fence_rsb(8) I/O Fencing agent for Fujitsu-Siemens RSB

DESCRIPTION

fence_rsb is an I/O Fencing agent which can be used with the Fujitsu-Siemens RSB management interface. It logs into device via telnet/ssh and reboots a specified outlet. Lengthy telnet/ssh connections should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions.

fence_rsb accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_rsb can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.fujitsu.com

PARAMETERS

        

-o, --action=[action]
Fencing action (Default Value: reboot)         
-c, --command-prompt=[prompt]
Force Python regex for command prompt (Default Value: ['to quit:'])         
-k, --identity-file=[filename]
Identity file (private key) for SSH         
-4, --inet4-only
Forces agent to use IPv4 addresses only         
-6, --inet6-only
Forces agent to use IPv6 addresses only         
-a, --ip=[ip]
IP address or hostname of fencing device         
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 3172)         
-l, --username=[name]
Login name This parameter is always required.         
-p, --password=[password]
Login password or passphrase         
-S, --password-script=[script]
Script to run to retrieve password         
-n, --plug=[ip]
IP address or hostname of fencing device (together with --port-as-ip)         
-x, --ssh
Use SSH connection         
--ssh-options=[options]
SSH options to use         
-v, --verbose
Verbose mode         
-D, --debug-file=[debugfile]
Write debug information to given file         
-V, --version
Display version information and exit         
-h, --help
Display help and exit         
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)         
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)         
--port-as-ip
Make "port/plug" to be an alias to IP address         
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)         
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)         
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)         
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)         
--ssh-path=[path]
Path to ssh binary (Default Value: /usr/bin/ssh)         
--telnet-path=[path]
Path to telnet binary (Default Value: /usr/bin/telnet)

ACTIONS

        

on
Power on machine.         
off
Power off machine.         
reboot
Reboot machine.         
status
This returns the status of the plug/virtual machine.         
monitor
Check the health of fence device         
metadata
Display the XML metadata describing this resource.         
validate-all
Validate if all required parameters are entered.

STDIN PARAMETERS

        

action
Fencing action (Default Value: reboot)         
cmd_prompt
Force Python regex for command prompt (Default Value: ['to quit:'])         
identity_file
Identity file (private key) for SSH         
inet4_only
Forces agent to use IPv4 addresses only         
inet6_only
Forces agent to use IPv6 addresses only         
ipaddr
IP address or hostname of fencing device         
ipport
TCP/UDP port to use for connection with device (Default Value: 3172)         
login
Login name This parameter is always required.         
passwd
Login password or passphrase         
passwd_script
Script to run to retrieve password         
port
IP address or hostname of fencing device (together with --port-as-ip)         
secure
Use SSH connection         
ssh_options
SSH options to use         
verbose
Verbose mode         
debug
Write debug information to given file         
version
Display version information and exit         
help
Display help and exit         
delay
Wait X seconds before fencing is started (Default Value: 0)         
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)         
port_as_ip
Make "port/plug" to be an alias to IP address         
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)         
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)         
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)         
retry_on
Count of attempts to retry power on (Default Value: 1)         
ssh_path
Path to ssh binary (Default Value: /usr/bin/ssh)         
telnet_path
Path to telnet binary (Default Value: /usr/bin/telnet)

LAST SEARCHED