SYNOPSISyuvscaler [-I input_keyword] [-M mode_keyword] [-O output_keyword] [-n p|s|n] [-v 0-2] [-h]
DESCRIPTIONyuvscaler is a general (UP or DOWN) scaling utility that is provided to allow conversion between different video formats. It reads in a YUV4MPEG2 format stream from stdin (such as that produced by lav2yuv) and outputs such stream to stdout (e.g. to be consumed by mpeg2enc). The most common use of yuvscaler is to generate input suitable for MPEG encoding to VCD or SVCD formats using mpeg2enc(1).
yuvscaler will automatically take into account PAL/SECAM and NTSC format, as well as widescreen (16:9) format and interlacing. Use of yuvscaler was designed to be straightforward.
lav2yuv my-file.avi | yuvscaler -O VCD | mpeg2enc -f 1 -o vcd.%d.m1v
lav2yuv my-file.qt | yuvscaler -O SVCD | mpeg2enc -f 4 -o svcd.%d.m2v
Encoding anamorphic 16:9 as letterboxed VCD:
lav2yuv my-ana16-9.eli | yuvscaler -M WIDE2VCD | mpeg2enc -f 1 -o letterbox_vcd.%d.m1v
Encoding anamorphic 16:9 as letterboxed SVCD:
lav2yuv my-ana16-9.eli | yuvscaler -M WIDE2STD -O SVCD | mpeg2enc -f 4 -o letterbox_svcd.%d.m2v
Encoding anamorphic 16:9 as letterboxed DVD:
lav2yuv my-ana16-9.eli | yuvscaler -M WIDE2STD -O DVD | mpeg2enc -f 8 -o letterbox_dvd.%d.m2v
- -I input_keyword
Specifies input processing options. Input options may be combined by using
multiple -I flags. Possible input_keywords are:
- USE_WidthxHeight+WidthOffset+HeightOffset to select a useful area of the input frame (all multiple of 2, Height and HeightOffset multiple of 4 if interlaced), the rest of the image being discarded
ACTIVE_WidthxHeight+WidthOffset+HeightOffset to select an active area
of the input frame (all multiple of 2, Height and HeightOffset multiple of 4 if interlaced), the rest
of the image being made black
- -M mode_keyword
Sets the scaling mode options. Scaling mode options can be combined by giving several
- BICUBIC - to use the (Mitchell-Netravalli) high-quality bicubic upsacling and/or downscaling algorithm
- RESAMPLE - to use a classical resampling algorithm -only for downscaling- that goes much faster than bicubic. For coherence reason, yuvscaler will use RESAMPLE if only downscaling is necessary, BICUBIC if not.
- WIDE2STD - convert widescreen anamorphic (16:9) input video into letterboxed (4:3), generating necessary black lines. Note that for MPEG applications if your player can properly decode anamorphic video you may wish to leave the video unscaled and simply specify the approprate format during MPEG encoding (see mpeg2enc(1)).
- RATIO_WidthIn_WidthOut_HeightIn_HeightOut to specified scaling ratios of WidthIn/WidthOut for width and HeightIN/HeightOut for height to be applied to the useful area. The output frames that result from scaling can have a different format than the output format specified using -O options(s). In this case, yuvscaler automatically generate necessary black lines and columns and/or skips necessary lines and columns to center the scaled image in the output frame.
- WIDE2VCD to scale anamorphic widescreen (16:9) frames into letterboxed VCD format (equivalent to -M WIDE2STD -O VCD).
- FASTVCD to transcode full sized frames to VCD (equivalent to -M RATIO_2_1_2_1 -O VCD, see below).
- FAST_WIDE2VCD to transcode full-sized anamorphic (16:9) frames to letter-boxed VCD (equivalent to -M WIDE2STD -M RATIO_2_1_2_1 -O VCD, see below).
- NO_HEADER to suppress stream header generation on output
- MMX to use MMX functions for BICUBIC scaling (experimental feature!!)
- -O output_keyword
Sets the output frame format options. Output format
options can be combined by giving several -O flags.
By default, output frames size will be the same as input frame sizes, as
well as output frames interlacing if coherent with output keyword
specification which prevails, top_first if not.
- MONOCHROME to generate monochrome frames on output. Chrominance information for the scaled pixels is set neutral (white). MPEG encoding of black and white video will be both inefficient and show annonying chrominance artifacts unless this is done.
- VCD to generate VCD compliant frames on output (taking care of PAL and NTSC standards). Non-interlaced output.
- SVCD to generate SVCD compliant frames on output (taking care of PAL and NTSC standards). Top-field-first interlaced frames.
- DVD to generate DVD compliant frames on output (taking care of PAL and NTSC standards). Top-field-first interlaced frames.
- SIZE_WidthxHeight to generate frames of size WidthxHeight on output (multiple of 4)
- If VCD, SVCD or DVD keywords are not used, output interlacing is taken of the same type as input. By default, output frames size will be the same as input frame size.
- -n p|s|n
(usually not necessary) if norm could not be determined from data flux, specifies the OUTPUT norm
for VCD/SVCD (p=pal,s=secam,n=ntsc).
- -v 0|1|2
Specifies the degree of verbosity: 0=quiet, 1=normal, 2=verbose/debug
Prints a summary of command line syntax.
Note: The most useful downscaling ratios are handled using dedicated optimised scaling routines. They are:
- RATIO_WidthIn_WidthOut_2_1 => Full-sized frame to VCD downscaling
- RATIO_3_2_1_1 => Full-sized frame to SVCD downscaling
- RATIO_1_1_4_3 => WIDE2STD downscaling mode
- RATIO_WidthIn_WidthOut_1_1 => downscaling only concerns width, not height
- RATIO_1_1_HeightIn_HeightOut => downscaling only concerns height, not width
- RATIO_2_1_2_1 => FASTVCD, slightly width distorted (real ratio 45 to 22) but faster full-sized frame to VCD downscaling (-M RATIO_2_1_2_1 -O VCD)
- RATIO_WidthIn_WidthOut_8_3 => specific to WIDE2VCD downscaling (-M WIDE2STD -O VCD)
- RATIO_2_1_8_3 => specific to (slighly distorted) FAST_WIDE2VCD downscaling (-M WIDE2STD -M RATIO_2_1_2_1 -O VCD)
RATIO_1_1_1_1 => copy useful input part of possible several files into output frames