miniasm(1) de novo assembler for long read sequences

SYNOPSIS

miniasm [-b12V] [-m minMatch] [-i minIden] [-s minSpan] [-c minCov] [-o minOvlp] [-h maxHang] [-I intThres] [-g maxGapDiff] [-d maxBubDist] [-e minUtgSize] [-f readFile] [-n nRounds] [-r dropRatio] [-F finalDropRatio] [-p outputInfo] mapping.paf > output.gfa

DESCRIPTION

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings in the PAF format as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

OPTIONS

Preselection options

-m INT
Drop mappings having less than INT matching bases (col10 in PAF) [100]. This option has the same role as -L of minimap.

-s INT
Drop mappings shorter than INT-bp [1000]. This option also affects the second round of read filtering and minimal overlap length.

-i FLOAT
During read filtering, ignore mappings with col10/col11 below FLOAT [0.05]. Ignored mappings are still used for read overlaps.

-c INT
Minimal coverage by other reads [3]. In the first round of filtering, miniasm finds the longest region covered by INT or more reads. In the second round, it in addition requires each remaining base to be covered by INT bases at least minSpan/2 from the ends of other reads.

Overlapping options

-o INT
Minimal overlap length [same as minSpan]

-h INT
Maximum overhang length [1000]. An overhang is an unmapped region that should be mapped given a true overlap or true containment. If the overhang is too long, the mapping is considered an internal match and will be ignored.

-I FLOAT
Minimal ratio of mapping length to mapping+overhang length for a mapping considered a containment or an overlap [0.8]. This option has a similar role to -h, except that it controls the ratio, not length.

Graph layout options

-g INT
Maximal gap differences between two reads in a mapping [1000]. This parameter is only used for transitive reduction.

-d INT
Maximal probing distance for bubble popping [50000]. Bubbles longer than INT will not be popped.

-e INT
A unitig is considered small if it is composed of less than INT reads [4]. Miniasm may try to remove small unitigs at various steps.

-f FILE
Read sequence file in FASTA or FASTQ format for generating unitig sequences [null]. If this option is absent, miniasm produces a GFA output without sequences.

-r FLOAT1,[FLOAT2]
Max and min overlap drop ratio [0.7,0.5]. Let overlap(v->w) be the overlap length of edge v->w and maxovlp(v)=max_w{overlap(v->w)} be the length of largest overlap. Miniasm drops overlap v->w if overlap(v->w)/maxovlp(v) is below a threshold controled by this option. Miniasm applies nRounds rounds of short overlap removal with an increasing threshold between FLOAT1 and FLOAT2.

-n INT
Rounds of short overlap removal [3].

-F FLOAT
Overlap drop ratio threshold after short unitig removal [0.8]

Miscellaneous options

-b
Indicate that in the input, the same mapping is likely to be given twice

-1
Skip the first round of pre-assembly read selection

-2
Skip the second round of pre-assembly read selection

-p STR
Output information and format [ug]. Possible STR values include - bed: post-filtered read regions in the BED format; paf: mappings between post-filtered reads; sg: read overlap graph in the GFA format; ug: unitig graph in the GFA format.

-V
Print version number to stdout

INPUT FORMAT

Miniasm reads mapping positions in the Pairwise mApping Format (PAF), which is a TAB-delimited text format with each line consisting of at least 12 fields as are described in the following table:

ColTypeDescription

1stringQuery sequence name
2intQuery sequence length
3intQuery start coordinate (0-based)
4intQuery end coordinate (0-based)
5char`+' if query and target on the same strand; `-' if opposite
6stringTarget sequence name
7intTarget sequence length
8intTarget start coordinate on the original strand
9intTarget end coordinate on the original strand
10intNumber of matching bases in the mapping
11intNumber bases, including gaps, in the mapping
12intMapping quality (0-255 with 255 for missing)

Please see minimap(1) for the detailed description of each field.

OUTPUT FORMAT

Miniasm outputs the assembly in the Graphical Fragment Assembly format (GFA). It is a line based TAB-delimited format, with the leading letter indicates the type of the line. The following table gives the line types used by miniasm:

LineCommentFixed fields

HHeaderN/A
SSegmentsegName segSeq
LOverlapsegName1 segOri1 segName2 segOri2 ovlpCIGAR
aGolden pathutgName utgStart readName:start-end readOri length