DESCRIPTION
fence_ibmblade is an I/O Fencing agent which can be used with IBM BladeCenter chassis. It issues SNMP Set request to BladeCenter chassis, rebooting, powering up or down the specified Blade Server.
fence_ibmblade accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ibmblade can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.
Vendor URL: http://www.ibm.com
PARAMETERS
- -o, --action=[action]
-
Fencing action (Default Value: reboot)
- -c, --community=[community]
-
Set the community string
- -4, --inet4-only
-
Forces agent to use IPv4 addresses only
- -6, --inet6-only
-
Forces agent to use IPv6 addresses only
- -a, --ip=[ip]
-
IP address or hostname of fencing device This parameter is always required.
- -u, --ipport=[port]
-
TCP/UDP port to use for connection with device (Default Value: 161)
- -l, --username=[name]
-
Login name
- -p, --password=[password]
-
Login password or passphrase
- -S, --password-script=[script]
-
Script to run to retrieve password
- -n, --plug=[id]
-
Physical plug number on device, UUID or identification of machine This parameter is always required.
- -b, --snmp-auth-prot=[prot]
-
Set authentication protocol (MD5|SHA)
- -P, --snmp-priv-passwd=[pass]
-
Set privacy protocol password
- -R, --snmp-priv-passwd-script
-
Script to run to retrieve privacy password
- -B, --snmp-priv-prot=[prot]
-
Set privacy protocol (DES|AES)
- -E, --snmp-sec-level=[level]
-
Set security level (noAuthNoPriv|authNoPriv|authPriv)
- -d, --snmp-version=[version]
-
Specifies SNMP version to use (1|2c|3) (Default Value: 1)
- -v, --verbose
-
Verbose mode
- -D, --debug-file=[debugfile]
-
Write debug information to given file
- -V, --version
-
Display version information and exit
- -h, --help
-
Display help and exit
- -C, --separator=[char]
-
Separator for CSV created by 'list' operation (Default Value: ,)
- --delay=[seconds]
-
Wait X seconds before fencing is started (Default Value: 0)
- --login-timeout=[seconds]
-
Wait X seconds for cmd prompt after login (Default Value: 5)
- --power-timeout=[seconds]
-
Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
-
Wait X seconds after issuing ON/OFF (Default Value: 0)
- --shell-timeout=[seconds]
-
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --retry-on=[attempts]
-
Count of attempts to retry power on (Default Value: 1)
- --snmpget-path=[path]
-
Path to snmpget binary (Default Value: /usr/bin/snmpget)
- --snmpset-path=[path]
-
Path to snmpset binary (Default Value: /usr/bin/snmpset)
- --snmpwalk-path=[path]
-
Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk)
ACTIONS
- on
-
Power on machine.
- off
-
Power off machine.
- reboot
-
Reboot machine.
- status
-
This returns the status of the plug/virtual machine.
- list
-
List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
- list-status
-
List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.
- monitor
-
Check the health of fence device
- metadata
-
Display the XML metadata describing this resource.
- validate-all
-
Validate if all required parameters are entered.
STDIN PARAMETERS
- action
-
Fencing action (Default Value: reboot)
- community
-
Set the community string
- inet4_only
-
Forces agent to use IPv4 addresses only
- inet6_only
-
Forces agent to use IPv6 addresses only
- ipaddr
-
IP address or hostname of fencing device This parameter is always required.
- ipport
-
TCP/UDP port to use for connection with device (Default Value: 161)
- login
-
Login name
- passwd
-
Login password or passphrase
- passwd_script
-
Script to run to retrieve password
- port
-
Physical plug number on device, UUID or identification of machine This parameter is always required.
- snmp_auth_prot
-
Set authentication protocol (MD5|SHA)
- snmp_priv_passwd
-
Set privacy protocol password
- snmp_priv_passwd_script
-
Script to run to retrieve privacy password
- snmp_priv_prot
-
Set privacy protocol (DES|AES)
- snmp_sec_level
-
Set security level (noAuthNoPriv|authNoPriv|authPriv)
- snmp_version
-
Specifies SNMP version to use (1|2c|3) (Default Value: 1)
- verbose
-
Verbose mode
- debug
-
Write debug information to given file
- version
-
Display version information and exit
- help
-
Display help and exit
- separator
-
Separator for CSV created by 'list' operation (Default Value: ,)
- delay
-
Wait X seconds before fencing is started (Default Value: 0)
- login_timeout
-
Wait X seconds for cmd prompt after login (Default Value: 5)
- power_timeout
-
Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
-
Wait X seconds after issuing ON/OFF (Default Value: 0)
- shell_timeout
-
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- retry_on
-
Count of attempts to retry power on (Default Value: 1)
- snmpget_path
-
Path to snmpget binary (Default Value: /usr/bin/snmpget)
- snmpset_path
-
Path to snmpset binary (Default Value: /usr/bin/snmpset)
- snmpwalk_path
-
Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk)