SYNOPSIS

dncopy [options] source dest
dncopy [options] source... directory
dntype source...
Options:
[-vdisklEVh] [-m mode] [-a record attributes] [-r record format] [-b block size] [-p VMS protection]

DESCRIPTION

dncopy copies files to and from VMS systems.

Files on VMS systems should be specified in the usual transparent DECnet format of node"username password"::[directory]file. To protect quotes and dollar signs from shell expansion I recommend that all VMS file specifications be enclosed in single quotes (see EXAMPLES below). If you don't want to type the password on the command-line then put a hyphen ("-") in its place and you will be prompted for it.

dncopy can copy single files and multiple files. If multiple files are copied the destination must be a directory but it may be on the local Linux system or a VMS system. The files to be copied can be a mixture of VMS files and local files (yes, you can copy from VMS to VMS with this program, though quite why you would want to I'm not sure)

Wildcards are supported for local and VMS files (of course local wildcards are expanded by the shell). Remember to use VMS wildcards (*%) on VMS filesystems and Unix wildcards (*? etc) on Unix files.

The pseudo-filename '-' may be used to represent standard input or standard output to enable dncopy to be used in a pipeline. Filenames are changed to lower case when copied from VMS to Linux.

The environment DNCOPY_OPTIONS may be used to provide a default set of options for copying files. If (for example) you wanted to normally send files as blocks rather than records you could set DNCOPY_OPTIONS="-mblock". Then, to send a file as records you would need to type dncopy -mrecord myfile.txt vmsbox:: instead.
Options in DNCOPY_OPTIONS may be overridden by options typed on the command-line except where there is no negating option available (see -k -d -i ). If you put these options in DNCOPY_OPTIONS then to remove them you will have to override the whole environment variable eg:
$ DNCOPY_OPTIONS="" dncopy myfile.txt vmsbox::

dntype is simply a version of dncopy where the output file is forced to "-". Thus it takes all the same options as dncopy. It is merely a convenience.

OPTIONS

-v

Verbose operation. The more -v options are present the more verbose dncopy will become. One -v is roughly equivalent to the /LOG qualifier on the DCL copy command. More than one is really just useful for debugging.

-i

Interactive operation. Prompts before copying a file. This option is roughly equivalent to the /CONFIRM qualifier on the DCL copy command.

-l

Ignore interlocks on files copied from VMS. This will do its best to read the data regardless of record or file locking, but it won't always succeed.

-s

Show transfer statistics. This shows the throughput of all copies (in the case of wildcard transfers) undertaken in K bytes/second. This time does not include that to establish the connection. eg when sending to VMS the overhead of creating a NETSERVER process is not included.

-k

Keep version numbers on files copied from VMS systems. By default dncopy will strip the version number from files because they have no meaning in Linux. if you specify -k on the command line then the VMS file will be created with exactly the same name as it had on the VMS system. To access these files under Linux you will need to enclose them in quotes. eg less "vmsfile.txt;1".

-m {record|block}

Sets the transfer mode to block or record. record is the default. Normally record is what you want but block is used for sending binary files to the VMS system. Note that if you use -mblock to pull files from VMS you may not be able to make sense of the file on Linux because dncopy will also pull all the VMS internal structuring of the file as well as the data. Unless you really know what you are doing -mblock is only really useful for sending files.

-a {none|ftn|cr|prn}

Sets the carriage control attributes for files copied to a VMS system. The default is cr.

-r {fix|var|vfc|stm}

Sets the record format for files copied to a VMS system. The default is stm. In fact the default is STREAMLF as this corresponds to the format of files on Unix systems and so is the least likely to result in file corruption. If you are sending a pure text file then var or vfc may be more appropriate for your application. fix may be useful for block-structures files and data files.

-b N

Set the block size for transfers. The default is high enough for all record structured files. if you are sending a file with -mblock then you should use this to set the block size of the file to be created at the VMS end. When sending block files the default changes to 512 as this is typically what you would want (I hope).

-d

Remove any trailing CR characters at the end of a line. This is useful for sending DOS files to VMS. Only works when transferring in record mode.

-p 'protection'

When sending files to VMS, sets the protection of the newly created remote file. Without this option, VMS will set the protection to be the default for the remote user. The protection should be in VMS-style format and enclosed in single quotes to protect it from the shell (see example).
This option is ignored when copying from VMS.

-P

Queue the file for printing to SYS$PRINT when it arrives at the VMS end.

-D

Delete the file when it is closed. This is only really useful in conjunction with -P.

-T connect timeout

Specifies the maximum amount of time the command will wait to establish a connection with the remote node. a 0 here will cause it to wait forever. The default is 60 seconds

-E

Ignore errors opening output files. This is handy if you are sending a lot of Unix files to VMS, some of which have illegal filenames (eg ~ backup files). dncopy will report an error for each file but continue sending.

-h -?

Displays help for using the command.

-V

Show the version of the tools package that dncopy comes from.

EXAMPLES

Copy LOGIN.COM from the VMS system "tramp" to Linux as mylogin.com

    dncopy 'tramp"christine pjc123"::login.com' mylogin.com





Copy all .TXT files from the VMS directory SYS$SYSDEVICE:[WP] to /tmp:


    dncopy 'tramp"christine pjc123"::sys$sysdevice:[wp]*.txt' /tmp





Copy an executable to VMS:


    dncopy -mblock test.exe 'tramp"christine pjc123"::[.BIN]'






Copy a file to VMS and set its protection


    dncopy secret.dat  marsha:: -p (s:, o:rwed, g:re, w:)'







Display the contents of LOGIN.COM:


    dtype 'trisha"christine -"::login.com'


    You will then be prompted for a password

HELPFUL HINTS

For fetching files the defaults should serve for most purposes. Most VMS files are record orientated and -mrecord is the default transfer mode. It is rare you will need to fetch files using -mblock because you will get all the record control information downloaded too and that probably isn't any use to you.

Sending files is more complex because VMS supports far more attributes than Linux so you will need to know something about the file you are sending. Text files should be OK with the defaults unless you need to change the format from the default STREAMLF to VFC or VAR. Carriage control can also be specified if you want to be that picky.

Binary files may often need to be sent -mblock to be useful at the VMS end, You will probably want to specify a block size with the -b option. The default is 512 which is fairly useful but if you are sending (say) a saveset 8192 or 32256 may be required. Trial-and-error may be the only way in some cases unless you know the file contents very well. If you really don't know what to do, just send it -mblock and use the set file/attr command to massage it on the VMS end until you are happy with it. (If you are using VMS earlier than 6.1 then you will need the freeware FILE utility to do this)