VERSION

This document describes version 0.30 of File::Write::Rotate (from Perl distribution File-Write-Rotate), released on 2016-06-06.

SYNOPSIS

use File::Write::Rotate;
my $fwr = File::Write::Rotate->new(
dir => '/var/log', # required
prefix => 'myapp', # required
#suffix => '.log', # default is ''
size => 25*1024*1024, # default is 10MB, unless period is set
histories => 12, # default is 10
#buffer_size => 100, # default is none
);
# write, will write to /var/log/myapp.log, automatically rotate old log files
# to myapp.log.1 when myapp.log reaches 25MB. will keep old log files up to
# myapp.log.12.
$fwr->write("This is a line\n");
$fwr->write("This is", " another line\n");

To compressing old log files:

 $fwr->compress;

This is usually done in a separate process, because it potentially takes a long time if the files to compress are large; we are rotating automatically in write() so doing automatic compression too would annoyingly block writer for a potentially long time.

DESCRIPTION

This module can be used to write to file, usually for logging, that can rotate itself. File will be opened in append mode. By default, locking will be done to avoid conflict when there are multiple writers. Rotation can be done by size (after a certain size is reached), by time (daily/monthly/yearly), or both.

I first wrote this module for logging script STDERR output to files (see Tie::Handle::FileWriteRotate).

ATTRIBUTES

buffer_size => int

Get or set buffer size. If set to a value larger than 0, then when a write() failed, instead of dying, the message will be stored in an internal buffer first (a regular Perl array). When the number of items in the buffer exceeds this size, then write() will die upon failure. Otherwise, every write() will try to flush the buffer.

Can be used for example when a program runs as superuser/root then temporarily drops privilege to a normal user. During this period, logging can fail because the program cannot lock the lock file or write to the logging directory. Before dropping privilege, the program can set buffer_size to some larger-than-zero value to hold the messages emitted during dropping privilege. The next write() as the superuser/root will succeed and flush the buffer to disk (provided there is no other error condition, of course).

path => str (ro)

Current file's path.

handle => (ro)

Current file handle. You should not use this directly, but use write() instead. This attribute is provided for special circumstances (e.g. in hooks, see example in the hook section).

hook_before_write => code

Will be called by write() before actually writing to filehandle (but after locking is done). Code will be passed ($self, \@msgs, $fh) where @msgs is an array of strings to be written (the contents of buffer, if any, plus arguments passed to write()) and $fh is the filehandle.

hook_before_rotate => code

Will be called by the rotating routine before actually doing rotating. Code will be passed ($self).

This can be used to write a footer to the end of each file, e.g.:

 # hook_before_rotate
 my ($self) = @_;
 my $fh = $self->handle;
 print $fh "Some footer\n";

Since this hook is indirectly called by write(), locking is already done.

hook_after_rotate => code

Will be called by the rotating routine after the rotating process. Code will be passed ($self, \@renamed, \@deleted) where @renamed is array of new filenames that have been renamed, @deleted is array of new filenames that have been deleted.

hook_after_create => code

Will be called by after a new file is created. Code will be passed ($self).

This hook can be used to write a header to each file, e.g.:

 # hook_after_create
 my ($self) = @_;
 my $fh $self->handle;
 print $fh "header\n";

Since this is called indirectly by write(), locking is also already done.

binmode => str

METHODS

$obj = File::Write::Rotate->new(%args)

Create new object. Known arguments:

• dir => STR (required)

  Directory to put the files in.

• prefix => STR (required)

  Name of files. The files will be named like the following:

   <prefix><period><suffix><rotate_suffix>
  

  "<period>" will only be given if the "period" argument is set. If "period" is set to "yearly", "<period>" will be "YYYY" (4-digit year). If "period" is "monthly", "<period>" will be "YYYY-MM" (4-digit year and 2-digit month). If "period" is "daily", "<period>" will be "YYYY-MM-DD" (4-digit year, 2-digit month, and 2-digit day).

  "<rotate_suffix>" is either empty string for current file; or .1, .2 and so on for rotated files. .1 is the most recent rotated file, .2 is the next most recent, and so on.

  An example, with "prefix" set to "myapp":

   myapp         # current file
   myapp.1       # most recently rotated
   myapp.2       # the next most recently rotated
  

  With "prefix" set to "myapp", "period" set to "monthly", "suffix" set to ".log":

   myapp.2012-12.log     # file name for december 2012
   myapp.2013-01.log     # file name for january 2013
  

  Like previous, but additionally with "size" also set (which will also rotate each period file if it exceeds specified size):

   myapp.2012-12.log     # file(s) for december 2012
   myapp.2012-12.log.1
   myapp.2012-12.log.2
   myapp.2013-01.log     # file(s) for january 2013
  

  All times will use local time, so you probably want to set "TZ" environment variable or equivalent methods to set time zone.

• suffix => STR (default: '')

  Suffix to give to file names, usually file extension like ".log". See "prefix" for more details.

  If you use a yearly period, setting suffix is advised to avoid ambiguity with rotate suffix (for example, is "myapp.2012" the current file for year 2012 or file with 2012 rotate suffix?)

• size => INT (default: 10*1024*1024)

  Maximum file size, in bytes, before rotation is triggered. The default is 10MB (10*1024*1024) if "period" is not set. If "period" is set, no default for "size" is provided, which means files will not be rotated for size (only for period).

• period => STR

  Can be set to either "daily", "monthly", or "yearly". If set, will automatically rotate after period change. See "prefix" for more details.

• histories => INT (default: 10)

  Number of rotated files to keep. After the number of files exceeds this, the oldest one will be deleted. 0 means not to keep any history, 1 means to only keep .1 file, and so on.

• buffer_size => INT (default: 0)

  Set initial value of buffer. See the "buffer_size" attribute for more information.

• lock_mode => STR (default: 'write')

  Can be set to either "none", "write", or "exclusive". "none" disables locking and increases write performance, but should only be used when there is only one writer. "write" acquires and holds the lock for each write. "exclusive" acquires the lock at object creation and holds it until the the object is destroyed.

  Lock file is named "<prefix>"".lck". Will wait for up to 1 minute to acquire lock, will die if failed to acquire lock.

• hook_before_write => CODE
• hook_before_rotate => CODE
• hook_after_rotate => CODE
• hook_after_create => CODE

  See ``ATTRIBUTES''.

• buffer_size => int
• rotate_probability => float (between 0 < x < 1)

  If set, instruct to only check for rotation under a certain probability, for example if value is set to 0.1 then will only check for rotation 10% of the time.

lock_file_path => STR

Returns a string representing the complete pathname to the lock file, based on "dir" and "prefix" attributes.

$fwr->write(@args)

Write to file. Will automatically rotate file if period changes or file size exceeds specified limit. When rotating, will only keep a specified number of histories and delete the older ones.

Does not append newline so you'll have to do it yourself.

$fwr->compress

Compress old rotated files and remove the uncompressed originals. Currently uses IO::Compress::Gzip to do the compression. Extension given to compressed file is ".gz".

Will not lock writers, but will create "<prefix>""-compress.pid" PID file to prevent multiple compression processes running and to signal the writers to postpone rotation.

After compression is finished, will remove the PID file, so rotation can be done again on the next "write()" if necessary.

FAQ

Why use autorotating file?

Mainly convenience and low maintenance. You no longer need a separate rotator process like the Unix logrotate utility (which when accidentally disabled or misconfigured will cause your logs to stop being rotated and grow indefinitely).

What is the downside of using FWR (and LDFR)?

Mainly (significant) performance overhead. At (almost) every "write()", FWR needs to check file sizes and/or dates for rotation. Under default configuration (where "lock_mode" is "write"), it also performs locking on each "write()" to make it safe to use with multiple processes. Below is a casual benchmark to give a sense of the overhead, tested on my Core i5-2400 3.1GHz desktop:

Writing lines in the size of ~ 200 bytes, raw writing to disk (SSD) has the speed of around 3.4mil/s, while using FWR it goes down to around ~13k/s. Using "lock_mode" "none" or "exclusive", the speed is ~52k/s.

However, this is not something you'll notice or need to worry about unless you're writing near that speed.

If you need more speed, you can try setting "rotate_probability" which will cause FWR to only check for rotation probabilistically, e.g. if you set this to 0.1 then checks will only be done in about 1 of 10 writes. This can significantly reduce the overhead and increase write speed several times (e.g. 5-8 times), but understand that this will make the writes ``overflow'' a bit, e.g. file sizes will exceed for a bit if you do size-based rotation. More suitable if you only do size-based rotation since it is usually okay to exceed sizes for a bit.

HOMEPAGE

Please visit the project's homepage at <https://metacpan.org/release/File-Write-Rotate>.

SOURCE

Source repository is at <https://github.com/sharyanto/perl-File-Write-Rotate>.

AUTHOR

perlancar <[email protected]>

COPYRIGHT AND LICENSE

This software is copyright (c) 2016 by [email protected].

This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.