.

   @days = $dmb->days_in_month($y,0);

Returns a list of 12 elements with the days in each month of the year.

   $days = $dmb->days_in_year($y);

Returns the number of days in the year (365 or 366)

   $days = $dmb->days_since_1BC($date);
   $days = $dmb->days_since_1BC($ymd);

Returns the number of days since Dec 31, 1BC. Since the calendar has changed a number of times, the number returned is based on the current calendar projected backwards in time, and in no way reflects a true number of days since then. As such, the result is largely meaningless, except when called twice as a means of determining the number of days separating two dates.

The inverse operation is also available:

   $ymd = $dmb->days_since_1BC($days);

Returns the date $days since Dec 31, 1BC. So day 1 is Jan 1, 0001.

   $flag = $dmb->leapyear($y);

Returns 1 if the argument is a leap year. Originally copied from code written by David Muir Sharnoff.

   $ymd = $dmb->nth_day_of_week($y,$n,$dow);

Returns the $nth occurrence of $dow (1 for Monday, 7 for Sunday) in the year. $n must be between 1 and 53 or -1 through -53.

   $ymd = $dmb->nth_day_of_week($y,$n,$dow,$m);

Returns the $nth occurrence of $dow in the given month. $n must be between 1 and 5 or it can be -1 through -5.

In all cases, nothing is returned if $n is beyond the last actual result (i.e. the 5th Sunday in a month with only four Sundays).

   $secs = $dmb->secs_since_1970($date);

Returns the number of seconds since Jan 1, 1970 00:00:00 (negative if date is earlier).

   $date = $dmb->secs_since_1970($secs);

Translates number of seconds into a date.

The split and join functions are used to take a string containing a common type of time data and split it into a list of fields. The join function takes the list and forms it into a string.

Rudimentary error checking is performed with both of these functions and undef is returned in the case of any error. No error checking is done on the specific values.

The following are allowed:

   $date = $dmb->split("date",$string);
   $string = $dmb->join("date",$date);

This splits a string containing a date or creates one from a list reference. The string split must be of one of the forms:


The string formed by join is one of the above, depending on the value of the Printable config variable. The default format is YYYYMMDDHH:MN:SS, but if Printable is set to 1, YYYYMMDDHHMNSS is produced, and if Printable is set to 2, the YYYY-MM-DD-HH:MN:SS form is produced.

   $hms = $dmb->split("hms",$string);
   $string = $dmb->join("hms",$hms);

This works with the hours, minutes, and seconds portion of a date.

When splitting a string, the string can be of any of the forms:


Here, H is a 1 or 2 digit representation of the hours. All other fields are two digit representations.

The string formed by the join function will always be of the form HH:MN:SS.

The time must be between 00:00:00 and 24:00:00.

   $offset = $dmb->split("offset",$string);
   $string = $dmb->join("offset",$offset);

An offset string should have a sign (though it is optional if it is positive) and is any of the forms:


Here, H is a 1 or 2 digit representation of the hours. All other fields are two digit representations.

The string formed by the join function will always be of the form +HH:MN:SS.

The offset must be between -23:59:59 and +23:59:59 .

   $time = $dmb->split("time",$string [,$no_normalize]);
   $string = $dmb->join("time",$time [,$no_normalize]);

This works with an amount of time in hours, minutes, and seconds. The string is of the format:


where all signs are optional. The returned value (whether a list reference from the split function, or a string from the join function) will have all fields normalized unless $no_normalize is passed in.

   $delta = $dmb->split("delta",$string [,$no_normalize]);
   $delta = $dmb->split("business",$string [,$no_normalize]);
   $string = $dmb->join("delta",$delta [,$no_normalize]);
   $string = $dmb->join("business",$delta [,$no_normalize]);

Both of these split a string containing a delta, or create a string containing one. The difference is whether the delta is treated as a business or non-business delta (see Date::Manip::Delta documentation for a detailed description).

The string that can be split is of the form:


All signs are optional in the string being split. The string produced is of the form +Y:M:+W:D:H:MN:S (for a non-business delta) or +Y:M:+W:+D:H:MN:S (for a business delta).

Fields may be omitted entirely. For example:


are both valid.

The string or list output is normalized unless $no_normalize is passed in.

   $ymd = $dmb->week1_day1($y);

This returns the date of the 1st day of the 1st week in the given year. Note that this uses the ISO 8601 definition of week, so the year returned may be the year before the one passed in.

This uses the FirstDay and Jan1Week1 config variables to evaluate the results.

   $w = $dmb->weeks_in_year($y);

This returns the number of ISO 8601 weeks in the year. It will always be 52 or 53.

   ($y,$w) = $dmb->week_of_year($date);
   ($y,$w) = $dmb->week_of_year($ymd);

This returns the week number (1-53) of the given date and the year that it falls in. Since the ISO 8601 definition of a week is used, the year returned is not necessarily the one passed in (it may differ for the first or last week of the year).

The inverse operation is also available:

   $ymd = $dmb->week_of_year($y,$w);

which returns the first day of the given week.

This uses the FirstDay and Jan1Week1 config variables to evaluate the results.


None known.


Please refer to the Date::Manip::Problems documentation for information on submitting bug reports or questions to the author.


This script is free software; you can redistribute it and/or modify it under the same terms as Perl itself.


Sullivan Beck ([email protected])