DESCRIPTION

specifies options to be passed to the gpm daemon at start time. It is parsed by the init script, rather than by gpm itself. It comprises variable assignments in Bourne shell syntax: variable=value (with no extra spaces; to embed spaces or other shell metacharacters in values, use quotes as in shell scripting). Blank lines and lines beginning with a hash ("#") are ignored.

Settings are implemented by setting flags on the gpm command line; these are documented in gpm(8). The following variable names are specified:

device

Specifies the device file for your primary mouse. This sets -m

type

Specifies the protocol for your primary mouse. This sets -t

device2, type2

The same as device and type but for your secondary mouse. These set -m and -t after passing -M If either of these are defined, both must be.

responsiveness

Specifies the responsiveness for your primary mouse. This sets -r

sample_rate

Specifies the sample rate for your primary mouse. This sets -s

repeat_type

Enables the gpm repeater and sets the repeater protocol, using the -R flag. Repeat type none or an empty value will disable the repeater.

append

Any options specified here are appended to the gpm command line. If you use multiple options, you will need to enclose the value in quotes ("").

EXAMPLES

A simple file for a PS/2 mouse whose protocol should be autodetected, and which should be repeated in /dev/gpmdata as a serial Microsoft Intellimouse:

# Sample gpm.conf
device=/dev/psaux
type=autops2
repeat_type=ms3

This will cause the daemon to be started as gpm -m /dev/psaux -t autops2 -Rms3

FILES