STANDARD-MIB(7) The Erlang/OTP MIB module for SNMP standard datatypes

DESCRIPTION

STANDARD-MIB DEFINITIONS ::= BEGIN
 
        IMPORTS
                Counter, TimeTicks
                        FROM RFC1155-SMI
                OBJECT-TYPE
                        FROM RFC-1212
                DisplayString, mib-2
                        FROM RFC1213-MIB
                ;
-- Standard Datatypes
 
-- From SNMPv2 (rfc1903)
TruthValue ::= 
-- Represents a boolean value
         INTEGER { true(1), false(2) }
-- From SNMPv2 (rfc1903)
DateAndTime ::=
--    DESCRIPTION
--            "A date-time specification.
--
--            field  octets  contents                  range
--              1      1-2   year                      0..65536
--              2       3    month                     1..12
--              3       4    day                       1..31
--              4       5    hour                      0..23
--              5       6    minutes                   0..59
--              6       7    seconds                   0..60
--                           (use 60 for leap-second)
--              7       8    deci-seconds              0..9
--              8       9    direction from UTC        '+' / '-'
--              9      10    hours from UTC            0..11
--             10      11    minutes from UTC          0..59
--
--            For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be
--            displayed as:
--
--                             1992-5-26,13:30:15.0,-4:0
--
--            Note that if only local time is known, then timezone
--            information (fields 8-10) is not present."
        OCTET STRING (SIZE (8 | 11))
-- From SNMPv2 (rfc1903)
RowStatus ::= 
        INTEGER {
                -- the following two values are states:
                -- these values may be read or written
                active(1),
                notInService(2),
                -- the following value is a state:
                -- this value may be read, but not written
                notReady(3erl),
                -- the following three values are
                -- actions: these values may be written,
                --   but are never read
                createAndGo(5),
                createAndWait(5),
                destroy(7)
                }
system       OBJECT IDENTIFIER ::= { mib-2 1 }
snmp         OBJECT IDENTIFIER ::= { mib-2 11 }
 
-- the System group
 
-- Implementation of the System group is mandatory for all
-- systems.  If an agent is not configured to have a value
-- for any of these variables, a string of length 0 is
-- returned.
 
sysDescr OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (0..255))
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A textual description of the entity.  This value
                should include the full name and version
                identification of the system's hardware type,
                software operating-system, and networking
                software.  It is mandatory that this only contain
                printable ASCII characters."
        ::= { system 1 }
 
sysObjectID OBJECT-TYPE
        SYNTAX  OBJECT IDENTIFIER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The vendor's authoritative identification of the
                network management subsystem contained in the
                entity.  This value is allocated within the SMI
                enterprises subtree (1.3.6.1.4.1) and provides an
                easy and unambiguous means for determining `what
                kind of box' is being managed.  For example, if
                vendor `Flintstones, Inc.' was assigned the
                subtree 1.3.6.1.4.1.4242, it could assign the
                identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
                Router'."
        ::= { system 2 }
 
sysUpTime OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The time (in hundredths of a second) since the
                network management portion of the system was last
                re-initialized."
        ::= { system 3 }
 
sysContact OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (0..255))
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The textual identification of the contact person
                for this managed node, together with information
                on how to contact this person."
        ::= { system 4 }
 
sysName OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (0..255))
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "An administratively-assigned name for this
                managed node.  By convention, this is the node's
                fully-qualified domain name."
        ::= { system 5 }
 
sysLocation OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (0..255))
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The physical location of this node (e.g.,
                `telephone closet, 3rd floor')."
        ::= { system 6 }
 
sysServices OBJECT-TYPE
        SYNTAX  INTEGER (0..127)
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "A value which indicates the set of services that
                this entity primarily offers.
 
                The value is a sum.  This sum initially takes the
                value zero, Then, for each layer, L, in the range
                1 through 7, that this node performs transactions
                for, 2 raised to (L - 1) is added to the sum.  For
                example, a node which performs primarily routing
                functions would have a value of 4 (2^(3-1)).  In
                contrast, a node which is a host offering
                application services would have a value of 72
                (2^(4-1) + 2^(7-1)).  Note that in the context of
                the Internet suite of protocols, values should be
                calculated accordingly:
 
                        layer  functionality
                        1  physical (e.g., repeaters)
                        2  datalink/subnetwork (e.g., bridges)
                        3  internet (e.g., IP gateways)
                        4  end-to-end  (e.g., IP hosts)
                        7  applications (e.g., mail relays)
 
                For systems including OSI protocols, layers 5 and
                6 may also be counted."
        ::= { system 7 }
 
        -- the SNMP group
 
        -- Implementation of the SNMP group is mandatory for all
        -- systems which support an SNMP protocol entity.  Some of
        -- the objects defined below will be zero-valued in those
        -- SNMP implementations that are optimized to support only
        -- those functions specific to either a management agent or
        -- a management station.  In particular, it should be
        -- observed that the objects below refer to an SNMP entity,
        -- and there may be several SNMP entities residing on a
        -- managed node (e.g., if the node is hosting acting as
        -- a management station).
 
snmpInPkts OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of Messages delivered to the
                SNMP entity from the transport service."
        ::= { snmp 1 }
 
snmpOutPkts OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Messages which were
                passed from the SNMP protocol entity to the
                transport service."
        ::= { snmp 2 }
 
snmpInBadVersions OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Messages which were
                delivered to the SNMP protocol entity and were for
                an unsupported SNMP version."
        ::= { snmp 3 }
 
snmpInBadCommunityNames OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Messages delivered to
                the SNMP protocol entity which used a SNMP
                community name not known to said entity."
        ::= { snmp 4 }
 
snmpInBadCommunityUses OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Messages delivered to
                the SNMP protocol entity which represented an SNMP
                operation which was not allowed by the SNMP
                community named in the Message."
        ::= { snmp 5 }
 
snmpInASNParseErrs OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of ASN.1 or BER errors
                encountered by the SNMP protocol entity when
                decoding received SNMP Messages."
        ::= { snmp 6 }
 
        -- { snmp 7 } is not used
 
snmpInTooBigs OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP PDUs which were
                delivered to the SNMP protocol entity and for
                which the value of the error-status field is
                `tooBig'."
        ::= { snmp 8 }
 
snmpInNoSuchNames OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP PDUs which were
                delivered to the SNMP protocol entity and for
                which the value of the error-status field is
                `noSuchName'."
        ::= { snmp 9 }
 
snmpInBadValues OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP PDUs which were
                delivered to the SNMP protocol entity and for
                which the value of the error-status field is
                `badValue'."
        ::= { snmp 10 }
 
snmpInReadOnlys OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number valid SNMP PDUs which were
                delivered to the SNMP protocol entity and for
                which the value of the error-status field is
                `readOnly'.  It should be noted that it is a
                protocol error to generate an SNMP PDU which
                contains the value `readOnly' in the error-status
                field, as such this object is provided as a means
                of detecting incorrect implementations of the
                SNMP."
        ::= { snmp 11 }
 
snmpInGenErrs OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP PDUs which were
                delivered to the SNMP protocol entity and for
                which the value of the error-status field is
                `genErr'."
        ::= { snmp 12 }
 
snmpInTotalReqVars OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of MIB objects which have been
                retrieved successfully by the SNMP protocol entity
                as the result of receiving valid SNMP Get-Request
                and Get-Next PDUs."
        ::= { snmp 13 }
 
snmpInTotalSetVars OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of MIB objects which have been
                altered successfully by the SNMP protocol entity
                as the result of receiving valid SNMP Set-Request
                PDUs."
        ::= { snmp 14 }
 
snmpInGetRequests OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Get-Request PDUs which
                have been accepted and processed by the SNMP
                protocol entity."
        ::= { snmp 15 }
 
snmpInGetNexts OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Get-Next PDUs which have
                been accepted and processed by the SNMP protocol
                entity."
        ::= { snmp 16 }
 
snmpInSetRequests OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Set-Request PDUs which
                have been accepted and processed by the SNMP
                protocol entity."
        ::= { snmp 17 }
 
snmpInGetResponses OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Get-Response PDUs which
                have been accepted and processed by the SNMP
                protocol entity."
        ::= { snmp 18 }
 
snmpInTraps OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Trap PDUs which have
                been accepted and processed by the SNMP protocol
                entity."
        ::= { snmp 19 }
 
snmpOutTooBigs OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP PDUs which were
                generated by the SNMP protocol entity and for
                which the value of the error-status field is
                `tooBig.'"
        ::= { snmp 20 }
 
snmpOutNoSuchNames OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP PDUs which were
                generated by the SNMP protocol entity and for
                which the value of the error-status is
                `noSuchName'."
        ::= { snmp 21 }
 
snmpOutBadValues OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP PDUs which were
                generated by the SNMP protocol entity and for
                which the value of the error-status field is
                `badValue'."
        ::= { snmp 22 }
 
        -- { snmp 23 } is not used
 
snmpOutGenErrs OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP PDUs which were
                generated by the SNMP protocol entity and for
                which the value of the error-status field is
                `genErr'."
        ::= { snmp 24 }
 
snmpOutGetRequests OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Get-Request PDUs which
                have been generated by the SNMP protocol entity."
        ::= { snmp 25 }
 
snmpOutGetNexts OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Get-Next PDUs which have
                been generated by the SNMP protocol entity."
        ::= { snmp 26 }
 
snmpOutSetRequests OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Set-Request PDUs which
                have been generated by the SNMP protocol entity."
        ::= { snmp 27 }
 
snmpOutGetResponses OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Get-Response PDUs which
                have been generated by the SNMP protocol entity."
        ::= { snmp 28 }
 
snmpOutTraps OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The total number of SNMP Trap PDUs which have
                been generated by the SNMP protocol entity."
        ::= { snmp 29 }
 
snmpEnableAuthenTraps OBJECT-TYPE
        SYNTAX  INTEGER { enabled(1), disabled(2) }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Indicates whether the SNMP agent process is
                permitted to generate authentication-failure
                traps.  The value of this object overrides any
                configuration information; as such, it provides a
                means whereby all authentication-failure traps may
                be disabled.
 
                Note that it is strongly recommended that this
                object be stored in non-volatile memory so that it
                remains constant between re-initializations of the
                network management system."
        ::= { snmp 30 }
 
coldStart TRAP-TYPE
        ENTERPRISE  snmp
        DESCRIPTION
                "A coldStart trap signifies that the sending
                protocol entity is reinitializing itself such
                that the agent's configuration or the rotocol
                entity implementation may be altered."
        ::= 0
warmStart TRAP-TYPE
        ENTERPRISE  snmp
        DESCRIPTION
                "A warmStart trap signifies that the sending
                protocol entity is reinitializing itself such
                that neither the agent configuration nor the
                protocol entity implementation is altered."
        ::= 1
authenticationFailure TRAP-TYPE
        ENTERPRISE  snmp
        DESCRIPTION
                "An authenticationFailure trap signifies that
                the sending protocol entity is the addressee
                of a protocol message that is not properly
                authenticated.  While implementations of the
                SNMP must be capable of generating this trap,
                they must also be capable of suppressing the
                emission of such traps via an implementation-
                specific mechanism."
        ::= 4
END