victronups(8) Driver for IMV/Victron UPS unit Match, Match Lite, NetUps

NOTE

This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line.

The Match Lite line may only report a handful of variables. This is usually not a bug - they just don't support anything else.

CABLING

If your Victron cable is broken or missing, use this diagram to build a clone:

docs/cables/victron.txt

EXTRA ARGUMENTS

This driver supports the following optional setting in the ups.conf(5):

modelname=name

Set model name

usd=delay

Set delay before shutdown on UPS

BUGS

The protocol for this UPS is not officially documented.

AUTHOR

Radek Benedikt <[email protected]>, Daniel Prynych <[email protected]>

The core driver:

nutupsdrv(8)

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/