NOTE
This man page only documents the hardware-specific features of the tripplitesu driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
This driver supports the Tripp Lite SmartOnline family (via the serial port).
EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5):
lowbatt=num
- Set the low battery warning threshold in percent at which shutdown is initiated by upsmon(8). By default, the UPS may not report low battery until there are only a few seconds left. Common values are around 25---30.
AUTHOR
Allan N. Hessenflow <[email protected]>
The core driver:
nutupsdrv(8)
Other drivers for Tripp-Lite hardware:
tripplite(8), tripplite_usb(8), usbhid-ups(8)