man acpi_hp (4): ACPI extras driver for HP laptops

SYNOPSIS

To compile this driver into the kernel, place the following line in your kernel configuration file:

device acpi_hp

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:

acpi_hp_load="YES"

DESCRIPTION

The driver provides support for ACPI-controlled features found on HP laptops that use a WMI enabled BIOS (e.g. HP Compaq 8510p and 6510p).

The main purpose of this driver is to provide an interface, accessible via sysctl(8), devd(8)and devfs(8), through which applications can determine and change the status of various laptop components and BIOS settings.

devd(8)SsEvents

Devd events received by devd(8) provide the following information:

system: Qq Li ACPI
subsystem: Qq Li HP
type: The source of the event in the ACPI namespace. The value depends on the model.
notify: Event code (see below).

Event codes:

0xc0: WLAN on air status changed to 0 (not on air)
0xc1: WLAN on air status changed to 1 (on air)
0xd0: Bluetooth on air status changed to 0 (not on air)
0xd1: Bluetooth on air status changed to 1 (on air)
0xe0: WWAN on air status changed to 0 (not on air)
0xe1: WWAN on air status changed to 1 (on air)

devfs(8)SsDevice

You can read /dev/hpcmi to see your current BIOS settings. The detail level can be adjusted by setting the sysctl cmi_detail as described below.

SYSCTL VARIABLES

The following sysctls are currently implemented:

WLAN:

dev.acpi_hp.0.wlan_enabled: Toggle WLAN chip activity.
dev.acpi_hp.0.wlan_radio: (read-only) WLAN radio status (controlled by hardware switch)
dev.acpi_hp.0.wlan_on_air: (read-only) WLAN on air (chip enabled, hardware switch enabled + enabled in BIOS)
dev.acpi_hp.0.wlan_enabled_if_radio_on: If set to 1, the WLAN chip will be enabled if the radio is turned on
dev.acpi_hp.0.wlan_disable_if_radio_off: If set to 1, the WLAN chip will be disabled if the radio is turned off

Bluetooth:

dev.acpi_hp.0.bt_enabled: Toggle Bluetooth chip activity.
dev.acpi_hp.0.bt_radio: (read-only) Bluetooth radio status (controlled by hardware switch)
dev.acpi_hp.0.bt_on_air: (read-only) Bluetooth on air (chip enabled, hardware switch enabled + enabled in BIOS)
dev.acpi_hp.0.bt_enabled_if_radio_on: If set to 1, the Bluetooth chip will be enabled if the radio is turned on
dev.acpi_hp.0.bt_disable_if_radio_off: If set to 1, the Bluetooth chip will be disabled if the radio is turned off

WWAN:

dev.acpi_hp.0.wwan_enabled: Toggle WWAN chip activity.
dev.acpi_hp.0.wwan_radio: (read-only) WWAN radio status (controlled by hardware switch)
dev.acpi_hp.0.wwan_on_air: (read-only) WWAN on air (chip enabled, hardware switch enabled + enabled in BIOS)
dev.acpi_hp.0.wwan_enabled_if_radio_on: If set to 1, the WWAN chip will be enabled if the radio is turned on
dev.acpi_hp.0.wwan_disable_if_radio_off: If set to 1, the WWAN chip will be disabled if the radio is turned off

Misc:

dev.acpi_hp.0.als_enabled

Toggle ambient light sensor (ALS)

dev.acpi_hp.0.display

(read-only) Display status (bitmask)

dev.acpi_hp.0.hdd_temperature

(read-only) HDD temperature

dev.acpi_hp.0.is_docked

(read-only) Docking station status (1 if docked)

dev.acpi_hp.0.cmi_detail

Bitmask to control detail level in /dev/hpcmi output (values can be ORed).

0x01: Show path component of BIOS setting
0x02: Show a list of valid options for the BIOS setting
0x04: Show additional flags of BIOS setting (ReadOnly etc.)
0x08: Query highest BIOS entry instance. This is broken on many HP models and therefore disabled by default.

dev.acpi_hp.0.verbose

(read-only) Set verbosity level

Defaults for these sysctls can be set in sysctl.conf5.

HARDWARE

The driver has been reported to support the following hardware:

HP Compaq 8510p
HP Compaq nx7300

It should work on most HP laptops that feature a WMI enabled BIOS.

FILES

/dev/hpcmi: Interface to read BIOS settings

EXAMPLES

The following can be added to devd.conf5 in order disable the LAN interface when WLAN on air and reenable if it's not:

notify 0 {
        match "system"          "ACPI";
        match "subsystem"       "HP";
        match "notify"          "0xc0";
        action                  "ifconfig em0 up";
};
notify 0 {
        match "system"          "ACPI";
        match "subsystem"       "HP";
        match "notify"          "0xc1";
        action                  "ifconfig em0 down";
};

Enable the ambient light sensor:

sysctl dev.acpi_hp.0.als_enabled=1

Enable Bluetooth:

sysctl dev.acpi_hp.0.bt_enabled=1

Get BIOS settings:

cat /dev/hpcmi
Serial Port                                Disable
Infrared Port                              Enable
Parallel Port                              Disable
Flash Media Reader                         Disable
USB Ports including Express Card slot      Enable
1394 Port                                  Enable
Cardbus Slot                               Disable
Express Card Slot                          Disable
(...)

Set maximum detail level for /dev/hpcmi output:

sysctl dev.acpi_hp.0.cmi_detail=7

HISTORY

The device driver first appeared in Fx 8.0 .

AUTHORS

An -nosplit The driver was written by An Michael Gmelin Aq [email protected] .

It has been inspired by hp-wmi driver, which implements a subset of these features (hotkeys) on Linux.

HP CMI whitepaper:: http://h20331.www2.hp.com/Hpsub/downloads/cmi_whitepaper.pdf
wmi-hp for Linux:: http://www.kernel.org
WMI and ACPI:: http://www.microsoft.com/whdc/system/pnppwr/wmi/wmi-acpi.mspx

This manual page was written by An Michael Gmelin Aq [email protected] .

BUGS

This driver is experimental and has only been tested on i386 on an HP Compaq 8510p which featured all supported wireless devices (WWAN/BT/WLAN). Expect undefined results when operating on different hardware.

Loading the driver is slow. Reading from /dev/hpcmi is even slower.

Additional features like HP specific sensor readings or writing BIOS settings are not supported.