SYNOPSIS

bmaptool [--help] [--version] [--quiet] [--debug] <subcommand> [<options>] <args>

DESCRIPTION

Bmaptool is a generic tool for creating the block map (bmap) for a file and copying files using the block map. The idea is that large files, like raw system image files, can be copied or flashed a lot faster with bmaptool than with traditional tools, like "dd" or "cp".

Bmaptool supports 2 subcommands:

1. copy - copy a file to another file using bmap or flash an image to a block device

2. create - create a bmap for a file

Please, find full documentation for the project at https://source.tizen.org/documentation/reference/bmaptool

OPTIONS

--version

Print bmaptool version and exit.

-h, --help

Print short help text and exit.

-q, --quiet

Be quiet, do not print extra information.

-d, --debug

Print debugging messages.

COMMANDS

copy [options] IMAGE DEST

Copy file IMAGE to the destination regular file or block device DEST using bmap. IMAGE may either be a local path or an URL. DEST may either be a regular file or a block device (only local).

Unless the bmap file is explicitly specified with the "--bmap" option, bmaptool automatically discovers it by looking for a file with the same basename as IMAGE but with the ".bmap" extension. The bmap file is only looked for in IMAGE's directory (or base URL, in case IMAGE was specified as an URL). If the bmap file is not found, bmaptool fails. To copy without bmap, use the "--nobmap" option.

Both IMAGE and the bmap file may be specified as an URL (http://, ftp://, https://, file://, ssh://). In order to make bmaptool use a proxy server, please, specify the proxy using the standard "$http_proxy", "$https_proxy", "$ftp_proxy" or "$no_proxy" environment variables.

If the server requires authentication, user name and password may be specified in the URL, for example "https://user:[email protected]/image.raw.bz2", or "ssh://user:password@host:path/to/image.raw".

IMAGE may be compressed, in which case bmaptool decompresses it on-the-fly. The compression type is detected by the file extension and the following extensions are supported:

1. ".gz", ".gzip", ".tar.gz" and ".tgz" for files and tar archives compressed with "gzip" program

2. ".bz2", "tar.bz2", ".tbz2", ".tbz", and ".tb2" for files and tar archives compressed with "bzip2" program

3. ".xz", ".tar.xz", ".txz" for files and tar archives compressed with "xz" program

4. ".lzo", "tar.lzo", ".tzo" for files and tar archives compressed with "lzo" program

IMAGE files with other extensions are assumed to be uncompressed. Note, bmaptool uses "pbzip2" and "pigz" programs for decompressing bzip2 and gzip archives faster, unless they are not available, in which case if falls-back to using "bzip2" and "gzip".

If DEST is a block device node (e.g., "/dev/sdg"), bmaptool opens it in exclusive mode. This means that it will fail if any other process has IMAGE block device node opened. This also means that no other processes will be able to open IMAGE until bmaptool finishes the copying. Please, see semantics of the "O_EXCL" flag of the "open()" syscall.

The bmap file typically contains SHA-256 checksum for itself as well as SHA-256 checksum for all the mapped data regions, which makes it possible to guarantee data integrity. bmaptool verifies the checksums and exits with an error in case of a mismatch. Checksum verification can be disabled using the "--no-verify" option. bmaptool does not verify that unampped areas contain only zeroes, because these areas are anyway dropped and are not used for anything.

The bmap file may be signed with OpenPGP (gpg). The signature may be either detached (a separate file) or "built into" the bmap file (so called "clearsign" signature).

The detached signature can be specified with the "--bmap-sig" option, otherwise bmaptool tries to automatically discover it by looking for a file with the same basename as the bmap file but with the ".asc" or ".sig" extension. This is very similar to the bmap file auto-discovery. So if a ".asc" or ".sig" file exists, bmaptool will verify the signature.

The clearsign signature is part of the bmap file and bmaptool automatically detected and verifies it.

If the signature is bad, bmaptool exits with an error. Bmap file signature verification can be disabled using the "--no-sig-verify" option.

OPTIONS

-h, --help

Print short help text about the "copy" subcommand and exit.

--bmap BMAP

Use bmap file "BMAP" for copying. If this option is not specified, bmaptool tries to automatically discover the bmap file.

--bmap-sig SIG

Use a detached OpenPGP signature file "SIG" for verifying the bmap file integrity and publisher. If this option is not specified, bmaptool tries to automatically discover the signature file.

--nobmap

Disable automatic bmap file discovery and force flashing entire IMAGE without bmap.

--no-verify

Do not verify data checksums when copying (not recommended). The checksums are stored in the bmap file, and normally bmaptool verifies that the data in IMAGE matches the checksums.

--no-sig-verify

Do not verify the OpenPGP bmap file signature (not recommended).

EXAMPLES

bmaptool copy image.raw.bz2 /dev/sdg

Copy bz2-compressed local file "image.raw.bz2" to block device "/dev/sdg". The image file is uncompressed on-the-fly. The bmap file is discovered automatically. The OpenPGP signature is detected/discovered automatically too.

bmaptool copy http://my-server.com/files/image.raw.bz2 $HOME/tmp/file

Copy bz2-compressed remote "image.raw.bz2" to regular file "$HOME/tmp/file". The image file is uncompressed on-the-fly. The bmap file is discovered automatically. The OpenPGP signature is detected/discovered automatically too.

bmaptool copy --bmap image.bmap --bmap-sig image.bmap.asc image.raw /dev/sdg

Copy non-compressed local file "image.raw" to block device "/dev/sdg" using bmap file "image.bmap". Verify the bmap file signature using a detached OpenPGP signature from "imag.bmap.asc".

create [options] IMAGE

Generate bmap for a regular file IMAGE. Internally, this subcommand uses the Linux "FIEMAP" ioctl to find out which IMAGE blocks are mapped. However, if "FIEMAP" is not supported, the "SEEK_HOLE" feature of the "lseek" system call is used instead. By default, the resulting bmap file is printed to stdout, unless the "--output" option is used.

The IMAGE file is always synchronized before the block map is generated. And it is important to make sure that the IMAGE file is not modified when the bmap file is being generated, and after the bmap file has been generated. Otherwise the bmap file becomes invalid and checksum verification will fail.

The image file can further be signed using OpenPGP.

OPTIONS

-h, --help

Print short help text about the "create" subcommand and exit.

-o, --output OUTPUT

Save the generated bmap in the OUTPUT file (by default the bmap is printed to stdout).

--no-checksum

Generate a bmap file without SHA1 checksums (not recommended).

EXAMPLES

bmaptool create image.raw

Generate bmap for the "image.raw" file and print it to stdout.

bmaptool create -o image.bmap image.raw

Generate bmap for the "image.raw" file and save it in "image.bmap".

AUTHOR

Artem Bityutskiy <[email protected]>.

REPORTING BUGS

Please, report bugs to Artem Bityutskiy <[email protected]> or to the bmap-tools mailing list <[email protected]>.