SYNOPSIS

stoken import {--file=file | --token=token_string} [--force] [opts]

stoken setpin [opts]

stoken setpass [opts]

stoken show [--seed] [opts]

stoken export [{--blocks | --iphone | --android | --v3 | --sdtid | --qr=file.png | --show-qr}] [opts]

stoken issue [--template=file]

stoken help

stoken version

DESCRIPTION

stoken is a software token compatible with RSA SecurID 128-bit (AES) tokens. The command-line interface provides facilities for importing new tokens, displaying the current tokencode, encrypting the seed with a user-specified password, storing the user's PIN alongside the token, and viewing or exporting the token data.

BASIC USAGE

Use stoken import to decode a token string and write it into ~/.stokenrc. This may prompt for a device ID and/or password, depending on what options your administrator used to create the token. The token string can be provided on the command line, or read from a text file.

stoken will autodetect the following types of token strings:

286510182209303756117707012447003320623006...

29658-21098-45467-64675-65731-01441-11337...

Pure numeric (81-digit) "ctf" (compressed token format) strings, with or without dashes. These may have been furnished as-is, or they could have been derived from an sdtid file by the RSA TokenConverter program.

com.rsa.securid.iphone://ctf?ctfData=229639330774927764401...

iPhone-compatible token strings.

http://127.0.0.1/securid/ctf?ctfData=250494932146245277466...

http://127.0.0.1/securid/ctf?ctfData=AwAAfBc3QSopPxxjLGnxf...

Android-compatible token strings.

<?xml version=...

RSA sdtid-formatted XML files. These should be imported from a file: stoken import --file=FILE.SDTID.

Tokens supplied as QR codes can be converted back to standard URIs by running zbarimg(1) on the image file.

The device ID, if used, can be viewed in the "about" menu for the RSA soft token app on the phone. Numeric ctf strings and smartphone tokens bound to a device ID contain a seed that is encrypted using the device ID, so the ID must be furnished before stoken can successfully import the token. sdtid files can be imported without knowledge of the device ID, as long as the password (if any) is known.

By default, stoken import will refuse to overwrite an existing token in ~/.stokenrc. The --force switch overrides this check.

stoken import will normally prompt for a new password, which is used to encrypt the seed before storing it in ~/.stokenrc. This can be bypassed by entering an empty password, or specifying --new-password='' on the command line. It is recommended to choose a longer, hard-to-guess passphrase for this purpose.

After a token has been imported, running stoken with no arguments will prompt for any required password or PIN, then display the current tokencode.

Tokencodes are computed from the raw (decrypted) seed data, the current time of day, and the PIN. If the same seed is installed on multiple devices, they should all produce identical tokencodes. If they do not, double-check the timezone setting and consider using NTP to synchronize the system time to a known good source.

stoken setpin can be used to save the PIN in ~/.stokenrc. Not all tokens will require a PIN; this can be configured by the SecurID administrator when generating new tokens. Setting an empty PIN will remove the PIN from ~/.stokenrc so that the user will be prompted every time it is required. See the SECURITY CONSIDERATIONS section below for additional details.

stoken setpass encrypts the seed and PIN (if present) in ~/.stokenrc with a user-selectable password or passphrase. If an empty password is entered, the password will be removed. See the SECURITY CONSIDERATIONS section below for additional details.

VIEWING TOKENS

stoken show displays information about the current token, typically read from ~/.stokenrc. The --seed option displays the encrypted and decrypted seed bytes (which should be treated as sensitive data, as they can be used to derive tokencodes).

stoken export translates the current token into a format suitable for importation to another device.

stoken issue generates a new software token in XML sdtid format. A template file, itself in sdtid format, may be provided to override some or all of the human-readable fields. This would permit appropriate serial numbers, expiration dates, usernames, etc. to be specified. If Secret, Seed, or MAC fields are present in the template file, they will be ignored.

GLOBAL OPTIONS

--rcfile=file

Use an alternate .stokenrc configuration file. This is typically used to support multiple tokens on the same user's UNIX account. Note that the .stokenrc file stores additional data (such as the PIN), so it cannot be parsed as a "raw" token string by stoken --file.

--password=password, -p password

Use a password supplied from the command line, instead of prompting the user. See notes in SECURITY CONSIDERATIONS below.

--pin=pin, -n pin

Use a PIN supplied from the command line, instead of prompting the user. See notes in SECURITY CONSIDERATIONS below. If you save your PIN in ~/.stokenrc, note that --pin=0000 is often required when activating a new soft token for the first time.

--devid=devid

Use a device ID supplied from the command line to decrypt the token. A token can be bound to a class GUID device ID (i.e. a certain type of device, such as "iPhone" or "Android"), a unique device ID (one specific unit), or nothing. stoken will attempt to autodetect matches with a class GUID, but on rare occasions this results in false positives due to hash collisions. In these cases, the bound device ID should be specified on the command line to override autodetection.

EXPORT OPTIONS

--new-password=password

Supply the encryption password from the command line for operations that write out a token string or .stokenrc file: import, export, setpass, and issue. See notes in SECURITY CONSIDERATIONS below.

--keep-password

If the token in the .stokenrc file is protected with a password, retain the same password when exporting the token. By default, the export operation will not encrypt the token with a password; note that it may not be possible to enter all possible passwords on devices with limited text input capabilities (such as feature phones).

--new-pin=pin

Supply a new PIN from the command line for the setpin operation. See notes in SECURITY CONSIDERATIONS below.

--new-devid=devid

Used with the export or issue command to encrypt the new token with a specific device ID. This is only used for testing purposes.

--blocks, --iphone, --android, --v3

Used with the export command to select the output format. See examples in BASIC USAGE. By default, the export command will print an unformatted 81-digit string to standard output.

--sdtid, --xml

These options are synonyms. Both export a token to standard output in RSA's sdtid XML format.

--qr=file.png

Encode the token as a QR code and write it to file.png. This requires the qrencode program to be installed.

--show-qr

Encode the token as a QR code and immediately display it on the screen. This requires the qrencode program to be installed. If the QR_VIEWER environment variable is set, stoken will use that program as the preferred viewer. Otherwise it will try to execute a few common Linux image viewers, and give up if none of them exist.

--template=file

Used with the export or issue commands to override fields in the XML output. The template file should look like any standard sdtid file, but all fields are optional and will default to reasonably sane values if omitted. This can be used to force the output XML to use a specific serial number, user name, expiration date, etc. Correct MAC checksums will be (re)computed on the provided values. See the examples directory in the source distribution for more information.

OTHER OPTIONS

--use-time={unix_time|+offset|-offset}

Instead of generating a tokencode based on the current time of day, force a specific time, or adjust the current time based on a positive or negative offset (specified in seconds). This is only used for testing purposes.

--next

Generate the next tokencode instead of the current tokencode. For a 60-second token, this is equivalent to --use-time=+60.

--stdin, -s

When generating a tokencode that requires either a password or PIN, read the password or PIN as single line from standard input. This is intended to allow external programs to call stoken to generate single-use passwords without user intervention; see NON-INTERACTIVE USE below.

--force, -f

Override token expiration date checks (for tokencode) or token overwrite checks (for import).

--batch, -b

Abort with an error exit code if any user input is required. Intended for automated operation and testing.

--file=file

Read a ctf string, an Android/iPhone URI, or an XML sdtid token from file instead of the .stokenrc configuration. Most stoken commands accept this flag, but it is expected that the typical user will save his token in ~/.stokenrc instead of supplying it by hand on every invocation. Typically --file and --token are only used for the import command.

--token=token_string

Use a token from the command line instead of the .stokenrc file. See above notes on --file.

--random

Generate a random token on the fly. Used for testing or demonstrations only. These tokens should not be used for real authentication.

--help, -h

Display basic usage information.

--version, -v

Display version information.

SECURITY CONSIDERATIONS

Software tokens, unlike hardware tokens, are relatively easy to replicate. Systems that store soft token seeds should be carefully guarded to prevent unauthorized disclosure. The use of whole-disk encryption, such as TrueCrypt, is strongly recommended for laptops and other portable devices that are easily lost or stolen.

stoken permits users to store their PIN in ~/.stokenrc to allow for automated (scriptable) generation of tokencodes, but the risks of this approach should be carefully weighed against the benefits.

Using the setpass command to encrypt the seed and PIN in ~/.stokenrc provides some degree of protection against unauthorized access, but does not necessarily cover all possible attack vectors. A host that is already compromised (e.g. running a keylogger) will not provide adequate protection for any seed(s) stored on it.

stoken encryption passwords may be up to 40 characters long. A longer passphrase constructed from several random words can provide more protection from brute-force attacks than a shorter password.

Entering a password or PIN on the command line is generally unsafe on multiuser systems, as other users may be able to view the command line arguments in ps or similar utilities. The command line could also be cached in shell history files.

Encoding QR tokens may expose the seed data through ps, and the --show-qr option writes temporary PNG files in /tmp.

stoken attempts to lock pages to prevent swapping out to disk, but does not scrub secrets from process memory.

NON-INTERACTIVE USE

Other applications, such as VPN clients, may want to invoke stoken non-interactively to generate single-use passwords. Three usage modes are supported, depending on the level of security (and/or convenience) that is required:

No password or PIN

The user configures stoken to print a tokencode immediately upon invocation, with no prompts, by using setpin to store the PIN in ~/.stokenrc and using setpass to set an empty password. The other application can then invoke stoken --batch and read the tokencode through a pipe from standard output.

This provides no security for the seed, but may be useful in applications where (re-)authentication is frequent or unattended operation is required.

Save the PIN and set a password

The user configures stoken to encrypt the ~/.stokenrc secrets with a password using setpass, then saves the PIN with setpin. The PIN and the seed will both be encrypted with the password. The other application will request the password from the user, then call stoken --stdin, write the password to stoken's standard input through a pipe, and read back a tokencode from stoken's standard output.

No password; prompt for the PIN

Similar to above, but set an empty password using setpass, do not save the PIN in ~/.stokenrc, and pass the PIN to stoken --stdin via standard input.

FILES

~/.stokenrc

Default configuration file.

AUTHOR