SYNOPSIS

esorex giwavecalibration [OPTIONS] FILE.sof

DESCRIPTION

For detailed information please refer to the GIRAFFE pipeline user manual.

It is available at http://www.eso.org/pipelines.

OPTIONS

--remove-bias <bool>

Enable bias removal (bool; default: True). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.remove [default = True].

--bsremove-method <str>

Bias removal method (str; default: 'PROFILE'). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.method [default = PROFILE].

--bsremove-areas <str>

Bias areas to use (Xl0:Xr0:Yl0:Yr0, ... ,Xln:Xrn:Yln:Yrn) (str; default: '5:40:0:4095'). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.areas [default = 5:40:0:4095].

--bsremove-sigma <float>

Sigma Clipping: sigma threshold factor (float; default: 2.5). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.sigma [default = 2.5].

--bsremove-niter <long>

Sigma Clipping: maximum number of iterations (long; default: 5). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.iterations [default = 5].

--bsremove-mfrac <float>

Sigma Clipping: minimum fraction of points accepted/total [0.0..1.0] (float; default: 0.8). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.fraction [default = 0.8].

--bsremove-xorder <long>

Order of X polynomial fit (CURVE method only) (long; default: 1). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.xorder [default = 1].

--bsremove-yorder <long>

Order of Y polynomial fit (CURVE method only) (long; default: 1). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.yorder [default = 1].

--bsremove-xstep <long>

Sampling step along X (CURVE method only) (long; default: 1). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.xstep [default = 1].

--bsremove-ystep <long>

Sampling step along Y (CURVE method only) (long; default: 1). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.ystep [default = 1].

--extr-method <str>

Extraction method: 'SUM', 'HORNE' or 'OPTIMAL' (str; default: 'SUM'). The full name of this option for the EsoRex configuration file is giraffe.extraction.method [default = SUM].

--extr-ron <float>

New bias sigma (RON) value for bias and dark corrected image (float; default: -1.0). The full name of this option for the EsoRex configuration file is giraffe.extraction.ron [default = -1.0].

--extr-psfmodel <str>

PSF profile model: `psfexp', `psfexp2' (str; default: 'psfexp2'). The full name of this option for the EsoRex configuration file is giraffe.extraction.psf.model [default = psfexp2].

--extr-psfsigma <float>

Sigma clippging threshold used for rejecting data points during PSF fitting (Horne's sigma). It is used to reject bad pixels and cosmics. (float; default: 7.0). The full name of this option for the EsoRex configuration file is giraffe.extraction.psf.sigma [default = 7.0].

--extr-psfniter <long>

Maximum number of iterations used for fitting the PSF profile. (long; default: 2). The full name of this option for the EsoRex configuration file is giraffe.extraction.psf.iterations [default = 2].

--extr-hewidth <long>

Horne extraction method: Number of extra pixels added to the fiber half-width. (long; default: 2). The full name of this option for the EsoRex configuration file is giraffe.extraction.horne.extrawidth [default = 2].

--extr-hmingood <long>

Horne extraction method: Minimum number of points used for the profile fit. It sets the lower limit of data points for the pixel rejection. (long; default: 3). The full name of this option for the EsoRex configuration file is giraffe.extraction.horne.mingood [default = 3].

--extr-omfrac <float>

Optimal extraction method: Minimum fraction of the data points used for fitting the fiber profiles. It sets the lower limit for the pixel rejection. (float; default: 0.9). The full name of this option for the EsoRex configuration file is giraffe.extraction.optimal.fraction [default = 0.9].

--extr-owfactor <float>

Optimal extraction method: Factor by which the fiber PSF half width is multiplied. Adjacent spectra within this area are assumed to affect the spectrum being extracted. (float; default: 3.0). The full name of this option for the EsoRex configuration file is giraffe.extraction.optimal.wfactor [default = 3.0].

--extr-obkgorder <long>

Optimal extraction method: Order of the polynomial background model, which is fitted for each wavelength bin along the spatial direction. (long; default: 2). The full name of this option for the EsoRex configuration file is giraffe.extraction.optimal.bkgorder [default = 2].

--wcal-lswidth <str>

List of window widths [pxl] used for line detection and fit (e.g. '60,40,15'). (str; default: '10,10,10,10,10'). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.widths [default = 10,10,10,10,10].

--wcal-lssep <float>

Factor used to compute the minimum line separation from the window width. (float; default: 0.9). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.separation [default = 0.9].

--wcal-lsfxratio <float>

Selects only lines whose neighbours have a relative intensity less than 1. / fluxratio. (float; default: 50.0). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.fluxratio [default = 50.0].

--wcal-lsbright <float>

Selects lines having an intensity greater or equal to the given intensity. (float; default: 0.0). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.brightness [default = 0.0].

--wcal-lscount <long>

Sets the minimum number of lines to select; selected are lines with the highest nominal intensity. A value of 0 turns this selection off. If the value is less than 0 the selection is skipped if the line list does not contain enough lines. (long; default: -80). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.count [default = -80].

--wcal-lswrange <str>

Selects only lines within the given wavelength range [nm]. (str; default: '0.,0.'). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.wrange [default = 0.,0.].

--wcal-lfmodel <str>

Line profile model. (str; default: 'psfexp'). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.model [default = psfexp].

--wcal-lfres <str>

Use optical model residuals for line detection. (str; default: 'auto'). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.residuals [default = auto].

--wcal-lfthreshold <float>

Line detection threshold during the line fitting (multiple of bias sigma) (float; default: 1.0). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.threshold [default = 1.0].

--wcal-lfoffset <float>

Maximum allowed difference between the fitted and raw line peak position. (float; default: 10.0). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.offset [default = 10.0].

--wcal-lfniter <long>

Line detection fit maximum number of iterations. (long; default: 50). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.iterations [default = 50].

--wcal-lfntest <long>

Line detection fit maximum number of tests. (long; default: 7). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.tests [default = 7].

--wcal-lfdchisq <float>

Line detection fit minimum chi-square difference. (float; default: 0.0001). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.dchisquare [default = 0.0001].

--wcal-lfreswid <float>

Line width/resolution width factor. (float; default: 0.5). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.rwidthratio [default = 0.5].

--wcal-lfexpwid <float>

Exponential line profile exponent; it will not be fitted if it is larger than 0. (float; default: -3.0). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.line.exponent [default = -3.0].

--wcal-soffset <str>

Initial slit position offsets along the x and y direction and rotation angle. (str; default: 'setup'). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.slit.offset [default = setup].

--wcal-ommodel <str>

Optical model. (str; default: 'xoptmod2'). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.opt.model [default = xoptmod2].

--wcal-omdir <long>

Dispersion direction flag. (long; default: 1). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.opt.direction [default = 1].

--wcal-omsol <bool>

Controls optical model parameter fitting. (bool; default: True). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.opt.solution [default = True].

--wcal-omflags <str>

List of flags defining the set of free parameters used for fitting the optical model. Possible values are: fcoll, gcam, theta, sdx, sdy, sphi (str; default: 'sdx,sdy,sphi'). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.opt.flags [default = sdx,sdy,sphi].

--wcal-omsslits <bool>

Controls subslit geometry usage in the optical model fit; subslits are used if set to `true'. (bool; default: False). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.opt.subslits [default = False].

--wcal-omniter <long>

Optical model fit maximum number of iterations. (long; default: 50). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.opt.iterations [default = 50].

--wcal-omntest <long>

Optical model fit maximum number of tests (long; default: 7). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.opt.tests [default = 7].

--wcal-omdchisq <float>

Optical model fit minimum chi-square difference. (float; default: 0.0001). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.opt.dchisquare [default = 0.0001].

--wcal-xwsigma <float>

PSF width fit sigma clipping factor. (float; default: 1.25). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.psf.sigma [default = 1.25].

--wcal-xwniter <long>

PSF width fit sigma clipping maximum number of iterations. (long; default: 10). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.psf.iterations [default = 10].

--wcal-xwmfrac <float>

PSF width fit sigma clipping minimum fraction of points accepted/total. (float; default: 0.9). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.psf.fraction [default = 0.9].

--wcal-xworder <str>

X and Y polynomial orders for PSF x-width Chebyshev fit. (str; default: '2,2'). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.psf.order [default = 2,2].

--wcal-wssigma <float>

Chebyshev correction sigma clipping factor. (float; default: 150.0). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.wsol.sigma [default = 150.0].

--wcal-wsniter <long>

Chebyshev correction sigma clipping maximum number of iterations (long; default: 10). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.wsol.iterations [default = 10].

--wcal-wsmfrac <float>

Chebyshev correction sigma clipping minimum fraction of points accepted/total. (float; default: 0.9). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.wsol.fraction [default = 0.9].

--wcal-wsorder <str>

X and Y polynomial orders for the wavelength solution Chebyshev correction. (str; default: '6,4'). The full name of this option for the EsoRex configuration file is giraffe.wlcalibration.wsol.order [default = 6,4].

--wcal-rebin <bool>

Rebin extracted arc-lamp spectra. (bool; default: True). The full name of this option for the EsoRex configuration file is giraffe.wcal.rebin [default = True].

--rbin-method <str>

Method to use : `linear' or `spline' (str; default: 'linear'). The full name of this option for the EsoRex configuration file is giraffe.rebinning.method [default = linear].

--rbin-xresid <bool>

Use x residuals during rebinning? `true'/`false' (bool; default: True). The full name of this option for the EsoRex configuration file is giraffe.rebinning.xresiduals [default = True].

--rbin-lstep <float>

Lambda step size, only used if scaling method is 'linear' (float; default: 0.005). The full name of this option for the EsoRex configuration file is giraffe.rebinning.lstep [default = 0.005].

--rbin-scmethod <str>

Scaling method: `log' or `linear' (str; default: 'linear'). The full name of this option for the EsoRex configuration file is giraffe.rebinning.scalemethod [default = linear].

--rbin-size <long>

Size of output rebinned spectra, 0 means calculate size based on wavelength range and lambda stepsize (long; default: 0). The full name of this option for the EsoRex configuration file is giraffe.rebinning.size [default = 0].

--rbin-range <str>

Rebinning range: `setup' or `common' (str; default: 'setup'). The full name of this option for the EsoRex configuration file is giraffe.rebinning.range [default = setup].

--wcal-slit <bool>

Controls the slit geometry calibration. (bool; default: False). The full name of this option for the EsoRex configuration file is giraffe.wcal.slitgeometry [default = False].

--scal-cniter <long>

Slit geometry calibration maximum number of iterations. (long; default: 1). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.iterations [default = 1].

--scal-zmax <float>

Maximum allowed pixel value. To be effective it must be larger than 0. (float; default: 10000.0). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.zmax [default = 10000.0].

--scal-cstep <float>

Cross-correlation step. (float; default: -0.005). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.cc.step [default = -0.005].

--scal-cdomain <str>

Restricts the cross-correlation to the given domain. (str; default: '0.,0.'). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.cc.domain [default = 0.,0.].

--scal-rvlimits <str>

Delta RV limits of the cross-correlation window in km/s. (str; default: '-200.,200.'). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.rv.limits [default = -200.,200.].

--scal-rvniter <long>

Maximum number of iterations used for the RV determination. (long; default: 3). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.rv.iterations [default = 3].

--scal-rvwfactor <float>

Data window width factor. The FWHM times this value determines the window width. (float; default: 1.5). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.rv.wfactor [default = 1.5].

--scal-pfniter <long>

Peak model fit maximum number of iterations. (long; default: 50). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.peak.iterations [default = 50].

--scal-pfntest <long>

Cross-correlation peak fit maximum number of tests (long; default: 7). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.peak.tests [default = 7].

--scal-pfdchisq <float>

Cross-correlation peak fit minimum chi-square difference. (float; default: 0.0001). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.peak.dchisquare [default = 0.0001].

Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.

VERSION

giwavecalibration 2.14.3

AUTHOR

Giraffe Pipeline <[email protected]>

LICENSE

 This file is part of the GIRAFFE Instrument Pipeline
 Copyright (C) 2002-2014 European Southern Observatory

 This program is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation; either version 2 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
 Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA