ts_calibrate(1) A test program to calibrate a touch screen for embedded devices.

DESCRIPTION

This manual page documents briefly the ts_calibrate, a basic test program for touchscreen library.

This manual page was written for the Debian(TM) distribution because the original program does not have a manual page.

ENVIRONMENT VARIABLES

Latest versions of the Xorg tslib input driver use hal to configure the touchscreen within Xorg. Environment variables are only needed for the tslib commands.

TSLIB_TSDEVICE

TS device file name.

Default (non inputapi): /dev/touchscreen/ucb1x00

Default (inputapi) [Debian]: /dev/input/event0

TSLIB_CALIBFILE

Calibration file.

Default: /etc/pointercal

TSLIB_CONFFILE

Configuration file for tslib.

Default: /etc/ts.conf

TSLIB_PLUGINDIR

Plugin directory.

Default: /usr/lib/$triplet/ts0/ where triplet is the MultiArch path, e.g. arm-linux-gnueabi.

TSLIB_CONSOLEDEVICE

Console device.

Default: /dev/tty

TSLIB_FBDEVICE

Framebuffer device.

Default: /dev/fb0

For more information on tslib configuration, see ts.conf (5)

AUTHOR

This manual page was written by Neil Williams [email protected] for the Debian(TM) system (but may be used by others). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 any later version published by the Free Software Foundation.

On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.

AUTHOR

Russell King

Author.

COPYRIGHT


Copyright © 2008 Neil Williams