man ipmiutil_delloem (8): OEM commands for Dell servers

SYNOPSIS

ipmiutil delloem [-mx -NPRUEFJTVY] commands

DESCRIPTION

ipmiutil delloem commands is a program that uses Dell OEM IPMI commands to perform platform-specific functions.

OPTIONS

-m 002000: Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00). This could be used for PICMG or ATCA blade systems. The trailing character, if present, indicates SMI addressing if 's', or IPMB addressing if 'i' or not present.
-x: Causes extra debug messages to be displayed.
-N nodename: Nodename or IP address of the remote target system. If a nodename is specified, IPMI LAN interface is used. Otherwise the local system management interface is used.
-P/-R rmt_pswd: Remote password for the nodename given. The default is a null password.
-U rmt_user: Remote username for the nodename given. The default is a null username.
-E: Use the remote password from Environment variable IPMI_PASSWORD.
-F drv_t: Force the driver type to one of the followng: imb, va, open, gnu, landesk, lan, lan2, lan2i, kcs, smb. Note that lan2i means lan2 with intelplus. The default is to detect any available driver type and use it.
-J: Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none, 1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, 5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40. Default is 3.
-T: Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.
-V: Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level, 3=Operator level, 4=Administrator level (default), 5=OEM level.
-Y: Yes, do prompt the user for the IPMI LAN remote password. Alternatives for the password are -E or -P.

COMMANDS

mac list

: Lists the MAC address of LOMs

mac get <NIC number>

: Shows the MAC address of specified LOM. 0-7 System LOM, 8- DRAC/iDRAC.

lan set <Mode>

: Sets the NIC Selection Mode (dedicated, shared,
shared with failover lom2, shared with Failover all loms).

lan get

: Returns the current NIC Selection Mode (dedicated, shared,
shared with failover lom2, shared with Failover all loms).

lan get active

: Returns the current active NIC (dedicated, LOM1, LOM2, LOM3, LOM4).

powermonitor

: Shows power tracking statistics

powermonitor clear cumulativepower

: Reset cumulative power reading

powermonitor clear peakpower

: Reset peak power reading

powermonitor powerconsumption

: Displays power consumption in <watt|btuphr>

powermonitor powerconsumptionhistory <watt|btuphr>

: Displays power consumption history

powermonitor getpowerbudget

: Displays power cap in <watt|btuphr>

powermonitor setpowerbudget <val> <watt|btuphr|percent>

: Allows user to set the power cap in <watt|BTU/hr|percentage>

powermonitor enablepowercap

: To enable set power cap

powermonitor disablepowercap

: To disable set power cap

windbg start

: Starts the windbg session (Cold Reset & SOL Activation)

windbg end

: Ends the windbg session (SOL Deactivation)

vFlash info Card

: Shows Extended SD Card information

WARNINGS

See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.

COPYRIGHT

See the file COPYING in the distribution for more details regarding redistribution.

This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.

AUTHOR

Andy Cress <arcress at users.sourceforge.net>