SYNOPSIS

kash|kaget|kaput [-aFHhimqsV] [-f conf-file] [-l login] [-M machines-list] [-n|-w nodes] [-o options] [-p level] [-r command] [-T options] [-t timeout] [-u timeout] [-x nodes] [machines specifications] [command body]

DESCRIPTION

kanif is a tool for cluster management and administration. It combines main features of well known cluster management tools such as c3, pdsh and dsh and mimics their syntax. For the effective cluster management it relies on TakTuk, a tool for large scale remote execution deployment.

For simple parallel tasks that have to be executed on regular machines such as clusters, TakTuk syntax is too complicated. The goal of kanif is to provide an easier and familiar syntax to cluster administrators while still taking advantage of TakTuk characteristics and features (adaptivity, scalability, portability, autopropagation and information redirection).

To work, kanif needs to find the "taktuk" command (version 3.3 and above) in the user path. The other requirements are the same as TakTuk: it requires, on all the nodes of the cluster, a working Perl interpreter (version 5.8 and above) and a command to log without password (such as "ssh" with proper rsa keys installed).

kanif provides three simple commands for clusters administration and management:

kash: runs the same command on multiple nodes

kaput: broadcasts the copy of files or directories to several nodes

kaget: gathers several remote files or directories

kanif combines the advantages of several cluster management tools. Its main features can be summarized as follows:

• C3-style configuration file for static clusters setups
• pdsh-like options such as nodes ranges and timeouts
• dshbak-like gathering, sorting and merging of output

As with "pdsh", kanif deployment can be monitored and controlled by signals. When kanif receives a SIGINT (usually sent by typing Ctrl-C), it displays a brief summary of its deployment state and commands execution progress. After this first SIGINT, if kanif receives a second signal within one second:

• it terminates its execution (cancelling any ongoing task) if this is a SIGINT
• it cancels any ongoing connections and start executions on the already deployed nodes if this is a SIGTSTP (usually sent by typing Ctrl-Z)

At the end of executions, kanif also reports a quick summary of failures: connections and commands execution.

OPTIONS

To help administrators in their task, kanif options syntax is as close as possible to C3/pdsh/dsh well known tools.

-a

--all

Deploys on all nodes of all configured clusters.

-f conf-file

--file conf-file

Uses "conf-file" as configuration file instead of default. Several possibilities are examined for default configuration file, in order: "$HOME/.kanif.conf", "/etc/kanif.conf", "/etc/c3.conf".

-F

--flat-deployment

Deploys all remote execution from the root node (which executes kanif). Useful when remote nodes cannot log on each other.

-H

--head

Deploys only on clusters "head" node (using local interface) for all specified clusters.

-h

--help

Prints a short help text and exits.

-i

--interactive

Asks confirmation before any action. An action is either the execution of one command on all the hosts (default) or the execution of one command on one host (sequential mode, see -s switch).

-l login

--login login

Uses the given "login" to connect to remote hosts.

-M machines-list

--list machines-list

Adds to the remote hosts the names contained in the file named "machines-list". kanif accepts as many -M options as you wish.

-m

--monitoring

Makes kanif more verbose about whats happening during deployment commands execution.

-n nodes

--nodes nodes

Adds the given "nodes" to the deployment. See section ``HOSTNAMES SPECIFICATION'' for more information about "nodes" syntax. kanif accepts as many -n options as you wish.

-o options

--remote-opts options

Sets additional options to be passed to the remote shell command.

-p level

--postprocess level

Sets the level of output formating made in kanif. The general idea is: the higher the level, the more sorted, merged and human readable the output. Default is 4, differents levels are:

0

No processing at all: raw commands output is printed to stdout and raw commands error is printed to stderr. Connections and executions errors are not reported.

1

Same as 0 except that the name of the host which produced the output is prepended before each line.

2

Same as 1 except that the output is sorted by command (one complete command execution is outputed entirely before another one). Connections and executions errors are summarized at the end to stderr.

3

Same as 2 except that the hostname is printed once, formatted as a title, before its output.

4

Same as 3 except that identical output produced by multiple nodes is printed once with all the hosts summarized in the title.

-q

--dry-run

When this option is given, kanif does nothing and prints its configuration, the remote nodes it would have tried to contact and the TakTuk command that would have been executed.

-r command

--remote-cmd command

Sets the name of the "command" used to contact remote hosts (default is "ssh -o StrictHostKeyChecking=no -o BatchMode=yes").

-s

--sequential

Each command is executed sequentially on remote hosts (using the order given on the command line as hosts order).

-T options

--taktuk-options options

Allows power users to pass some options to the TakTuk command executed (caution: always include -s which is the default unless you really know what you are doing).

-t timeout

--timeout timeout

Gives a timeout value for connection attempts. At expiration, connection is canceled and deployment on the remote host is aborted.

-u timeout

--upper-limit timeout

Gives a timeout value for commands execution. At expiration the command is killed with a TERM signal.

-V

--version

Prints kanif version and exits.

-w

-wcoll

Synonym to -n.

-x nodes

--exclude nodes

Excludes some nodes from the ones given using -n or -w. Applies to all hosts sets that do not already contain an exclusion part. Does not apply to host given with -M option.

HOSTNAMES SPECIFICATION

Hostnames given to kanif might be simple machine name or complex hosts lists specifications. In its general form, an hostname is made of an host set and an optional exclusion set separated by a slash. Each of those sets is a comma separated list of host templates. Each of these templates is made of constant parts (characters outside brackets) and optional range parts (characters inside brackets). Each range part is a comma separated list of intervals or single values. Each interval is made of two single values separated by a dash. This is true for all hostnames given to kanif (both with -M or -n/-w options).

In other words, the following expressions are valid host specifications:
    node1
    node[19]
    node[1-3]
    node[1-3],otherhost/node2
    node[1-3,5]part[a-b]/node[3-5]parta,node1partb

they respectively expand to:
    node1
    node19
    node1 node2 node3
    node1 node3 otherhost
    node1parta node2parta node2partb node3partb node5partb

Notice that these list of values are not regular expressions ("node[19]" is "node19" and not "node1, node2, ...., node9"). Intervals are implemented using the perl magical auto increment feature, thus you can use alphanumeric values as interval bounds (see perl documentation, operator ++ for limitations of this auto increment).

MACHINES SPECIFICATIONS

With kanif, you can specify the remote nodes on which you want to do some stuff using the command line switches (-n and -x, pdsh/dsh style), using machines specifications (C3 style) or both. Thus, this part of the documentation might be ignored if you do not want to use C3 style nodes management.

To use machines specification you must describe your cluster in a configuration file (see -f option and kanif.conf(5)). Machines specifications are nodes intervals taken from clusters defined in this file.

A machine specification is an optional cluster name followed by a colon and an optional range. The default cluster is taken if no cluster name is given. All the nodes of the cluster are taken if no range is given. Notice that if none of -n/-w, -M or machine specification is given on the command line, the remote hosts are assumed to be all the nodes of the default cluster.

COMMAND BODY

Depending on the name used to invoke it (kash, kaput or kaget), kanif does not perform the same task. Here are its various behavior:

kash [options] [command line]

Executes the last part of the command line on all the remote hosts. If this last part is empty, enters interactive mode in which kanif waits for command (one per line) on stdin. In interactive mode, just send an EOF character (Ctrl-D) to exit kash.

kaput [options] src1 [src2 ...] dest

Copies one ore more files or directories to all the remote hosts. The last argument is the path to the destination file or directory on the remote machine. The other arguments are local files or directories to copy. Behavior and limitations are similar to the command cp(1).

kaget [options] src1 [src2 ...] dest

Download one ore more files or directories from all the remote hosts. The last argument is the path to the destination directory on the local machine. The other arguments are path to files or directories on remote hosts. Each source must be present on all the remote hosts. Sources are copied to the destination directory having the originating host appended to their name.

Notice that when using kaget or kaput each file or directory is completely copied before proceeding to the next one.

EXAMPLES

When a configuration file exists on the system or is given on the command line (see option -f), remote machines can be specified via clusters names. For instance, the simple execution of the command "ls -l" on all the nodes of the cluster named "megacluster" can be written:

    kash megacluster: ls -l

Intervals can also be given. The following command copies the local .cshrc file to the login directory of a subset of the default cluster and another subset of the "megacluster":

    kaput :3-6 megacluster:2-5 $HOME/.cshrc .

Finally, one can take advantage of the default behavior to gather a file named "results.txt" placed in the "/tmp" directory on all the nodes of the default cluster to the local directory "results":

    kaget /tmp/results.txt results

When a user does not want to write a configuration file or just wants to deploy on some other nodes, it is possible to give remote hosts on the command line:

    kash -n localhost,supernode uptime

This last command will just execute "uptime" on "localhost" and "supernode". Giving intervals and exclusion lists is also possible on the command line. The following command copie the file "/tmp/temporary.txt" to the remote "/tmp" directories of node1 and node5:

    kaput -n node[1-6] -x node[2-4],node6 /tmp/temporary.txt /tmp

Finally, without entering into the details of each option, the final command illustrates the -u option. It executes during 5 seconds a "ping" to "gateway" from 5 nodes:

    kash -n node[1-2],node[4-6] -u 5 ping gateway

AUTHOR

The author of kanif and current maintainer of the package is Guillaume Huard. Acknowledgements to Lucas Nussbaum for the idea of the name ``kanif''.

COPYRIGHT

kanif is provided under the terms of the GNU General Public License version 2 or later.