SYNOPSIS

use Cflow;
Cflow::verbose(1);
Cflow::find(\&wanted, <*.flows*>);
sub wanted { ... }

or:

   Cflow::find(\&wanted, \&perfile, <*.flows*>);
   sub perfile { 
      my $fname = shift;
      ...
   }

BACKROUND

This module implements an API for processing IP flow accounting information which as been collected from routers and written into flow files by one of the various flow collectors listed below.

It was originally conceived and written for use by FlowScan:

   http://net.doit.wisc.edu/~plonka/FlowScan/

Flow File Sources

This package is of little use on its own. It requires input in the form of time-stamped raw flow files produced by other software packages. These ``flow sources'' either snoop a local ethernet (via libpcap) or collect flow information from IP routers that are configured to export said information. The following flow sources are supported:

argus by Carter Bullard:

   http://www.qosient.com/argus/

flow-tools by Mark Fullmer (with NetFlow v1, v5, v6, or v7):

   http://www.splintered.net/sw/flow-tools/

CAIDA's cflowd (with NetFlow v5):

   http://www.caida.org/tools/measurement/cflowd/
   http://net.doit.wisc.edu/~plonka/cflowd/

lfapd by Steve Premeau (with LFAPv4):

   http://www.nmops.org/

DESCRIPTION

Cflow::find() will iterate across all the flows in the specified files. It will call your wanted() function once per flow record. If the file name argument passed to find() is specified as ``-'', flows will be read from standard input.

The wanted() function does whatever you write it to do. For instance, it could simply print interesting flows or it might maintain byte, packet, and flow counters which could be written to a database after the find subroutine completes.

Within your wanted() function, tests on the ``current'' flow can be performed using the following variables:

$Cflow::unix_secs

secs since epoch (deprecated)

$Cflow::exporter

Exporter IP Address as a host-ordered ``long''

$Cflow::exporterip

Exporter IP Address as dotted-decimal string

$Cflow::localtime

$Cflow::unix_secs interpreted as localtime with this strftime(3) format:

   %Y/%m/%d %H:%M:%S

$Cflow::srcaddr

Source IP Address as a host-ordered ``long''

$Cflow::srcip

Source IP Address as a dotted-decimal string

$Cflow::dstaddr

Destination IP Address as a host-ordered ``long''

$Cflow::dstip

Destination IP Address as a dotted-decimal string

$Cflow::input_if

Input interface index

$Cflow::output_if

Output interface index

$Cflow::srcport

TCP/UDP src port number or equivalent

$Cflow::dstport

TCP/UDP dst port number or equivalent

$Cflow::ICMPType

high byte of $Cflow::dstport

Undefined if the current flow is not an ICMP flow.

$Cflow::ICMPCode

low byte of $Cflow::dstport

Undefined if the current flow is not an ICMP flow.

$Cflow::ICMPTypeCode

symbolic representation of $Cflow::dstport

The value is a the type-specific ICMP code, if any, followed by the ICMP type. E.g.

   ECHO
   HOST_UNREACH

Undefined if the current flow is not an ICMP flow.

$Cflow::pkts

Packets sent in Duration

$Cflow::bytes

Octets sent in Duration

$Cflow::nexthop

Next hop router's IP Address as a host-ordered ``long''

$Cflow::nexthopip

Next hop router's IP Address as a dotted-decimal string

$Cflow::startime

secs since epoch at start of flow

$Cflow::start_msecs

fractional portion of startime (in milliseconds)

This will be zero unless the source is flow-tools or argus.

$Cflow::endtime

secs since epoch at last packet of flow

$Cflow::end_msecs

fractional portion of endtime (in milliseconds)

This will be zero unless the source is flow-tools or argus.

$Cflow::protocol

IP protocol number (as is specified in /etc/protocols, i.e. 1=ICMP, 6=TCP, 17=UDP, etc.)

$Cflow::tos

IP Type-of-Service

$Cflow::tcp_flags

bitwise OR of all TCP flags that were set within packets in the flow; 0x10 for non-TCP flows

$Cflow::TCPFlags

symbolic representation of $Cflow::tcp_flags The value will be a bitwise-or expression. E.g.

   PUSH|SYN|FIN|ACK

Undefined if the current flow is not a TCP flow.

$Cflow::raw

the entire ``packed'' flow record as read from the input file

This is useful when the ``wanted'' subroutine wants to write the flow to another FILEHANDLE. E.g.:

   syswrite(FILEHANDLE, $Cflow::raw, length $Cflow::raw)

$Cflow::reraw

the entire ``re-packed'' flow record formatted like $Cflow::raw.

This is useful when the ``wanted'' subroutine wants to write a modified flow to another FILEHANDLE. E.g.:

   $srcaddr = my_encode($srcaddr);
   $dstaddr = my_encode($dstaddr);
   syswrite(FILEHANDLE, $Cflow::reraw, length $Cflow::raw)

These flow variables are packed into $Cflow::reraw:

   $Cflow::index, $Cflow::exporter,
   $Cflow::srcaddr, $Cflow::dstaddr,
   $Cflow::input_if, $Cflow::output_if,
   $Cflow::srcport, $Cflow::dstport,
   $Cflow::pkts, $Cflow::bytes,
   $Cflow::nexthop,
   $Cflow::startime, $Cflow::endtime,
   $Cflow::protocol, $Cflow::tos,
   $Cflow::src_as, $Cflow::dst_as,
   $Cflow::src_mask, $Cflow::dst_mask,
   $Cflow::tcp_flags,
   $Cflow::engine_type, $Cflow::engine_id

$Cflow::Bps

the minimum bytes per second for the current flow

$Cflow::pps

the minimum packets per second for the current flow

The following variables are undefined if using NetFlow v1 (which does not contain the requisite information):

$Cflow::src_as

originating or peer AS of source address

$Cflow::dst_as

originating or peer AS of destination address

The following variables are undefined if using NetFlow v1 or LFAPv4 (which do not contain the requisite information):

$Cflow::src_mask

source address prefix mask bits

$Cflow::dst_mask

destination address prefix mask bits

$Cflow::engine_type

type of flow switching engine

$Cflow::engine_id

ID of the flow switching engine

Optionally, a reference to a perfile() function can be passed to Cflow::find as the argument following the reference to the wanted() function. This perfile() function will be called once for each flow file. The argument to the perfile() function will be name of the flow file which is about to be processed. The purpose of the perfile() function is to allow you to periodically report the progress of Cflow::find() and to provide an opportunity to periodically reclaim storage used by data objects that may have been allocated or maintained by the wanted() function. For instance, when counting the number of active hosts IP addresses in each time-stamped flow file, perfile() can reset the counter to zero and clear the search tree or hash used to remember those IP addresses.

Since Cflow is an Exporter, you can request that all those scalar flow variables be exported (so that you need not use the ``Cflow::'' prefix):

   use Cflow qw(:flowvars);

Also, you can request that the symbolic names for the TCP flags, ICMP types, and/or ICMP codes be exported:

   use Cflow qw(:tcpflags :icmptypes :icmpcodes);

The tcpflags are:

   $TH_FIN $TH_SYN $TH_RST $TH_PUSH $TH_ACK $TH_URG

The icmptypes are:

   $ICMP_ECHOREPLY     $ICMP_DEST_UNREACH $ICMP_SOURCE_QUENCH
   $ICMP_REDIRECT      $ICMP_ECHO         $ICMP_TIME_EXCEEDED
   $ICMP_PARAMETERPROB $ICMP_TIMESTAMP    $ICMP_TIMESTAMPREPLY
   $ICMP_INFO_REQUEST  $ICMP_INFO_REPLY   $ICMP_ADDRESS
   $ICMP_ADDRESSREPLY

The icmpcodes are:

   $ICMP_NET_UNREACH  $ICMP_HOST_UNREACH $ICMP_PROT_UNREACH
   $ICMP_PORT_UNREACH $ICMP_FRAG_NEEDED  $ICMP_SR_FAILED
   $ICMP_NET_UNKNOWN  $ICMP_HOST_UNKNOWN $ICMP_HOST_ISOLATED
   $ICMP_NET_ANO      $ICMP_HOST_ANO     $ICMP_NET_UNR_TOS
   $ICMP_HOST_UNR_TOS $ICMP_PKT_FILTERED $ICMP_PREC_VIOLATION
   $ICMP_PREC_CUTOFF  $ICMP_UNREACH      $ICMP_REDIR_NET
   $ICMP_REDIR_HOST   $ICMP_REDIR_NETTOS $ICMP_REDIR_HOSTTOS
   $ICMP_EXC_TTL      $ICMP_EXC_FRAGTIME

Please note that the names above are not necessarily exactly the same as the names of the flags, types, and codes as set in the values of the aforemented $Cflow::TCPFlags and $Cflow::ICMPTypeCode flow variables.

Lastly, as is usually the case for modules, the subroutine names can be imported, and a minimum version of Cflow can be specified:

   use Cflow qw(:flowvars find verbose 1.031);

Cflow::find() returns a ``hit-ratio''. This hit-ratio is a string formatted similarly to that of the value of a perl hash when taken in a scalar context. This hit-ratio indicates ((# of ``wanted'' flows) / (# of scanned flows)). A flow is considered to have been ``wanted'' if your wanted() function returns non-zero.

Cflow::verbose() takes a single scalar boolean argument which indicates whether or not you wish warning messages to be generated to STDERR when ``problems'' occur. Verbose mode is set by default.

EXAMPLES

Here's a complete example with a sample wanted function. It will print all UDP flows that involve either a source or destination port of 31337 and port on the other end that is unreserved (greater than 1024):

   use Cflow qw(:flowvars find);
   my $udp = getprotobyname('udp');
   verbose(0);
   find(\&wanted, @ARGV? @ARGV : <*.flows*>);
   sub wanted {
      return if ($srcport < 1024 || $dstport < 1024);
      return unless (($srcport == 31337 || $dstport == 31337) &&
                      $udp == $protocol);
      printf("%s %15.15s.%-5hu %15.15s.%-5hu %2hu %10u %10u\n",
             $localtime,
             $srcip,
             $srcport,
             $dstip,
             $dstport,
             $protocol,
             $pkts,
             $bytes)
   }

Here's an example which demonstrates a technique which can be used to pass arbitrary arguments to your wanted function by passing a reference to an anonymous subroutine as the wanted() function argument to Cflow::find():

   sub wanted {
      my @params = @_;
      # ...
   }
   Cflow::find(sub { wanted(@params) }, @files);

ARGUS NOTES

Argus uses a bidirectional flow model. This means that some argus flows represent packets not only in the forward direction (from ``source'' to ``destination''), but also in the reverse direction (from the so-called ``destination'' to the ``source''). However, this module uses a unidirection flow model, and therfore splits some argus flows into two unidirectional flows for the purpose of reporting.

Currently, using this module's API there is no way to determine if two subsequently reported unidirectional flows were really a single argus flow. This may be addressed in a future release of this package.

Furthermore, for argus flows which represent bidirectional ICMP traffic, this module presumes that all the reverse packets were ECHOREPLYs (sic). This is sometimes incorrect as described here:

   http://www.theorygroup.com/Archive/Argus/2002/msg00016.html

and will be fixed in a future release of this package.

Timestamps ($startime and $endtime) are sometimes reported incorrectly for bidirectional argus flows that represent only one packet in each direction. This will be fixed in a future release.

Argus flows sometimes contain information which does not map directly to the flow variables presented by this module. For the time being, this information is simply not accessible through this module's API. This may be addressed in a future release.

Lastly, argus flows produced from observed traffic on a local ethernet do not contain enough information to meaningfully set the values of all this module's flow variables. For instance, the next-hop and input/output ifIndex numbers are missing. For the time being, all argus flows accessed throught this module's API will have both the $input_if and $output_if as 42. Althought 42 is the answer to life, the universe, and everthing, in this context, it is just an arbitrary number. It is important that $output_if is non-zero, however, since existing FlowScan reports interpret an $output_if value of zero to mean that the traffic represented by that flow was not forwarded (i.e. dropped). For similar reasons, the $nexthopip for all argus flows is reported as ``127.0.0.1''.

   open "-": No such file or directory

   not Argus-2.0 data stream.

   http://net.doit.wisc.edu/~plonka/cflowd/

NOTES

The interface presented by this package is a blatant ripoff of File::Find.

AUTHOR

Dave Plonka <[email protected]>

Copyright (C) 1998-2002 Dave Plonka. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

VERSION

The version number is the module file RCS revision number ($Revision: 1.51 $) with the minor number printed right justified with leading zeroes to 3 decimal places. For instance, RCS revision 1.1 would yield a package version number of 1.001.

This is so that revision 1.10 (which is version 1.010), for example, will test greater than revision 1.2 (which is version 1.002) when you want to require a minimum version of this module.