SYNOPSIS
*** Probes ***
+DismanPing
offset = 50%
pings = 15
step = 300
# The following variables can be overridden in each target section
ownerindex = smokeping
packetsize = 56
pinghost = [email protected] # mandatory
pingsrc = 192.0.2.9
# [...]
*** Targets ***
probe = DismanPing # if this should be the default probe
# [...]
+ mytarget
# probe = DismanPing # if the default probe is something else
host = my.host
ownerindex = smokeping
packetsize = 56
pinghost = [email protected] # mandatory
pingsrc = 192.0.2.9
DESCRIPTION
Uses the DISMAN-PING-MIB to cause a remote system to send probes.VARIABLES
Supported probe-specific variables:- offset
-
If you run many probes concurrently you may want to prevent them from
hitting your network all at the same time. Using the probe-specific
offset parameter you can change the point in time when each probe will
be run. Offset is specified in % of total interval, or alternatively as
'random', and the offset from the 'General' section is used if nothing
is specified here. Note that this does NOT influence the rrds itself,
it is just a matter of when data acqusition is initiated.
(This variable is only applicable if the variable 'concurrentprobes' is set
in the 'General' section.)
Example value: 50%
- pings
-
How many pings should be sent to each target. Note that the maximum value
for DismanPing MIP is 15, which is less than the SmokePing default, so this
class has its own default value. If your Database section specifies a
value less than 15, you must also set it for this probe.
Note that the number of pings in
the RRD files is fixed when they are originally generated, and if you
change this parameter afterwards, you'll have to delete the old RRD
files or somehow convert them.
Example value: 15
Default value: 15
- step
-
Duration of the base interval that this probe should use, if different
from the one specified in the 'Database' section. Note that the step in
the RRD files is fixed when they are originally generated, and if you
change the step parameter afterwards, you'll have to delete the old RRD
files or somehow convert them. (This variable is only applicable if
the variable 'concurrentprobes' is set in the 'General' section.)
Example value: 300
Supported target-specific variables:
- ownerindex
-
The SNMP OwnerIndex to use when setting up the test.
When using VACM, can map to a Security Name or Group Name
of the entity running the test.
By default this will be set to
Example value: smokeping
- packetsize
-
The packetsize parameter lets you configure the packet size for the pings
sent. The minimum is 8, the maximum 65507. Use the same number as with
fping if you want the same packet sizes being used on the network.
Default value: 56
- pinghost
-
The (mandatory) pinghost parameter specifies the remote system which will
execute the pings, as well as the SNMP community string on the device.
Example value: [email protected]
This setting is mandatory.
- pingsrc
-
The (optional) pingsrc parameter specifies the source address to be used
for pings. If specified, this parameter must identify an IP address
assigned to pinghost.
Example value: 192.0.2.9
NOTES
MENU NAMES
This probe uses the menu name of a test as part of the unique index. If the menu name is longer than 32 characters, the last 32 characters are used for the index. Collisions are *not* detected and simply cause one test's results to be used for all colliding names.CONFIGURATION
This probe requires read/write access to the pingCtlTable. It also requires read-only access to the pingResultsTable and the pingHistoryTable. The DISMAN-PING-MIB is structured such that it is possible to restrict by pingCtlOwnerIndex. This probe uses a pingCtlOwnerIndex of ``SP on hostname'' as ownerindex by default; use ownerindex to configure this if needed.SAMPLE JUNOS CONFIGURATION
This configuration permits the community ``pinger'' read-write access to the full DISMAN-PING-MIB, but only when sourced from the manager at 192.0.2.134.
snmp {
view pingMIB {
oid .1.3.6.1.2.1.80 include;
}
community pinger {
view pingMIB;
authorization read-write;
clients {
192.0.2.134/32;
}
}
}
SAMPLE CONFIGURATIONS NOTE
This configuration allows the ``pinger'' community full access to the DISMAN-PING-MIB. There is information in the description of pingCtlOwnerIndex in RFC 4560 (<http://tools.ietf.org/html/rfc4560>) about using the vacmViewTreeFamilyTable to further restrict access. The author has not tried this method.