DESCRIPTION

Percona Toolkit is a collection of advanced command-line tools used by Percona (<http://www.percona.com/>) support staff to perform a variety of MySQL and system tasks that are too difficult or complex to perform manually.

These tools are ideal alternatives to private or ``one-off'' scripts because they are professionally developed, formally tested, and fully documented. They are also fully self-contained, so installation is quick and easy and no libraries are installed.

Percona Toolkit is derived from Maatkit and Aspersa, two of the best-known toolkits for MySQL server administration. It is developed and supported by Percona. For more information and other free, open-source software developed by Percona, visit <http://www.percona.com/software/>.

TOOLS

This release of Percona Toolkit includes the following tools:

pt-align

Align output from other tools to columns.

pt-archiver

Archive rows from a MySQL table into another table or a file.

pt-config-diff

Diff MySQL configuration files and server variables.

pt-deadlock-logger

Log MySQL deadlocks.

pt-diskstats

An interactive I/O monitoring tool for GNU/Linux.

pt-duplicate-key-checker

Find duplicate indexes and foreign keys on MySQL tables.

pt-fifo-split

Split files and pipe lines to a fifo without really splitting.

pt-find

Find MySQL tables and execute actions, like GNU find.

pt-fingerprint

Convert queries into fingerprints.

pt-fk-error-logger

Log MySQL foreign key errors.

pt-heartbeat

Monitor MySQL replication delay.

pt-index-usage

Read queries from a log and analyze how they use indexes.

pt-ioprofile

Watch process IO and print a table of file and I/O activity.

pt-kill

Kill MySQL queries that match certain criteria.

pt-mext

Look at many samples of MySQL "SHOW GLOBAL STATUS" side-by-side.

pt-mysql-summary

Summarize MySQL information nicely.

pt-online-schema-change

ALTER tables without locking them.

pt-pmp

Aggregate GDB stack traces for a selected program.

pt-query-digest

Analyze MySQL queries from logs, processlist, and tcpdump.

pt-show-grants

Canonicalize and print MySQL grants so you can effectively replicate, compare and version-control them.

pt-sift

Browses files created by pt-stalk.

pt-slave-delay

Make a MySQL slave server lag behind its master.

pt-slave-find

Find and print replication hierarchy tree of MySQL slaves.

pt-slave-restart

Watch and restart MySQL replication after errors.

pt-stalk

Collect forensic data about MySQL when problems occur.

pt-summary

Summarize system information nicely.

pt-table-checksum

Verify MySQL replication integrity.

pt-table-sync

Synchronize MySQL table data efficiently.

pt-table-usage

Analyze how queries use tables.

pt-upgrade

Verify that query results are identical on different servers.

pt-variable-advisor

Analyze MySQL variables and advise on possible problems.

pt-visual-explain

Format EXPLAIN output as a tree.

For more free, open-source software developed Percona, visit <http://www.percona.com/software/>.

SPECIAL OPTION TYPES

Tool options use standard types ("int", "string", etc.) as well as these special types:

time

Time values are seconds by default. For example, "--run-time 60" means 60 seconds. Time values support an optional suffix: s (seconds), m (minutes), h (hours), d (days). "--run-time 1m" means 1 minute (the same as 60 seconds).

size

Size values are bytes by default. For example, "--disk-space-free 1024" means 1 Kibibyte. Size values support an optional suffix: k (Kibibyte), M (Mebibyte), G (Gibibyte).

DSN

See ``DSN (DATA SOURCE NAME) SPECIFICATIONS''.

Hash, hash, Array, array

Hash, hash, Array, and array values are comma-separated lists of values. For example, "--ignore-tables foo,bar" ignores tables "foo" and "bar".

CONFIGURATION FILES

Percona Toolkit tools can read options from configuration files. The configuration file syntax is simple and direct, and bears some resemblances to the MySQL command-line client tools. The configuration files all follow the same conventions.

Internally, what actually happens is that the lines are read from the file and then added as command-line options and arguments to the tool, so just think of the configuration files as a way to write your command lines.

SYNTAX

The syntax of the configuration files is as follows:

• Whitespace followed by a hash sign (#) signifies that the rest of the line is a comment. This is deleted. For example:
• Whitespace is stripped from the beginning and end of all lines.
• Empty lines are ignored.
• Each line is permitted to be in either of the following formats:

    option
    option=value
  

  Do not prefix the option with "--". Do not quote the values, even if it has spaces; value are literal. Whitespace around the equals sign is deleted during processing.

• Only long options are recognized.
• A line containing only two hyphens signals the end of option parsing. Any further lines are interpreted as additional arguments (not options) to the program.

EXAMPLE

This config file for pt-stalk,

  # Config for pt-stalk
  variable=Threads_connected
  cycles=2  # trigger if problem seen twice in a row
  --
  --user daniel

is equivalent to this command line:

  pt-stalk --variable Threads_connected --cycles 2 -- --user daniel

Options after "--" are passed literally to mysql and mysqladmin.

READ ORDER

The tools read several configuration files in order:

1.

The global Percona Toolkit configuration file, /etc/percona-toolkit/percona-toolkit.conf. All tools read this file, so you should only add options to it that you want to apply to all tools.

2.

The global tool-specific configuration file, /etc/percona-toolkit/TOOL.conf, where "TOOL" is a tool name like "pt-query-digest". This file is named after the specific tool you're using, so you can add options that apply only to that tool.

3.

The user's own Percona Toolkit configuration file, $HOME/.percona-toolkit.conf. All tools read this file, so you should only add options to it that you want to apply to all tools.

4.

The user's tool-specific configuration file, $HOME/.TOOL.conf, where "TOOL" is a tool name like "pt-query-digest". This file is named after the specific tool you're using, so you can add options that apply only to that tool.

SPECIFYING

There is a special "--config" option, which lets you specify which configuration files Percona Toolkit should read. You specify a comma-separated list of files. However, its behavior is not like other command-line options. It must be given first on the command line, before any other options. If you try to specify it anywhere else, it will cause an error. Also, you cannot specify "--config=/path/to/file"; you must specify the option and the path to the file separated by whitespace without an equal sign between them, like:

  --config /path/to/file

If you don't want any configuration files at all, specify "--config ''" to provide an empty list of files.

DSN (DATA SOURCE NAME) SPECIFICATIONS

Percona Toolkit tools use DSNs to specify how to create a DBD connection to a MySQL server. A DSN is a comma-separated string of "key=value" parts, like:

  h=host1,P=3306,u=bob

The standard key parts are shown below, but some tools add additional key parts. See each tool's documentation for details.

Some tools do not use DSNs but still connect to MySQL using options like "--host", "--user", and "--password". Such tools uses these options to create a DSN automatically, behind the scenes.

Other tools uses both DSNs and options like the ones above. The options provide defaults for all DSNs that do not specify the option's corresponding key part. For example, if DSN "h=host1" and option "--port=12345" are specified, then the tool automatically adds "P=12345" to DSN.

ESCAPING VALUES

DSNs are usually specified on the command line, so shell quoting and escaping must be taken into account. Special characters, like asterisk ("*"), need to be quoted and/or escaped properly to be passed as literal characters in DSN values.

Since DSN parts are separated by commas, literal commas in DSN values must be escaped with a single backslash ("\"). And since a backslash is the escape character for most shells, two backslashes are required to pass a literal backslash. For example, if the username is literally "my,name", it must be specified as "my\\,name" on most shells. This applies to DSNs and DSN-related options like "--user".

KEY PARTS

Many of the tools add more parts to DSNs for special purposes, and sometimes override parts to make them do something slightly different. However, all the tools support at least the following:

A

Default character set for the connection ("SET NAMES").

Enables character set settings in Perl and MySQL. If the value is "utf8", sets Perl's binmode on STDOUT to utf8, passes the "mysql_enable_utf8" option to DBD::mysql, and runs "SET NAMES 'utf8'" after connecting to MySQL. Other values set binmode on STDOUT without the utf8 layer and run "SET NAMES" after connecting to MySQL.

Unfortunately, there is no way from within Perl itself to specify the client library's character set. "SET NAMES" only affects the server; if the client library's settings don't match, there could be problems. You can use the defaults file to specify the client library's character set, however. See the description of the F part below.

D

Default database to use when connecting. Tools may "USE" a different databases while running.

F

Defaults file for the MySQL client library (the C client library used by DBD::mysql, not Percona Toolkit itself). All tools all read the "[client]" section within the defaults file. If you omit this, the standard defaults files will be read in the usual order. ``Standard'' varies from system to system, because the filenames to read are compiled into the client library. On Debian systems, for example, it's usually "/etc/mysql/my.cnf" then "~/.my.cnf". If you place the following in "~/.my.cnf", you won't have to specify your MySQL username and password on the command line:

  [client]
  user=your_user_name
  pass=secret

Omitting the F part is usually the right thing to do. As long as you have configured your "~/.my.cnf" correctly, that will result in tools connecting automatically without needing a username or password.

You can also specify a default character set in the defaults file. Unlike the ``A'' part described above, this will actually instruct the client library (DBD::mysql) to change the character set it uses internally, which cannot be accomplished any other way.

h

MySQL hostname or IP address to connect to.

L

Explicitly enable LOAD DATA LOCAL INFILE.

For some reason, some vendors compile libmysql without the --enable-local-infile option, which disables the statement. This can lead to weird situations, like the server allowing LOCAL INFILE, but the client throwing exceptions if it's used.

However, as long as the server allows LOAD DATA, clients can easily re-enable it; see <https://dev.mysql.com/doc/refman/5.0/en/load-data-local.html> and <http://search.cpan.org/~capttofu/DBD-mysql/lib/DBD/mysql.pm>. This option does exactly that.

p

MySQL password to use when connecting.

P

Port number to use for the connection. Note that the usual special-case behaviors apply: if you specify "localhost" as your hostname on Unix systems, the connection actually uses a socket file, not a TCP/IP connection, and thus ignores the port.

S

MySQL socket file to use for the connection (on Unix systems).

u

MySQL username to use when connecting, if not current system user.

BAREWORD

Many of the tools will let you specify a DSN as a single word, without any "key=value" syntax. This is called a 'bareword'. How this is handled is tool-specific, but it is usually interpreted as the ``h'' part. The tool's "--help" output will tell you the behavior for that tool.

PROPAGATION

Many tools will let you propagate values from one DSN to the next, so you don't have to specify all the parts for each DSN. For example, if you want to specify a username and password for each DSN, you can connect to three hosts as follows:

 h=host1,u=fred,p=wilma host2 host3

This is tool-specific.

   PTDEBUG=1 pt-table-checksum ... > FILE 2>&1

SYSTEM REQUIREMENTS

Most tools require:

• Perl v5.8 or newer
• Bash v3 or newer
• Core Perl modules like Time::HiRes

Tools that connect to MySQL require:

• Perl modules DBI and DBD::mysql
• MySQL 5.0 or newer

Percona Toolkit officially supports and is tested on many popular Linux distributions and MySQL 5.0 through 5.6; see http://goo.gl/srHm7 for the list of supported platforms and versions.

AUTHORS

Baron Schwartz

Baron created Maatkit, from which Percona Toolkit was forked. Many of the tools and modules were originally written by Baron.

Daniel Nichter

Daniel has been the project's lead developer since 2008. He is employed by Percona.

Frank Cizmich

Frank is a full-time Percona Toolkit developer employed by Percona.

Others

Many people have contributed code over the years. See each tool's ``AUTHORS'' section for details.

COPYRIGHT, LICENSE, AND WARRANTY

Percona Toolkit is copyright 2011-2016 Percona LLC and/or its affiliates, et al. See each program's documentation for complete copyright notices.

THIS PROGRAM IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2; OR the Perl Artistic License. On UNIX and similar systems, you can issue `man perlgpl' or `man perlartistic' to read these licenses.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

VERSION

Percona Toolkit v2.2.17 released 2016-03-04