likwid-powermeter(1)
A tool to print power and clocking information on Intel CPUs
SYNOPSIS
likwid-powermeter
[-vhpitf]
[-V
verbosity_level]
[-c
socket_list]
[-s
duration]
[-M
<0|1>]
DESCRIPTION
likwid-powermeter
is a command line application to get the Energy comsumption on Intel RAPL capable processors. Currently
only Intel SandyBridge is supported. It also prints information about TDP and Turbo Mode steps supported.
The Turbo Mode information works on all Turbo mode enabled Intel processors. The tool can be either used
in stethoscope mode for a specified duration or as a wrapper to your application measuring your complete
run. RAPL works on a per package (socket) base.
Please note that the RAPL counters are also accessible as normal events within likwid-perfctr.
OPTIONS
- -h,--help
-
prints a help message to standard output, then exits.
- -v,--version
-
prints version information to standard output, then exits.
- -V, --verbose <level>
-
verbose output during execution for debugging. 0 for only errors, 1 for informational output, 2 for detailed output and 3 for developer output
- -c <socket_list>
-
set on which socket(s) the RAPL interface is accessed. List of sockets like 0,1,2 or 0-2 are allowed.
- -M <0|1>
-
set how MSR registers are accessed, 0=direct, 1=accessDaemon.
- -s <duration>
-
set measure duration in us, ms or s. (default 2s)
- -p
-
prints out information about dynamic clocks and CPI information on the socket(s) measured.
- -i,--info
-
prints out information TDP and Turbo mode steps of all RAPL domains supporting it.
- -t
-
prints out the temperature of all CPUs in the system.
- -f
-
prints out the temperature like
-t
but used Fahrenheit as temperature unit.
EXAMPLE
- 1.
-
Measure the power consumption for 4 seconds on socket 1
- likwid-powermeter -s 4 -c 1
-
- 2.
-
Use it as wrapper for an application to measure the energy for the whole execution
- likwid-powermeter -c 1 ./a.out
-
