SYNOPSIS
esorex xsh_mdark [OPTIONS] FILE.sof
DESCRIPTION
This recipe creates a master dark frame Input Frames :- A set of n RAW frames (Format=RAW, n >=3, Tag = DARK_arm)
- [UVB,VIS] A master bias frame (Format=PRE, Tag = MASTER_BIAS_arm)
- [OPTIONAL] A map of non linear bad pixels (Format=QUP, Tag = BP_MAP_NL_arm)
- [OPTIONAL] A map of reference bad pixels (Format = QUP,RAW, Tag = BP_MAP_RP_arm) Products :
- A master dark frame (Format=PRE, PRO.CATG = MASTER_DARK_arm)
A dark frame, (Format=PRE, PRO.CATG = DARK_arm)
OPTIONS
- --keep-temp <str>
- If 'no', temporary files are deleted. (str; default: 'no'). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.keep-temp [default = no].
- --debug-level <str>
- Additional xshooter debug level. One of 'none', 'low', 'medium', 'high' (str; default: 'none'). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.debug-level [default = none].
- --time-stamp <bool>
- Add timestamp to product file name. (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.time-stamp [default = False].
- --decode-bp <long>
- Integer representation of the bits to be considered bad when decoding the bad pixel mask pixel values. Most frequent codes relevant for the user: 0: good pixel, 8: pick-up noise, 16: cosmic-ray removed, 32: cosmic-ray unremoved, 128: calibration file defect, 256: hot pixel, 512: dark pixel, 4096: A/D converted saturation, 32768: non linear pixel, 1048576: extrapolated flux in NIR, 4194304: Interpolated flux during extraction. (long; default: 2144337919). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.decode-bp [default = 2144337919].
- --pre-overscan-corr <long>
- pre-overscan correction.0: no correction1: mean overscan correction2: mean prescan correction3: (mean pre+mean overscan)/2 correction (long; default: 1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.pre-overscan-corr [default = 1].
- --stack-method <str>
- Method used to build master frame. (str; default: 'median'). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.stack-method [default = median].
- --klow <float>
- Kappa used to clip low level values, when method is set to 'mean' (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.klow [default = 5.0].
- --khigh <float>
- Kappa used to clip high level values, when method is set to 'mean' (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.khigh [default = 5.0].
- --bp-output <bool>
- Flag indicating whether the noise bad pixel map is to be computed (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.bp-output [default = False].
- --crh-clip-kappa <float>
- Kappa value in sigma clipping during CRH rejection using multiple frames (float; default: -1.0). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.crh-clip-kappa [default = -1.0].
- --crh-clip-niter <long>
- Number of iterations in sigma clipping during CRH rejection using multiple frames (long; default: 3). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.crh-clip-niter [default = 3].
- --crh-clip-frac <float>
- Minimal ratio of points accepted / total in sigma clipping during CRH rejection using multiple frames (float; default: 0.7). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.crh-clip-frac [default = 0.7].
- --noise-clip-kappa <float>
- Multiple of sigma in sigma clipping (float; default: 9.0). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.noise-clip-kappa [default = 9.0].
- --noise-clip-niter <long>
- Number of iterations in sigma clipping (long; default: 5). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.noise-clip-niter [default = 5].
- --noise-clip-frac <float>
- Minimal fractions of bad pixel allowed (float; default: 0.7). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.noise-clip-frac [default = 0.7].
- --noise-clip-diff <float>
- Minimum relative change in sigma for sigma clipping (float; default: 0.0). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.noise-clip-diff [default = 0.0].
- --noise-lower-rejection <float>
- Lower rejection percentile to flag bad pixels via noise (float; default: 10.0). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.noise-lower-rejection [default = 10.0].
- --noise-higher-rejection <float>
- Upper rejection percentile to flag bad pixels via noise (float; default: 10.0). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.noise-higher-rejection [default = 10.0].
- --ref1_llx <long>
- Lower left X of reference region (long; default: -1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.ref1_llx [default = -1].
- --ref1_lly <long>
- Lower left Y of reference region (long; default: -1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.ref1_lly [default = -1].
- --ref1_urx <long>
- Upper right X of reference region (long; default: -1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.ref1_urx [default = -1].
- --ref1_ury <long>
- Upper right Y of reference region (long; default: -1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.ref1_ury [default = -1].
- --ron_llx <long>
- Lower left X of reference region to measure RON (long; default: -1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.ron_llx [default = -1].
- --ron_lly <long>
- Lower left Y of reference region to measure RON (long; default: -1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.ron_lly [default = -1].
- --ron_urx <long>
- Upper right X of reference region to measure RON (long; default: -1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.ron_urx [default = -1].
- --ron_ury <long>
- Upper right Y of reference region to measure RON (long; default: -1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.ron_ury [default = -1].
- --ron_hsize <long>
- Sampling area size (long; default: 4). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.ron_hsize [default = 4].
- --ron_nsamples <long>
- Number of random samples (long; default: 100). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.ron_nsamples [default = 100].
- --fpn_llx <long>
- Lower left reference area X coordinate for Fixed Pattern Noise computation (long; default: -1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.fpn_llx [default = -1].
- --fpn_lly <long>
- Lower left reference area Y coordinate for Fixed Pattern Noise computation (long; default: -1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.fpn_lly [default = -1].
- --fpn_urx <long>
- Upper right reference area X coordinate for Fixed Pattern Noise computation (long; default: -1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.fpn_urx [default = -1].
- --fpn_ury <long>
- Upper right reference area Y coordinate for Fixed Pattern Noise computation (long; default: -1). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.fpn_ury [default = -1].
- --fpn_hsize <long>
- Sample size for Fixed Pattern Noise computation (long; default: 2). The full name of this option for the EsoRex configuration file is xsh.xsh_mdark.fpn_hsize [default = 2].
- --fpn_nsamples <long>
-
Number of sampling points for Fixed Pattern Noise computation (long;
default: 1000). The full name of this option for the EsoRex configuration
file is xsh.xsh_mdark.fpn_nsamples [default = 1000].
Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.
VERSION
xsh_mdark 2.7.1
BUG REPORTS
Please report any problems to [email protected]. Alternatively, you may send a report to the ESO User Support Department <[email protected]>.
LICENSE
This file is part of the X-shooter Instrument Pipeline Copyright (C) 2006 European Southern ObservatoryThis program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA