DESCRIPTION
Usage:
- tsserve <infile> tsserve <infile> -port <n> tsserve [switches] <infile> [switches]
- TS tools version 1.11, tsserve built Nov 11 2008 17:15:49
- Act as a server which plays the given file (containing Transport Stream or Program Stream data). The output is always Transport Stream.
Input:
- <infile>
- An H.222.0 TS or PS file to serve to the client. This will be treated as file 0 (see below).
- -0 <file0> .. -9 <file9>
- Specify files 0 through 9, selectable with command characters 0 through 9. The lowest numbered file will be the default for display.
General Switches:
- -details
- Print out more detailed help information, including some less common options.
- -quiet, -q
- Suppress informational and warning messages.
- -verbose, -v
- Output additional diagnostic messages
- -port <n>
- Listen for a client on port <n> (default 88)
- -noaudio
- Ignore any audio data
- -pad <n>
- Pad the start of the output with <n> filler TS packets, to allow the client to synchronize with the datastream. Defaults to 8.
- -noseqhdr
- Do not output sequence headers for fast forward/reverse data. Only relevant to H.262 data.
Program Stream Switches:
- -prepeat <n>
- Output the program data (PAT/PMT) after every <n> PS packs. Defaults to 100.
- -h264, -avc
- Force the program to treat the input as MPEG-4/AVC.
- -h262
- Force the program to treat the input as MPEG-2.
- Both of these affect the stream type of the output data.
- If the audio stream being output is Dolby (AC-3), then the stream type used to output it differs for DVB (European) and ATSC (USA) data. It may be specified as follows:
- -dolby dvb
- Use stream type 0x06 (the default)
- -dolby atsc
- Use stream type 0x81
- For information on using the program in other modes, see -details.
- tsserve <infile> tsserve <infile> -port <n> tsserve [switches] <infile> [switches]
- TS tools version 1.11, tsserve built Nov 11 2008 17:15:49
- Act as a server which plays the given file (containing Transport Stream or Program Stream data). The output is always Transport Stream.
Input:
- <infile>
- An H.222.0 TS or PS file to serve to the client. This will be treated as file 0 (see below).
- -0 <file0> .. -9 <file9>
- Specify files 0 through 9, selectable with command characters 0 through 9. The lowest numbered file will be the default for display.
General Switches:
- -details
- Print out more detailed help information, including some less common options.
- -quiet, -q
- Suppress informational and warning messages.
- -verbose, -v
- Output additional diagnostic messages
- -port <n>
- Listen for a client on port <n> (default 88)
- -noaudio
- Ignore any audio data
- -pad <n>
- Pad the start of the output with <n> filler TS packets, to allow the client to synchronize with the datastream. Defaults to 8.
- -noseqhdr
- Do not output sequence headers for fast forward/reverse data. Only relevant to H.262 data.
Program Stream Switches:
- -prepeat <n>
- Output the program data (PAT/PMT) after every <n> PS packs. Defaults to 100.
- -h264, -avc
- Force the program to treat the input as MPEG-4/AVC.
- -h262
- Force the program to treat the input as MPEG-2.
- Both of these affect the stream type of the output data.
- If the audio stream being output is Dolby (AC-3), then the stream type used to output it differs for DVB (European) and ATSC (USA) data. It may be specified as follows:
- -dolby dvb
- Use stream type 0x06 (the default)
- -dolby atsc
- Use stream type 0x81
- For information on using the program in other modes, see -details.