DESCRIPTION
fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream.
fence_ilo accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.hp.com
PARAMETERS
- -u, --ipport=[port]
-
TCP/UDP port to use for connection with device (Default Value: 443)
- -6, --inet6-only
-
Forces agent to use IPv6 addresses only
- -p, --password=[password]
-
Login password or passphrase
- -a, --ip=[ip]
-
IP Address or Hostname This parameter is always required.
- -z, --ssl
-
SSL connection (Default Value: 1)
- -r, --ribcl-version=[version]
-
Force ribcl version to use
- -4, --inet4-only
-
Forces agent to use IPv4 addresses only
- -l, --username=[name]
-
Login Name This parameter is always required.
- -o, --action=[action]
-
Fencing Action (Default Value: reboot)
- -S, --password-script=[script]
-
Script to retrieve password
- -v, --verbose
-
Verbose mode
- -D, --debug-file=[debugfile]
-
Write debug information to given file
- -V, --version
-
Display version information and exit
- -h, --help
-
Display help and exit
- --shell-timeout=[seconds]
-
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --login-timeout=[seconds]
-
Wait X seconds for cmd prompt after login (Default Value: 10)
- --power-timeout=[seconds]
-
Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
-
Wait X seconds after issuing ON/OFF (Default Value: 0)
- --delay=[seconds]
-
Wait X seconds before fencing is started (Default Value: 0)
- --retry-on=[attempts]
-
Count of attempts to retry power on (Default Value: 3)
ACTIONS
- on
-
Power on machine.
- off
-
Power off machine.
- reboot
-
Reboot machine.
- status
-
This returns the status of the plug/virtual machine.
- list
-
List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
- monitor
-
Check the health of fence device
- metadata
-
Display the XML metadata describing this resource.
STDIN PARAMETERS
- ipport
-
TCP/UDP port to use for connection with device (Default Value: 443)
- inet6_only
-
Forces agent to use IPv6 addresses only
- passwd
-
Login password or passphrase
- ipaddr
-
IP Address or Hostname This parameter is always required.
- ssl
-
SSL connection (Default Value: 1)
- ribcl
-
Force ribcl version to use
- inet4_only
-
Forces agent to use IPv4 addresses only
- login
-
Login Name This parameter is always required.
- action
-
Fencing Action (Default Value: reboot)
- passwd_script
-
Script to retrieve password
- verbose
-
Verbose mode
- debug
-
Write debug information to given file
- version
-
Display version information and exit
- help
-
Display help and exit
- shell_timeout
-
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- login_timeout
-
Wait X seconds for cmd prompt after login (Default Value: 10)
- power_timeout
-
Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
-
Wait X seconds after issuing ON/OFF (Default Value: 0)
- delay
-
Wait X seconds before fencing is started (Default Value: 0)
- retry_on
-
Count of attempts to retry power on (Default Value: 3)