rtpfeed(1) Feed a DVB-S card with an RTP unicast/multicast/broacast stream

SYNOPSIS

rtpfeed [ --group group ] [ --port port R] [ --vpid vpid ] [ --apid apid ]

rtpfeed --help

rtpfeed --version

DESCRIPTION

rtpfeed takes a unicast, multicast or broadcast RTP stream from a network (typically generated by dvbstream running on a server) and feeds it to a DVB-S card for decoding and display.

As an RTP transport stream from dvbstream can contain multiple (up to eight) video streams and audio streams, the streams to display may be explicitly named on the command line.

OPTIONS

-g, --group addr
The IP address of the RTP stream. By default, this is 224.0.1.2.
-p, --port portnum
The IP port of the RTP stream. By default, this is 5004.
-v, --vpid vpid
The Video PID of the video stream to display. If none is specified, all present are fed to the DVB card.
-v, --apid apid
The Audio PID of the audio stream to display. If none is specified, all present are fed to the DVB card.
--help
display this help and exit
--version
output version information and exit

HISTORY

Parts of this program were taken from dumprtp.c by David Podeur.
 

AUTHORS

rtpfeed was writteb by Guenter Wildmann, <[email protected]>,
 with parts taken from dumprtp.c by David Podeur.

This man page was written by Alastair McKinstry, <[email protected]>.