SYNOPSIS

esorex muse_dark [OPTIONS] FILE.sof

DESCRIPTION

This recipe combines several separate dark images into one master dark file. The master dark contains the combined pixel values of the raw dark exposures, with respect to the image combination method used and normalization time specified. Processing trims the raw data and records the overscan statistics, subtracts the bias (taking account of the overscan, if --overscan is not &none&) from each raw input image, converts them from adu to count, scales them according to their exposure time, and combines them using input parameters. Hot pixels are then identified using image statistics and marked in the data quality extension. The combined image is normalized to the specified exposure time. QC statistics are computed on the output master dark.

OPTIONS

--nifu <long>

IFU to handle. If set to 0, all IFUs are processed serially. If set to -1, all IFUs are processed in parallel. (long; default: 0). The full name of this option for the EsoRex configuration file is muse.muse_dark.nifu [default = 0].

--overscan <str>

If this is "none", stop when detecting discrepant overscan levels (see ovscsigma), for "offset" it assumes that the mean overscan level represents the real offset in the bias levels of the exposures involved, and adjusts the data accordingly; for "vpoly", a polynomial is fit to the vertical overscan and subtracted from the whole quadrant. (str; default: 'vpoly'). The full name of this option for the EsoRex configuration file is muse.muse_dark.overscan [default = vpoly].

--ovscreject <str>

This influences how values are rejected when computing overscan statistics. Either no rejection at all ("none"), rejection using the DCR algorithm ("dcr"), or rejection using an iterative constant fit ("fit"). (str; default: 'dcr'). The full name of this option for the EsoRex configuration file is muse.muse_dark.ovscreject [default = dcr].

--ovscsigma <float>

If the deviation of mean overscan levels between a raw input image and the reference image is higher than |ovscsigma x stdev|, stop the processing. If overscan="vpoly", this is used as sigma rejection level for the iterative polynomial fit (the level comparison is then done afterwards with |100 x stdev| to guard against incompatible settings). Has no effect for overscan="offset". (float; default: 30.0). The full name of this option for the EsoRex configuration file is muse.muse_dark.ovscsigma [default = 30.0].

--ovscignore <long>

The number of pixels of the overscan adjacent to the data region of the CCD that are ignored when computing statistics or fits. (long; default: 3). The full name of this option for the EsoRex configuration file is muse.muse_dark.ovscignore [default = 3].

--combine <str>

Type of image combination to use. (str; default: 'sigclip'). The full name of this option for the EsoRex configuration file is muse.muse_dark.combine [default = sigclip].

--nlow <long>

Number of minimum pixels to reject with minmax. (long; default: 1). The full name of this option for the EsoRex configuration file is muse.muse_dark.nlow [default = 1].

--nhigh <long>

Number of maximum pixels to reject with minmax. (long; default: 1). The full name of this option for the EsoRex configuration file is muse.muse_dark.nhigh [default = 1].

--nkeep <long>

Number of pixels to keep with minmax. (long; default: 1). The full name of this option for the EsoRex configuration file is muse.muse_dark.nkeep [default = 1].

--lsigma <float>

Low sigma for pixel rejection with sigclip. (float; default: 3.0). The full name of this option for the EsoRex configuration file is muse.muse_dark.lsigma [default = 3.0].

--hsigma <float>

High sigma for pixel rejection with sigclip. (float; default: 3.0). The full name of this option for the EsoRex configuration file is muse.muse_dark.hsigma [default = 3.0].

--scale <bool>

Scale the individual images to a common exposure time before combining them. (bool; default: True). The full name of this option for the EsoRex configuration file is muse.muse_dark.scale [default = True].

--normalize <float>

Normalize the master dark to this exposure time (in seconds). To disable normalization, set this to a negative value. (float; default: 3600.0). The full name of this option for the EsoRex configuration file is muse.muse_dark.normalize [default = 3600.0].

--hotsigma <float>

Sigma level, in terms of median deviation above the median dark level, above which a pixel is detected and marked as 'hot'. (float; default: 5.0). The full name of this option for the EsoRex configuration file is muse.muse_dark.hotsigma [default = 5.0].

--merge <bool>

Merge output products from different IFUs into a common file. (bool; default: False). The full name of this option for the EsoRex configuration file is muse.muse_dark.merge [default = False].

Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.

VERSION

muse_dark 1.6.2

AUTHOR

Peter Weilbacher <[email protected]>

LICENSE

This file is part of the MUSE Instrument Pipeline Copyright (C) 2005, 2015 European Southern Observatory

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02111-1307 USA