xsh_respon_slit_offset(7) Compute the response function in SLIT and on/off mode

SYNOPSIS

esorex xsh_respon_slit_offset [OPTIONS] FILE.sof

DESCRIPTION

This recipe reduces science exposure in SLIT configuration and on/off mode Input Frames :
  - A set of n Science frames ( n even ),       Tag = STD_FLUX_SLIT_OFFSET_arm, SKY_SLIT_arm
  - Spectral format table (Tag = SPECTRAL_FORMAT_TAB_arm)
  - A master flat frame (Tag = MASTER_FLAT_SLIT_arm)
  - An order table frame(Tag = ORDER_TABLE_EDGES_SLIT_arm)
  - A wavelength calibration solution frame(Tag = WAVE_TAB_2D_arm)
  - [OPTIONAL] Table with dispersion coefficients (Tag = DISP_TAB_arm)
  - [OPTIONAL] A telluric model catalog (Tag = TELL_MOD_CAT_arm arm=VIS,NIR)
  - A standard star fluxes catalog (Tag = FLUX_STD_CATALOG_arm Type = FLX)
  - A table to set response sampling points (Tag = RESP_FIT_POINTS_CAT_arm)
  - An atmospheric extinction table (Tag = ATMOS_EXT_arm)
  - [OPTIONAL] An master response curve table (Tag = MRESPONSE_MERGE1D_SLIT_arm)
    if provided this is the one used to flux calibrate the spectra Products : Products :
  - [If STD is in catal] The response ord-by-ord function (Tag = RESPONSE_ORDER1D_SLIT_arm)
  - [If STD is in catal] The response merged function (Tag = RESPONSE_MERGE1D_SLIT_arm)
  - PREFIX_ORDER2D_arm extracted spectrum, order-by-order, 2D
  - PREFIX_ORDER1D_arm extracted spectrum, order-by-order, 1D
  - PREFIX_MERGE2D_arm merged spectrum, 2D
  - PREFIX_MERGE1D_arm merged spectrum, 1D
 - [If STD is in catal] Flux calibrated order-by-order 2D spectrum (Tag = PREFIX_FLUX_ORDER2D_arm)
 - [If STD is in catal] Flux calibrated order-by-order 1D spectrum (Tag = PREFIX_FLUX_ORDER1D_arm)
 - [If STD is in catal] Flux calibrated merged 2D spectrum (Tag = PREFIX_FLUX_MERGE2D_arm)
 - [If STD is in catal] Flux calibrated merged 1D spectrum (Tag = PREFIX_FLUX_MERGE1D_arm)
 - PREFIX_SKY_arm, 2D sky frame
 - SKY_SLIT_ORDER2D_arm, 2D sky image (order-by-order)
 - SKY_SLIT_MERGE2D_arm, 2D sky image (merged)
 - [If STD is in catal] The efficiency (Tag = EFFICIENCY_arm)
 - PREFIX_WAVE_MAP_arm, wave map image
 - PREFIX_SLIT_MAP_arm, slit map image
 - where PREFIX is SCI, FLUX, TELL if input raw DPR.TYPE contains OBJECT or FLUX or TELLURIC

OPTIONS

--keep-temp <str>
If 'no', temporary files are deleted. (str; default: 'no'). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.keep-temp [default = no].
--debug-level <str>
Additional xshooter debug level. One of 'none', 'low', 'medium', 'high' (str; default: 'none'). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.debug-level [default = none].
--time-stamp <bool>
Add timestamp to product file name. (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.time-stamp [default = False].
--decode-bp <long>
Integer representation of the bits to be considered bad when decoding the bad pixel mask pixel values. Most frequent codes relevant for the user: 0: good pixel, 8: pick-up noise, 16: cosmic-ray removed, 32: cosmic-ray unremoved, 128: calibration file defect, 256: hot pixel, 512: dark pixel, 4096: A/D converted saturation, 32768: non linear pixel, 1048576: extrapolated flux in NIR, 4194304: Interpolated flux during extraction. (long; default: 2144337919). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.decode-bp [default = 2144337919].
--pre-overscan-corr <long>
pre-overscan correction.0: no correction1: mean overscan correction2: mean prescan correction3: (mean pre+mean overscan)/2 correction (long; default: 1). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.pre-overscan-corr [default = 1].
--removecrhsingle-sigmalim <float>
Poisson fluctuation threshold to flag CRHs (see van Dokkum, PASP,113,2001,p1420-27) (float; default: 20.0). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.removecrhsingle-sigmalim [default = 20.0].
--removecrhsingle-flim <float>
Minimum contrast between the Laplacian image and the fine structure image that a point must have to be flagged as CRH. (see van Dokkum, PASP,113,2001,p1420-27) (float; default: 2.0). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.removecrhsingle-flim [default = 2.0].
--removecrhsingle-niter <long>
Max number of iterations (long; default: 4). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.removecrhsingle-niter [default = 4].
--rectify-kernel <str>
Name of the Interpolation Kernel Used. Possible values are: tanh, sinc, sinc2, lanczos, hamming, hann. (str; default: 'tanh'). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.rectify-kernel [default = tanh].
--rectify-radius <float>
Rectify Interpolation radius [bin units]. (float; default: 2.0). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.rectify-radius [default = 2.0].
--rectify-bin-lambda <float>
Wavelength step in the output spectrum [nm] (float; default: -1.0). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.rectify-bin-lambda [default = -1.0].
--rectify-bin-slit <float>
Spatial step along the slit in the output spectrum [arcsec] (float; default: -1.0). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.rectify-bin-slit [default = -1.0].
--localize-method <str>
Localization method (MANUAL, MAXIMUM, GAUSSIAN) used to detect the object centroid and height on the slit (str; default: 'MANUAL'). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.localize-method [default = MANUAL].
--localize-chunk-nb <long>
Number of chunks in the full spectrum to localize the object (long; default: 10). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.localize-chunk-nb [default = 10].
--localize-thresh <float>
Threshold relative to the peak intensity below which the edges of the object are detected for MAXIMUM localization (float; default: 0.1). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.localize-thresh [default = 0.1].
--localize-deg-lambda <long>
Degree in lambda in the localization polynomial expression slit=f(lambda), used only for MAXIMUM and GAUSSIAN (long; default: 0). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.localize-deg-lambda [default = 0].
--localize-slit-position <float>
Object position on the slit for MANUAL localization [arcsec] (float; default: 0.0). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.localize-slit-position [default = 0.0].
--localize-slit-hheight <float>
Object half height on the slit for MANUAL localization [arcsec] (float; default: 2.0). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.localize-slit-hheight [default = 2.0].
--localize-kappa <float>
Kappa value for sigma clipping in the localization polynomial fit (float; default: 3.0). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.localize-kappa [default = 3.0].
--localize-niter <long>
Number of iterations for sigma clipping in the localization polynomial fit (long; default: 3). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.localize-niter [default = 3].
--localize-use-skymask <bool>
TRUE if we want to mask sky lines using SKY_LINE_LIST file. (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.localize-use-skymask [default = False].
--stdextract-interp-hsize <long>
Half size of mask used to define object cross order profile (long; default: 30). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.stdextract-interp-hsize [default = 30].
--combinenod-method <str>
Combination method for nodded frames (MEDIAN, MEAN) (str; default: 'MEAN'). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.combinenod-method [default = MEAN].
--gen-sky <bool>
if TRUE a 2D sky frame, a 2D rectified, a 2D merged sky are generated (bool; default: True). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.gen-sky [default = True].
--correct-tellurics <bool>
TRUE if during response computation we apply telluric correction (bool; default: True). The full name of this option for the EsoRex configuration file is xsh.xsh_respon_slit_offset.correct-tellurics [default = True].

Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.

VERSION

xsh_respon_slit_offset 2.7.1

AUTHOR

D. Bramich, A.Modigliani <[email protected]>

BUG REPORTS

Please report any problems to [email protected]. Alternatively, you may send a report to the ESO User Support Department <[email protected]>.

LICENSE

This file is part of the X-shooter Instrument Pipeline Copyright (C) 2006 European Southern Observatory

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA