SYNOPSIS

byobu [screen options]

byobu-screen [screen options]

byobu-tmux [tmux options]

Options to byobu are simply passed through screen(1) or tmux(1).

DESCRIPTION

byobu is a script that launches a text based window manager (either screen(1) or tmux(1)) in the byobu configuration. This enables the display of system information and status notifications within two lines at the bottom of the screen session. It also enables multiple tabbed terminal sessions, accessible through simple keystrokes.

byobu currently defaults to using tmux(1) (if present) as the backend, however, this can be overridden with the byobu-select-backend(1) utility.

Note that BYOBU_CONFIG_DIR=$XDG_CONFIG_HOME/byobu if defined, and $HOME/.byobu otherwise.

BACKGROUND COLORS

The background colors of the byobu status lines can be adjusted by editing the files $HOME/.byobu/color (for byobu-screen) and $HOME/.byobu/color.tmux (for byobu-tmux). The command Ctrl-Shift-F5 will change the background to a randomly selected color when running in byobu-tmux mode. Simply remove those files to return to the default color configuration.

STATUS NOTIFICATIONS

byobu supports a number of unique and interesting status notifications across the lowest two lines in the screen. Each status notification item is independently configurable, enabled and disabled by the configuration utility. The guide below helps identify each status item (in alphabetical order):

apport - symbol displayed if there are pending crash reports; {!} symbol displayed on the lower bar toward the left, in black on an orange background

arch - system architecture; displayed on the lower bar toward the left, in the default text color on the default background color

battery - battery information; display on the lower bar toward the right; - indicates discharging, + indicates charging, = indicates fully charged; when charging or discharging, the current battery capacity as a percentage is displayed; the colours green, yellow, and red are used to give further indication of the battery's charge state; you may override the detected battery by setting BATTERY=/proc/acpi/battery/BAT0 in $BYOBU_CONFIG_DIR/statusrc

cpu_count - the number of cpu's or cores on the system; displayed in the lower bar toward the right in the default text color on the default background, followed by a trailing 'x'

cpu_freq - the current frequency of the cpu in GHz; displayed in the lower bar toward the right in white text on a light blue background

cpu_temp - the cpu temperature in Celsius (default) or Fahrenheit, configure TEMP=F or TEMP=C in $BYOBU_CONFIG_DIR/statusrc; displayed in the lower bar toward the right in yellow text on a black background; you may override the detected cpu temperature device by setting MONITORED_TEMP=/proc/acpi/whatever in $BYOBU_CONFIG_DIR/statusrc

custom - user defined custom scripts; must be executable programs of any kind in $BYOBU_CONFIG_DIR/bin; must be named N_NAME, where N is the frequency in seconds to refresh the status indicator, and NAME is the name of the script; N should not be less than 5 seconds; the script should echo a small amount of text to standard out, standard error is discarded; the indicator will be displayed in the lower panel, in default colors, unless you manually specify the colors in your script's output; BEWARE, cpu-intensive custom scripts may impact your overall system performance and could upset your system administrator! In fact, you can easily copy and modify any status script usually found in /usr/lib/byobu/* to your local $HOME/.byobu/ directory.
  Example: $BYOBU_CONFIG_DIR/bin/1000_uname
    #!/bin/sh
    printf "\005{= bw}%s\005{-}" "$(uname -r)"

date - the system date in YYYY-MM-DD format, or you can set this to any valid strftime(3) you like in $BYOBU_CONFIG_DIR/datetime; displayed in the lower on the far right in the default text color on the default background

disk - total disk space available and total used on / directory; displayed in the lower bar on the far right in white text on a light purple background; override the default directory by specifying an alternate mount point with MONITORED_DISK=/wherever in $BYOBU_CONFIG_DIR/statusrc

disk_io - instantaneous read/write througput in kB/s or MB/s over the last 3 seconds; displayed in the lower bar toward the right in white text on a light purple background with a leading '<' sign indicating 'read speed' and '>' sign indicating 'write speed'; override the default monitored disk by specifying an alternate device with MONITORED_DISK=/dev/sdb, and override the default DISK_IO_THRESHOLD=50 (kB/s) in $BYOBU_CONFIG_DIR/statusrc

distro - OS/distribution name of the release running on the current system as reported by lsb_release(1) or /etc/issue; displayed in the lower bar in bold black text toward the left on a grey background; you may override the detected release with DISTRO=Whatever in $BYOBU_CONFIG_DIR/statusrc

ec2_cost - an estimation of the cost of the current boot of the system in terms of the Amazon EC2 billing model; displayed in the lower bar toward the right in green text on a black background; the monetary units are US Dollars '$'; this plugin only works when an AWS-compatible metadata server is available at http://169.254.169.254

entropy - a count of the system's current entropy in bytes; displayed in the lower bar toward the right in yellow text on a dark grey background; there is a leading 'e' to indicate 'entropy'

raid - note very prominently if there is a RAID failure detected, in red blinking text on a white background; the term 'RAID' notes that there is something wrong with the RAID, and if there is a rebuild/resync in progress, the percent complete is also shown

rcs_cost - an estimation of the cost of the current boot of the system in terms of the Rackspace Cloud Server billing model; displayed in the lower bar toward the right in green text on a black background; there is a leading '~' to indicate that this is an estimation, and the monetary units are US Dollars '$'

fan_speed - cpu or system fan speed as reported by lm-sensors; displayed in the lower bar toward the right in black text on a grey background; there is a trailing 'rpm' for units; you may override the detected fan by setting FAN=/sys/path/to/your/fan1_input in $BYOBU_CONFIG_DIR/statusrc

hostname - the hostname of the system; displayed in the upper bar on the far right in bold black text on a grey background; there is a leading '@' symbol if the username status is also enabled

ip_address - the IPv4 address of the system in dotted decimal form; displayed in the upper bar on the far right in bold black text on a grey background; you can override and display your IPv6 address by setting 'IPV6=1', and you can show your external ip address by setting 'IP_EXTERNAL=1' in $BYOBU_CONFIG_DIR/statusrc

ip_address4 - the IPv4 address of the system in dotted decimal form; displayed in the upper bar on the far right in bold black text on a grey background; you can show your external ip address by setting 'IP_EXTERNAL=1' in $BYOBU_CONFIG_DIR/statusrc

ip_address6 - the IPv6 address of the system; displayed in the upper bar on the far right in bold black text on a grey background; you can show your external ip address by setting 'IP_EXTERNAL=1' in $BYOBU_CONFIG_DIR/statusrc

load_average - the system load average over the last 1 minute; displayed in the lower bar toward the right in black text on a yellow background

logo - an approximation of the current operating system's logo; displayed in the lower bar on the far left; you may customize this logo by setting a chosen logo in $BYOBU_CONFIG_DIR/logo, or you may override this with LOGO=:-D in $BYOBU_CONFIG_DIR/statusrc

mail - system mail for the current user; the letter '[M]' is displayed in the lower bar toward the left in black text on a grey background

memory - total memory available and used percentage in the system; displayed in the lower bar toward the right in white text on a green background

menu - a simple indicator directing new users to use the F9 keybinding to access the byobu menu

network - instantaneous upload/download bandwidth in [GMk]bps over the last 3 seconds; nothing is displayed if traffic is 0; displayed in the lower bar toward the left in white text on a purple background with a leading '^' sign indicating 'up' and 'v' sign indicating 'down'; override the default interface by specifying an alternate interface with MONITORED_NETWORK=eth1, and override the default units (bits) with NETWORK_UNITS=bytes, and override the default NETWORK_THRESHOLD=20 (kbps) in $BYOBU_CONFIG_DIR/statusrc

notify_osd - Send on-screen notification messages to screen's notification buffer

processes - total number of processes running on the system; displayed in the lower bar in white text on a dark yellow background with a trailing '&' indicating 'background processes'

reboot_required - symbol present if a reboot is required following a system update; displayed in the lower bar white text on a blue background by the symbol '(R)'; additionally, reboot_required will print '<F5>' in white text on a blue background, if Byobu requires you to reload your profile to affect some changes; it will also detect if your system is currently in powernap(8) state and if so print '.zZ'.

release - OS/distribution name of the release running on the current system as reported by lsb_release(1) or /etc/issue; displayed in the lower bar in bold black text toward the left on a grey background; you may override the detected release with RELEASE=Whatever in $BYOBU_CONFIG_DIR/statusrc; you may also abbreviate the release string to N characters by setting RELEASE_ABBREVIATED=N in $BYOBU_CONFIG_DIR/statusrc

services - users can configure a list of services to monitor, define the SERVICES variable in $BYOBU_CONFIG_DIR/statusrc, a whitespace separated of services, each service should include the init name of the service, then a pipe, and then an abbreviated name or symbol to display when running (e.g. SERVICES="ssh|ssh apache2|http"); displayed in the lower bar toward the center in cyan on a white background

session - byobu session name (only supported in byobu-tmux(1)); displayed in the lower bar on the left in underlined black text on a white background

swap - total swap space and total used as a percentage of the total available; displayed in the lower bar toward the right in white text on a light green background with a trailing '%' sign

time - the system time in HH:MM:SS format (by default), or you can set this to any valid strftime(3) you like in $BYOBU_CONFIG_DIR/datetime; displayed in the lower bar on the far right in the default text and default background colors

time_binary - only for the hard core geek, the local system time in binary; requires UTF-8 support in a VERY recent version of GNU Screen; displayed in the lower bar on the far right in the default text and background colors

time_utc - the UTC system time in HH:MM format; displayed in the lower bar on the far right in dark text on a light background

updates_available - the number of updates available on the system; displayed in the lower bar toward the right in white text on a red background with a trailing '!' sign; if any updates are marked 'security updates', then there will be a total of two trailing exclamation points, '!!'

uptime - the total system uptime since last boot; displayed in the lower bar toward the right in blue text on a grey background

users - the number of remote users logged into the system via sshd, empty if 0 users; displayed in the lower bar toward the right in red text on a grey background with a trailing '#' sign; set USERS_DISTINCT=1 to instead count the number of distinct users logged into the system (rather than open ssh sessions)

whoami - the name of the user who owns the screen session; displayed in the upper bar toward the far right in bold black text on a grey background

wifi_quality - the connection rate and signal quality of the wifi connection; displayed in the lower bar toward the right in black text on a cyan background; the connection rate is in 'Mb/s' and the signal quality is as a percentage with a trailing '%'; override the default interface by specifying an alternate interface with MONITORED_NETWORK=wlan0 in $BYOBU_CONFIG_DIR/statusrc

SESSIONS

Byobu name screen sessions "byobu", if unspecified. To hide sessions from byobu-select-session(1), prepend a "." to the beginning of the session name, like:

 byobu -S .hidden

WINDOWS

Each open window in the screen session is displayed in the upper bar toward the far left. These are numbered, and include indicators as to activity in the window (see "activity" in screen(1) and tmux(1) for symbol definitions). The current active window is highlighted by inverting the background/text from the rest of the window bar.

Users can create a list of windows to launch at startup in $BYOBU_CONFIG_DIR/windows and $BYOBU_CONFIG_DIR/windows.tmux. This file is the same syntax as ~/.screenrc and ~/.tmuxrc, each line specifying a window, as described in screen(1) or tmux(1).

User can also launch Byobu with unique window sets. Users can store these as $BYOBU_CONFIG_DIR/windows.[NAME] and $BYOBU_CONFIG_DIR/windows.tmux.[NAME], and launch Byobu with the environment variable BYOBU_WINDOWS=NAME.

For example:
  $ cat $BYOBU_CONFIG_DIR/windows.ssh_sessions
  screen -t localhost bash
  screen -t aussie ssh root@aussie
  screen -t beagle ssh root@beagle
  screen -t collie ssh root@collie
  $ BYOBU_WINDOWS=ssh_sessions byobu

For example:
  $ cat $BYOBU_CONFIG_DIR/windows.tmux.split4
  new-session 'bash' ;
  split-window ;
  split-window ;
  split-window ;
  select-layout tiled ;
  select-pane -t 0
  $ BYOBU_WINDOWS=split4 byobu

UNITS OF MEASURE

byobu uses binary for capacity measurements of KB, MB, GB, and TB. This means multiples of 1024 rather than multiples of 1000, in accordance with JEDEC Standard 100B.01 for disk and memory capacity measurements. See:
 * http://en.wikipedia.org/wiki/JEDEC_memory_standards

byobu uses decimal for measurements of network data transfer, meaning multiple of 1000, rather than 1024. See:
 * http://en.wikipedia.org/wiki/Data_rate_units

KEYBINDINGS

byobu keybindings can be user defined in /usr/share/byobu/keybindings/ (or within .screenrc if byobu-export was used). The common key bindings are:

F2 - Create a new window

F3 - Move to previous window

F4 - Move to next window

F5 - Reload profile

F6 - Detach from this session

F7 - Enter copy/scrollback mode

F8 - Re-title a window

F9 - Configuration Menu

F12 - Lock this terminal

shift-F2 - Split the screen horizontally

ctrl-F2 - Split the screen vertically

shift-F3 - Shift the focus to the previous split region

shift-F4 - Shift the focus to the next split region

shift-F5 - Join all splits

ctrl-F6 - Remove this split

ctrl-F5 - Reconnect GPG and SSH sockets

shift-F6 - Detach, but do not logout

alt-pgup - Enter scrollback mode

alt-pgdn - Enter scrollback mode

Ctrl-a $ - show detailed status

Ctrl-a R - Reload profile

Ctrl-a ! - Toggle key bindings on and off

Ctrl-a k - Kill the current window

Ctrl-a ~ - Save the current window's scrollback buffer

SCROLLBACK, COPY, PASTE MODES

Each window in Byobu has up to 10,000 lines of scrollback history, which you can enter and navigate using the alt-pgup and alt-pgdn keys. Exit this scrollback mode by hitting enter. You can also easily copy and paste text from scrollback mode. To do so, enter scrollback using alt-pgup or alt-pgdn, press the spacebar to start highlighting text, use up/down/left/right/pgup/pgdn to select the text, and press enter to copy the text. You can then paste the text using alt-insert or ctrl-a-].

AUTHOR

This manpage and the utility were written by Dustin Kirkland <[email protected]> for Ubuntu systems (but may be used by others). Permission is granted to copy, distribute and/or modify this document and the utility under the terms of the GNU General Public License, Version 3 published by the Free Software Foundation.

The complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL on Debian/Ubuntu systems, or in /usr/share/doc/fedora-release-*/GPL on Fedora systems, or on the web at http://www.gnu.org/licenses/gpl.txt.