SYNOPSIS

mbim-network [,OPTIONS/] [,DEVICE/] [,COMMAND/]

DESCRIPTION

Simple network management of MBIM devices

Commands:

start

Start network connection

stop

Stop network connection

status

Query network connection status

OPTIONS

--profile=,[PATH]/

Use the profile in the specified path

--help

Show help options

--version

Show version

Notes:

1) [DEVICE] is given as the full path to the cdc-wdm character device, e.g.:

,/dev/cdc-wdm0/

2) The mbim-network script requires a profile to work. Unless explicitly specified with `--profile', the file is assumed to be available in the following path:

,/etc/mbim-network.conf/

3) The APN to use should be configured in the profile, in the following way (e.g. assuming APN is called 'internet'):

APN=internet

4) Optional APN user/password strings may be given in the following way:

APN_USER=user APN_PASS=password

5) If APN user/password is specified, the authentication protocol to use (one of PAP, CHAP or MSCHAPV2) must also be specified in the following way:

APN_AUTH=protocol

6) If you want to instruct the mbim-network script to use the mbim-proxy setup, you can do so by configuring the following line in the profile:

PROXY=yes

7) Once the mbim-network script reports a successful connection you still need to run a DHCP client on the associated WWAN network interface.

COPYRIGHT

Copyright (2013-2015) Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.