NOTE
This man page only documents the hardware-specific features of the rhino driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver has been tested with :
- • Rhino 6000 VA
- • Rhino 7500 VA
- • Rhino 10000 VA
- • Rhino 20000 VA
All Rhino models are sinusoidal on-line.
EXTRA ARGUMENTS
This driver support the following extra optional settings in ups.conf(5):
battext = n - (default = 0, no extra battery, where n = Ampere*hour )
COMMANDS
- • load.on - Turn on the load immediately
- • load.off - Turn off the load immediately
- • bypass.start - Put the UPS in bypass mode
- • bypass.stop - Put the UPS out of bypass mode
- • shutdown.stayoff - Shut down in 3 minutes and do not return
AUTHOR
Silvino B. Magalhães <[email protected]>
The core driver:
nutupsdrv(8)