## SYNOPSIS

**#include <magick.h>**

## DESCRIPTION

This document describes how**ImageMagick**performs color reduction on an image. To fully understand this document, you should have a knowledge of basic imaging techniques and the tree data structure and terminology.

For purposes of color allocation, an image is a set of *n* pixels,
where each pixel is a point in RGB space. RGB space is a 3-dimensional
vector space, and each pixel, *p**i*, is defined by an
ordered triple of red, green, and blue coordinates, (*r**i**,
g**i**, b**i*).

Each primary color component (red, green, or blue) represents an
intensity which varies linearly from 0 to a maximum value,
*c**max*, which corresponds to full saturation of that
color. Color allocation is defined over a domain consisting of the
cube in RGB space with opposite vertices at (0,0,0) and
(*c**max**,c**max**,c**max*). **ImageMagick**
requires *c**max** = 255*.

The algorithm maps this domain onto a tree in which each node represents a cube within that domain. In the following discussion, these cubes are defined by the coordinate of two opposite vertices: The vertex nearest the origin in RGB space and the vertex farthest from the origin.

The tree's root node represents the the entire domain, (0,0,0) through
(*c**max**,c**max**,c**max*). Each lower level in
the tree is generated by subdividing one node's cube into eight smaller
cubes of equal size. This corresponds to bisecting the parent cube
with planes passing through the midpoints of each edge.

The basic algorithm operates in three phases: **Classification,
Reduction**, and **Assignment**. **Classification** builds a
color description tree for the image. **Reduction** collapses the
tree until the number it represents, at most, is the number of colors
desired in the output image. **Assignment** defines the output
image's color map and sets each pixel's color by reclassification in
the reduced tree. Our goal is to minimize the numerical discrepancies
between the original colors and quantized colors. To learn more about
quantization error, see MEASURING COLOR REDUCTION ERROR later in this
document.

**Classification** begins by initializing a color description tree of
sufficient depth to represent each possible input color in a leaf.
However, it is impractical to generate a fully-formed color description
tree in the classification phase for realistic values of
*c**max*. If color components in the input image are
quantized to *k*-bit precision, so that *c**max** =
2**k**-1*, the tree would need *k* levels below the root
node to allow representing each possible input color in a leaf. This
becomes prohibitive because the tree's total number of nodes is

Σ ki=1 8k

A complete tree would require 19,173,961 nodes for *k = 8,
c**max** = 255*. Therefore, to avoid building a fully
populated tree, **ImageMagick**: (1) Initializes data structures for
nodes only as they are needed; (2) Chooses a maximum depth for the tree
as a function of the desired number of colors in the output image
(currently *log**4**(colormap size)+2*). A tree of this
depth generally allows the best representation of the source image with
the fastest computational speed and the least amount of memory.
However, the default depth is inappropriate for some images.
Therefore, the caller can request a specific tree depth.

For each pixel in the input image, classification scans downward from the root of the color description tree. At each level of the tree, it identifies the single node which represents a cube in RGB space containing the pixel's color. It updates the following data for each such node:

**n****1****:**- Number of pixels whose color is contained in the RGB cube which this node represents;
**n****2****:**-
Number of pixels whose color is not represented in a node at lower
depth in the tree; initially,
*n**2**= 0*for all nodes except leaves of the tree. **S****r****, S****g****, S****b****:**-
Sums of the red, green, and blue component values for all pixels not
classified at a lower depth. The combination of these sums and
*n**2*will ultimately characterize the mean color of a set of pixels represented by this node. **E:**- The distance squared in RGB space between each pixel contained within a node and the nodes' center. This represents the quantization error for a node.

**Reduction** repeatedly prunes the tree until the number of nodes with
*n**2** > 0* is less than or equal to the maximum number of colors
allowed in the output image. On any given iteration over the tree, it
selects those nodes whose *E* value is minimal for pruning and
merges their color statistics upward. It uses a pruning threshold,
*E**p*, to govern node selection as follows:

Ep = 0

while number of nodes with (n2 > 0) > required maximum number of colors

prune all nodes such that E <= Ep

Set Ep to minimum E in remaining nodes

This has the effect of minimizing any quantization error when merging two nodes together.

When a node to be pruned has offspring, the pruning procedure invokes
itself recursively in order to prune the tree from the leaves upward.
The values of *n**2** S**r**, S**g**,* and
*S**b* in a node being pruned are always added to the
corresponding data in that node's parent. This retains the pruned
node's color characteristics for later averaging.

For each node, *n**2* pixels exist for which that node
represents the smallest volume in RGB space containing those pixel's
colors. When *n**2** > 0* the node will uniquely define a
color in the output image. At the beginning of reduction,
*n**2** = 0* for all nodes except the leaves of the tree
which represent colors present in the input image.

The other pixel count, *n**1*, indicates the total
number of colors within the cubic volume which the node represents.
This includes *n**1** - n**2* pixels whose colors
should be defined by nodes at a lower level in the tree.

**Assignment** generates the output image from the pruned tree. The
output image consists of two parts: (1) A color map, which is an
array of color descriptions (RGB triples) for each color present in the
output image; (2) A pixel array, which represents each pixel as an
index into the color map array.

First, the assignment phase makes one pass over the pruned color
description tree to establish the image's color map. For each node
with *n**2** > 0*, it divides *S**r**,
S**g*, and Sb by *n**2*. This
produces the mean color of all pixels that classify no lower than this
node. Each of these colors becomes an entry in the color map.

Finally, the assignment phase reclassifies each pixel in the pruned tree to identify the deepest node containing the pixel's color. The pixel's value in the pixel array becomes the index of this node's mean color in the color map.

Empirical evidence suggests that distances in color spaces such as
YUV, or YIQ correspond to perceptual color differences more closely
than do distances in RGB space. These color spaces may give better
results when color reducing an image. Here the algorithm is as described
except each pixel is a point in the alternate color space. For convenience,
the color components are normalized to the range 0 to a maximum value,
*c**max*. The color reduction can then proceed as described.

## MEASURING COLOR REDUCTION ERROR

Depending on the image, the color reduction error may be obvious or invisible. Images with high spatial frequencies (such as hair or grass) will show error much less than pictures with large smoothly shaded areas (such as faces). This is because the high-frequency contour edges introduced by the color reduction process are masked by the high frequencies in the image.

To measure the difference between the original and color reduced images
(the total color reduction error), **ImageMagick** sums over all pixels
in an image the distance squared in RGB space between each original
pixel value and its color reduced value. **ImageMagick** prints several error
measurements including the mean error per pixel, the normalized mean error,
and the normalized maximum error.

The normalized error measurement can be used to compare images. In general, the closer the mean error is to zero the more the quantized image resembles the source image. Ideally, the error should be perceptually-based, since the human eye is the final judge of quantization quality.

These errors are measured and printed when **-verbose** and **-colors***
are specified on the command line:
*

**mean error per pixel:**

**normalized mean square error:**

This distance measure is normalized to a range between 0 and 1. It is independent of the range of red, green, and blue values in the image.

**normalized maximum square error:**

This distance measure is normalized to a range between 0 and 1. It is independent of the range of red, green, and blue values in the image.

## COPYRIGHT

Copyright (C) 2002 ImageMagick Studio, a non-profit organization dedicated to making software imaging solutions freely available.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files ("ImageMagick"), to deal in ImageMagick without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of ImageMagick, and to permit persons to whom the ImageMagick is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of ImageMagick.

The software is provided "as is", without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose and noninfringement. In no event shall ImageMagick Studio be liable for any claim, damages or other liability, whether in an action of contract, tort or otherwise, arising from, out of or in connection with ImageMagick or the use or other dealings in ImageMagick.

Except as contained in this notice, the name of the ImageMagick Studio shall not be used in advertising or otherwise to promote the sale, use or other dealings in ImageMagick without prior written authorization from the ImageMagick Studio.

## ACKNOWLEDGEMENTS

Paul Raveling, USC Information Sciences Institute, for the original idea of using space subdivision for the color reduction algorithm. With Paul's permission, this document is an adaptation from a document he wrote.## AUTHORS

John Cristy, ImageMagick Studio