DESCRIPTIONdmidecode is a tool for dumping a computer's DMI (some say SMBIOS) table contents in a human-readable format. This table contains a description of the system's hardware components, as well as other useful pieces of information such as serial numbers and BIOS revision. Thanks to this table, you can retrieve this information without having to probe for the actual hardware. While this is a good point in terms of report speed and safeness, this also makes the presented information possibly unreliable.
The DMI table doesn't only describe what the system is currently made of, it also can report the possible evolutions (such as the fastest supported CPU or the maximal amount of memory supported).
SMBIOS stands for System Management BIOS, while DMI stands for Desktop Management Interface. Both standards are tightly related and developed by the DMTF (Desktop Management Task Force).
As you run it, dmidecode will try to locate the DMI table. It will first try to read the DMI table from sysfs, and next try reading directly from memory if sysfs access failed. If dmidecode succeeds in locating a valid DMI table, it will then parse this table and display a list of records like this one:
Handle 0x0002, DMI type 2, 8 bytes.
Base Board Information
Product Name: C440GX+
Serial Number: INCY92700942
Each record has:
- A handle. This is a unique identifier, which allows records to reference each other. For example, processor records usually reference cache memory records using their handles.
- A type. The SMBIOS specification defines different types of elements a computer can be made of. In this example, the type is 2, which means that the record contains "Base Board Information".
- A size. Each record has a 4-byte header (2 for the handle, 1 for the type, 1 for the size), the rest is used by the record data. This value doesn't take text strings into account (these are placed at the end of the record), so the actual length of the record may be (and is often) greater than the displayed value.
Decoded values. The information presented of course depends on the type
of record. Here, we learn about the board's manufacturer, model, version
and serial number.
- -d, --dev-mem FILE
- Read memory from device FILE (default: /dev/mem)
- -q, --quiet
- Be less verbose. Unknown, inactive and OEM-specific entries are not displayed. Meta-data and handle references are hidden.
- -s, --string KEYWORD
Only display the value of the DMI string identified by KEYWORD.
KEYWORD must be a keyword from the following list: bios-vendor,
Each keyword corresponds to a given DMI type and a given offset
within this entry type.
Not all strings may be meaningful or even defined on all systems. Some
keywords may return more than one result on some systems (e.g.
processor-version on a multi-processor system).
If KEYWORD is not provided or not valid, a list of all valid
keywords is printed and
exits with an error.
This option cannot be used more than once.
Note: on Linux, most of these strings can alternatively be read directly from sysfs, typically from files under /sys/devices/virtual/dmi/id. Most of these files are even readable by regular users.
- -t, --type TYPE
- Only display the entries of type TYPE. TYPE can be either a DMI type number, or a comma-separated list of type numbers, or a keyword from the following list: bios, system, baseboard, chassis, processor, memory, cache, connector, slot. Refer to the DMI TYPES section below for details. If this option is used more than once, the set of displayed entries will be the union of all the given types. If TYPE is not provided or not valid, a list of all valid keywords is printed and dmidecode exits with an error.
- -u, --dump
- Do not decode the entries, dump their contents as hexadecimal instead. Note that this is still a text output, no binary data will be thrown upon you. The strings attached to each entry are displayed as both hexadecimal and ASCII. This option is mainly useful for debugging.
- --dump-bin FILE
- Do not decode the entries, instead dump the DMI data to a file in binary form. The generated file is suitable to pass to --from-dump later.
- --from-dump FILE
- Read the DMI data from a binary file previously generated using --dump-bin.
- Do not attempt to read DMI data from sysfs files. This is mainly useful for debugging.
- -h, --help
- Display usage information and exit
- -V, --version
- Display the version and exit
Options --string, --type and --dump-bin determine the output format and are mutually exclusive.
Please note in case of dmidecode is run on a system with BIOS that boasts new SMBIOS specification, which is not supported by the tool yet, it will print out relevant message in addition to requested data on the very top of the output. Thus informs the output data is not reliable.
DMI TYPESThe SMBIOS specification defines the following DMI types:
|10||On Board Devices|
|12||System Configuration Options|
|15||System Event Log|
|16||Physical Memory Array|
|18||32-bit Memory Error|
|19||Memory Array Mapped Address|
|20||Memory Device Mapped Address|
|21||Built-in Pointing Device|
|25||System Power Controls|
|29||Electrical Current Probe|
|30||Out-of-band Remote Access|
|31||Boot Integrity Services|
|33||64-bit Memory Error|
|35||Management Device Component|
|36||Management Device Threshold Data|
|41||Onboard Devices Extended Information|
|42||Management Controller Host Interface|
Additionally, type 126 is used for disabled entries and type 127 is an end-of-table marker. Types 128 to 255 are for OEM-specific data. dmidecode will display these entries by default, but it can only decode them when the vendors have contributed documentation or code for them.
Keywords can be used instead of type numbers with --type. Each keyword is equivalent to a list of type numbers:
|system||1, 12, 15, 23, 32|
|baseboard||2, 10, 41|
|memory||5, 6, 16, 17|
Keywords are matched case-insensitively. The following command lines are equivalent:
- dmidecode --type 0 --type 13
- dmidecode --type 0,13
- dmidecode --type bios
dmidecode --type BIOS
BINARY DUMP FILE FORMATThe binary dump files generated by --dump-bin and read using --from-dump are formatted as follows:
- The SMBIOS or DMI entry point is located at offset 0x00. It is crafted to hard-code the table address at offset 0x20.
The DMI table is located at offset 0x20.