DESCRIPTIONThe sudo.conf file is used to configure the sudo front end. It specifies the security policy and I/O logging plugins, debug flags as well as plugin-agnostic path names and settings.
The file supports the following directives, described in detail below.
- a security policy or I/O logging plugin
- a plugin-agnostic path
- a front end setting, such as disable_coredump or group_source
- debug flags to aid in debugging sudo sudoreplay visudo and the sudoers plugin.
The pound sign (`#' ) is used to indicate a comment. Both the comment character and any text after it, up to the end of the line, are ignored.
Long lines can be continued with a backslash (`\' ) as the last character on the line. Note that leading white space is removed from the beginning of lines even when the continuation character is used.
Non-comment lines that don't begin with Plugin Path Debug or Set are silently ignored.
The file is always parsed in the ``C '' locale.
Plugin configurationsudo supports a plugin architecture for security policies and input/output logging. Third parties can develop and distribute their own policy and I/O logging plugins to work seamlessly with the sudo front end. Plugins are dynamically loaded based on the contents of .
A Plugin line consists of the Plugin keyword, followed by the symbol_name and the path to the dynamic shared object that contains the plugin. The symbol_name is the name of the struct policy_plugin or struct io_plugin symbol contained in the plugin. The path may be fully qualified or relative. If not fully qualified, it is relative to the directory specified by the plugin_dir Path setting, which defaults to /usr/lib/sudo In other words:
Plugin sudoers_policy sudoers.so
is equivalent to:
Plugin sudoers_policy /usr/lib/sudo/sudoers.so
If the plugin was compiled statically into the sudo binary instead of being installed as a dynamic shared object, the path should be specified without a leading directory, as it does not actually exist in the file system. For example:
Plugin sudoers_policy sudoers.so
Starting with sudo 1.8.5, any additional parameters after the path are passed as arguments to the plugin's open function. For example, to override the compile-time default sudoers file mode:
Plugin sudoers_policy sudoers.so sudoers_mode=0440
See the sudoers(5) manual for a list of supported arguments.
The same dynamic shared object may contain multiple plugins, each with a different symbol name. The file must be owned by uid 0 and only writable by its owner. Because of ambiguities that arise from composite policies, only a single policy plugin may be specified. This limitation does not apply to I/O plugins.
If no file is present, or if it contains no Plugin lines, the sudoers plugin will be used as the default security policy and for I/O logging (if enabled by the policy). This is equivalent to the following:
Plugin sudoers_policy sudoers.so Plugin sudoers_io sudoers.so
For more information on the sudo plugin architecture, see the sudo_plugin8 manual.
Path settingsA Path line consists of the Path keyword, followed by the name of the path to set and its value. For example:
Path noexec /usr/lib/sudo/sudo_noexec.so Path askpass /usr/X11R6/bin/ssh-askpass
If no path name is specified, features relying on the specified setting will be disabled. Disabling Path settings is only supported in sudo version 1.8.16 and higher.
The following plugin-agnostic paths may be set in the /etc/sudo.conf file:
- The fully qualified path to a helper program used to read the user's password when no terminal is available. This may be the case when sudo is executed from a graphical (as opposed to text-based) application. The program specified by askpass should display the argument passed to it as the prompt and write the user's password to the standard output. The value of askpass may be overridden by the SUDO_ASKPASS environment variable.
- The fully-qualified path to a shared library containing dummy versions of the Fn execl , Fn execle , Fn execlp , Fn exect , Fn execv , Fn execve , Fn execvP , Fn execvp , Fn execvpe , Fn fexecve , Fn popen , Fn posix_spawn , Fn posix_spawnp , and Fn system library functions that just return an error. This is used to implement the noexec functionality on systems that support LD_PRELOAD or its equivalent. The default value is: /usr/lib/sudo/sudo_noexec.so
- The default directory to use when searching for plugins that are specified without a fully qualified path name. The default value is /usr/lib/sudo
- The fully-qualified path to the sesh binary. This setting is only used when sudo is built with SELinux support. The default value is /usr/lib/sudo/sesh
Other settingsThe file also supports the following front end settings:
Core dumps of
itself are disabled by default to prevent the disclosure of potentially
To aid in debugging
crashes, you may wish to re-enable core dumps by setting
to false in
Set disable_coredump false
All modern operating systems place restrictions on core dumps from setuid processes like sudo so this option can be enabled without compromising security. To actually get a sudo core file you will likely need to enable core dumps for setuid processes. On BSD and Linux systems this is accomplished in the sysctl command. On Solaris, the coreadm command is used to configure core dump behavior.
This setting is only available in sudo version 1.8.4 and higher.
passes the invoking user's group list to the policy and I/O plugins.
On most systems, there is an upper limit to the number of groups that
a user may belong to simultaneously (typically 16 for compatibility
On systems with the
getconf NGROUPS_MAXwill return the maximum number of groups.
However, it is still possible to be a member of a larger number of groups--they simply won't be included in the group list returned by the kernel for the user. Starting with sudo version 1.8.7, if the user's kernel group list has the maximum number of entries, sudo will consult the group database directly to determine the group list. This makes it possible for the security policy to perform matching by group name even when the user is a member of more than the maximum number of groups.
The group_source setting allows the administrator to change this default behavior. Supported values for group_source are:
- Use the static group list that the kernel returns. Retrieving the group list this way is very fast but it is subject to an upper limit as described above. It is ``static'' in that it does not reflect changes to the group database made after the user logs in. This was the default behavior prior to sudo 1.8.7.
- Always query the group database directly. It is ``dynamic'' in that changes made to the group database after the user logs in will be reflected in the group list. On some systems, querying the group database for all of a user's groups can be time consuming when querying a network-based group database. Most operating systems provide an efficient method of performing such queries. Currently, sudo supports efficient group queries on AIX, BSD, HP-UX, Linux and Solaris.
- Only query the group database if the static group list returned by the kernel has the maximum number of entries. This is the default behavior in sudo 1.8.7 and higher.
For example, to cause sudo to only use the kernel's static list of groups for the user:
Set group_source static
This setting is only available in sudo version 1.8.7 and higher.
The maximum number of user groups to retrieve from the group database.
Values less than one will be ignored.
This setting is only used when querying the group database directly.
It is intended to be used on systems where it is not possible to detect
when the array to be populated with group entries is not sufficiently large.
will allocate four times the system's maximum number of groups (see above)
and retry with double that number if the group database query fails.
However, some systems just return as many entries as will fit and
do not indicate an error when there is a lack of space.
This setting is only available in sudo version 1.8.7 and higher.
will probe the system's network interfaces and pass the IP address
of each enabled interface to the policy plugin. This makes it
possible for the plugin to match rules based on the IP address
without having to query DNS. On Linux systems with a large number
of virtual interfaces, this may take a non-negligible amount of time.
If IP-based matching is not required, network interface probing
can be disabled as follows:
Set probe_interfaces false
This setting is only available in sudo version 1.8.10 and higher.
Debug flagssudo versions 1.8.4 and higher support a flexible debugging framework that can help track down what sudo is doing internally if there is a problem.
A Debug line consists of the Debug keyword, followed by the name of the program (or plugin) to debug (sudo , visudo , sudoreplay , sudoers ) the debug file name and a comma-separated list of debug flags. The debug flag syntax used by sudo and the sudoers plugin is subsystem @ priority but a plugin is free to use a different format so long as it does not include a comma (`,' )
Debug sudo /var/log/sudo_debug [email protected],[email protected]
would log all debugging statements at the warn level and higher in addition to those at the info level for the plugin subsystem.
As of sudo 1.8.12, multiple Debug entries may be specified per program. Older versions of sudo only support a single Debug entry per program. Plugin-specific Debug entries are also supported starting with sudo 1.8.12 and are matched by either the base name of the plugin that was loaded (for example sudoers.so or by the plugin's fully-qualified path name. Previously, the sudoers plugin shared the same Debug entry as the sudo front end and could not be configured separately.
The following priorities are supported, in order of decreasing severity: crit , err , warn , notice , diag , info , trace and debug Each priority, when specified, also includes all priorities higher than it. For example, a priority of notice would include debug messages logged at notice and higher.
The priorities trace and debug also include function call tracing which logs when a function is entered and when it returns. For example, the following trace is for the get_user_groups() function located in src/sudo.c:
sudo -> get_user_groups @ src/sudo.c:385 sudo <- get_user_groups @ src/sudo.c:429 := groups=10,0,5
When the function is entered, indicated by a right arrow `->' , the program, process ID, function, source file and line number are logged. When the function returns, indicated by a left arrow `<-' , the same information is logged along with the return value. In this case, the return value is a string.
The following subsystems are used by the sudo front-end:
- matches every subsystem
- command line argument processing
- user conversation
- event subsystem
- command execution
- sudo main function
- network interface handling
- communication with the plugin
- plugin configuration
- pseudo-tty related code
- SELinux-specific handling
- utility functions
- utmp handling
The sudoers(5) plugin includes support for additional subsystems.
- sudo front end configuration
# # Default /etc/sudo.conf file # # Format: # Plugin plugin_name plugin_path plugin_options ... # Path askpass /path/to/askpass # Path noexec /path/to/sudo_noexec.so # Debug sudo /var/log/sudo_debug [email protected] # Set disable_coredump true # # The plugin_path is relative to /usr/lib/sudo unless # fully qualified. # The plugin_name corresponds to a global symbol in the plugin # that contains the plugin interface structure. # The plugin_options are optional. # # The sudoers plugin is used by default if no Plugin lines are # present. Plugin sudoers_policy sudoers.so Plugin sudoers_io sudoers.so # # Sudo askpass: # # An askpass helper program may be specified to provide a graphical # password prompt for "sudo -A" support. Sudo does not ship with # its own askpass program but can use the OpenSSH askpass. # # Use the OpenSSH askpass #Path askpass /usr/X11R6/bin/ssh-askpass # # Use the Gnome OpenSSH askpass #Path askpass /usr/libexec/openssh/gnome-ssh-askpass # # Sudo noexec: # # Path to a shared library containing dummy versions of the execv(), # execve() and fexecve() library functions that just return an error. # This is used to implement the "noexec" functionality on systems that # support C<LD_PRELOAD> or its equivalent. # The compiled-in value is usually sufficient and should only be # changed if you rename or move the sudo_noexec.so file. # #Path noexec /usr/lib/sudo/sudo_noexec.so # # Core dumps: # # By default, sudo disables core dumps while it is executing # (they are re-enabled for the command that is run). # To aid in debugging sudo problems, you may wish to enable core # dumps by setting "disable_coredump" to false. # #Set disable_coredump false # # User groups: # # Sudo passes the user's group list to the policy plugin. # If the user is a member of the maximum number of groups (usually 16), # sudo will query the group database directly to be sure to include # the full list of groups. # # On some systems, this can be expensive so the behavior is configurable. # The "group_source" setting has three possible values: # static - use the user's list of groups returned by the kernel. # dynamic - query the group database to find the list of groups. # adaptive - if user is in less than the maximum number of groups. # use the kernel list, else query the group database. # #Set group_source static
HISTORYSee the HISTORY file in the sudo distribution (https://www.sudo.ws/history.html) for a brief history of sudo.
AUTHORSMany people have worked on sudo over the years; this version consists of code written primarily by:
An Todd C. Miller
See the CONTRIBUTORS file in the sudo distribution (https://www.sudo.ws/contributors.html) for an exhaustive list of people who have contributed to sudo
BUGSIf you feel you have found a bug in sudo please submit a bug report at https://bugzilla.sudo.ws/
SUPPORTLimited free support is available via the sudo-users mailing list, see https://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search the archives.
DISCLAIMERsudo is provided ``AS IS'' and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. See the LICENSE file distributed with sudo or https://www.sudo.ws/license.html for complete details.