Weather::Com::Base(3) Perl extension for getting weather information from


use Data::Dumper;
use Weather::Com::Base;

  # define parameters for weather search
  my %params = (
                'current'    => 1,
                'forecast'   => 3,
                'links'      => 1,
                'units'      => 's',
                'proxy'      => '',
                'timeout'    => 250,
                'debug'      => 1,
                'partner_id' => 'somepartnerid',
                'license'    => '12345678',

  # instantiate a new object
  my $weather_com = Weather::Com::Base->new(%params);

  # search for locations called 'Heidelberg'
  my $locations = $weather_com->search('Heidelberg')
        or die "No location found!\n";

  # and then get the weather for each location found
  foreach (keys %{$locations}) {
        my $weather = $weather_com->get_weather($_);
        print Dumper($weather);


new(hash or hashref)

The constructor takes a hash or a hashref containing a bunch of parameters used to configure your weather search. None of these paramters is mandatory. As there are reasonable defaults for any of them, you need only to provide those parameters where you whish to go with non-default values.

The parameters in detail:

current => 0 | 1
This parameter defines whether to fetch the current conditions of a location or not.

Defaults to 0 (false).

forecast => 0 | 1 .. 10
This parameter defines whether to fetch a weather forecast or not.

If set to 0 (false) no forecast is read, if set to a value between 1 and 10 a forecast for the number of days is requested. If set to any other value, this is interpreted as 0!

Defaults to 0 (false).

links => 0 | 1
This parameter specifies whether to load some http links from also or not.
units => s | m
This parameter defines whether to fetch information in metric (m) or US (s) format.

Defaults to 'm'.

proxy => 'none' | ''
Usually no proxy is used by the LWP::UserAgent module used to communicate with If you want to use an HTTP proxy you can specify one here.
proxy_user => undef | 'myuser'
If specified, this parameter is provided to the proxy for authentication purposes.

Defaults to undef.

proxy_pass => undef | 'mypassword'
If specified, this parameter is provided to the proxy for authentication purposes.

Defaults to undef.

timeout => some integer (in seconds)
The timeout for LWP::UserAgent to get an HTTP request done usually is set to 180s. If you need a longer timeout or for some reasons a shorter one you can set this here.

Defaults to 180 seconds.

debug => 0 | 1
Set debugging on/off.

Defaults to 0 (off).

partner_id => 'somepartnerid'
To be allowed to fetch weather information from you need to register (free of charge) to get a so called Partner Id and a License Key.
license => 'somelicensekey'
See partner_id.


search(place to search)

Searches for all known locations matching the provided search string.

At you have to request weather data for a specific location. Therefor you first have to find the location id for the location you are looking for. provides two possibilities to search:

1. by name
You may search for a location by name, e.g. ``Heidelberg'', ``Heidelberg, Germany'', ``New York, NY'', etc.
2. by postal code
You may search for a location by the postal code.

If the search causes an error, this methods dies with a (hopefully) helpful error message.

If the search returns no matches, 0 is returned.

Else, the method returns a hashref containing all locations found. The hashref looks as follows if you search for Heidelberg:

  $HASHREF = {
        'GMXX0053' => 'Heidelberg, Germany',
        'USKY0990' => 'Heidelberg, KY',
        'USMS0154' => 'Heidelberg, MS'

The keys of the hash are the location ids as used within This keys have to be used for fetching the weather information of one location.

get_weather(location id)

This method fetches all weather information as defined by the object attributes you may have modified while instantiating the weather object.

If an error occurs while fetching weather information, this method dies setting $@ to a meaningfull error message.

The following hashref shows the maximum of data that can be fetched from The parts of the hashref are explained afterwards.

  $HASHREF = {
        'head' => {
                'ur'     => 'mm',
                'ud'     => 'km',
                'us'     => 'km/h',
                'form'   => 'MEDIUM',
                'up'     => 'mb',
                'locale' => 'en_US',
                'ut'     => 'C'
        'loc' => {
                'suns'   => '8:40 PM',
                'zone'   => '2',
                'lat'    => '49.41',
                'tm'     => '3:48 PM',
                'sunr'   => '6:18 AM',
                'dnam'   => 'Heidelberg, Germany',
                'id'     => 'GMXX0053',
                'lon'    => '8.68'
        'cc' => {
                'icon' => '28',
                'flik' => '21',
                'obst' => 'Mannhein, Germany',
                'lsup' => '8/16/04 3:20 PM Local Time',
                'tmp'  => '21',
                'hmid' => '78',
                'wind' => {
                        'gust' => 'N/A',
                        'd'    => '170',
                        's'    => '11',
                        't'    => 'S'
                'bar'  => {
                        'r' => '1,010.8',
                        'd' => 'steady'
                'dewp' => '17',
                'uv'   => {
                        't' => 'Moderate',
                        'i' => '3'
                'vis'  => '10.0',
                't'    => 'Mostly Cloudy'
        'dayf' => {
                'lsup' => '8/16/04 12:17 PM Local Time',
                'day'  => [     
                                'hi'   => '27',
                                'suns' => '8:40 PM',
                                'dt'   => 'Aug 16',
                                'part' => [
                                                'hmid' => '57',
                                                'wind' => {
                                                        'gust' => 'N/A',
                                                        'd'    => '204',
                                                        's'    => '16',
                                                        't'    => 'SSW'
                                                'icon' => '28',
                                                'p'    => 'd',
                                                'ppcp' => '20',
                                                't'    => 'Mostly Cloudy'
                                                'hmid' => '87',
                                                'wind' => {
                                                        'gust' => 'N/A',
                                                        'd'    => '215',
                                                        's'    => '13',
                                                        't'    => 'SW'
                                                'icon' => '11',
                                                'p'    => 'n',
                                                'ppcp' => '60',
                                                't'    => 'Showers'
                                'd'    => '0',
                                'sunr' => '6:18 AM',
                                'low'  => '16',
                                't'    => 'Monday'

                        ... next day ...,

                        ... and so on ...,

        'lnks' => {
                'link' => [
                                'l'   => '',
                                'pos' => '1',
                                't'   => 'Pollen Reports'
                                'l'   => '',
                                'pos' => '2',
                                't'   => 'Airport Delays'
                                'l'   => '',
                                'pos' => '3',
                                't'   => 'Special Events'
                                'l'   => '',
                                'pos' => '4',
                                't'   => 'Download Desktop Weather'
                'type' => 'prmo'
        'ver' => '2.0'

Header Information Block

The hashref head contains unit of measure definitions for the whole dataset. Usually they are either all metric or all us.

Should always be en_US. Up to now I have not found any possiblity to get other locales.
ut (unit of temperature)
Could be C for Celsius or F for Fahrenheit.
us (unit of speed)
Could be km/h or mph.
ud (unit of distance)
Could be km or mi.
ur (unit of precipitation)
Could be mb (millibar) or in.
up (unit of pressure)
Could be mb or in for in Hg.
format (textformat)

Location Information Block

The hashref loc contains some information about the location that does not change very much each hour or day.

id (location id)
This is the location id as used to get the weather for the location.
dnam (descriptive name)
This is a name describing the location, e.g. Heidelberg, Germany.
tm (time)
This is the current local time of the location (if not using cached data).

Time is always presented like 8:45 AM or 11:33 PM.

zone (timezone)
This is the timezone. It is presented as time offset from GMT.
suns (time of sunset)
sunr (time of sunrise)
lat (latitude)
The latitude is presented as 2 digit decimal.
lon (longitude)
The longitude is presented as 2 digit decimal.

Current Conditions Block

The hashref cc contains information about the current conditions.

The SDK from contains a set of weather icons. These icons have filenames like 28.png. This element is this icon number.
flik (windchill)
This is the temperature considering the windchill factor.
obst (observatory)
The observatory that reported the weather data.
lsup (last updated)
Date and time when the weather data has been reported. Format is 8/16/04 6:10 AM EDT. In some cases (e.g. for Heidelberg in Germany) there may be no official timezone identifier but the keyword Local or Local Time.
tmp (temperature)
hmid (humidity)
Maximum gust speed.
Wind direction in degrees.
Text description of direction.
Wind speed
bar (air pressure)
r (pressure)
Decimal current pressure.
d (description)
Text description of raise or fall of pressure.
Integer dew point.
uv (uv index data)
Integer index value.
Text description of value.
vis (decimal visibility)
Text description of condition.


Up to 10 days of forecasts can be found in the hashref dayf.

lsup (last updated)
self explanatory
day contains either a hash containing the forecast for one day or it contains an an array of hashes, one for each day.
dt (date)
The date of the forecasted day. Only name of month and day, e.g. Aug 16.
d (number of the day)
t (name of the day)
e.g. Monday
hi (highest temperature)
low (lowest temperature)
suns (time of sunset)
sunr (time of sunrise)
part (block of day part data)
There are always to blocks of day part data. One for the the night and one for the day.
hmid (humidity)
wind (see current conditions block)
icon (see current conditions block)
p (part of day)
Maybe d for day or n for night.
ppcp (percent chance of precipitation)
t (description of conditions)


The hashref lnks contains some links to other weather information that may be interesting for the chosen location. This will not be explained in further detail here. Just play around with the sample...